journal article·2016-08

Deterioration of mortars exposed to sulfate attack under electrical field

Qian Huang, Chong Wang, Qianpu Zeng, Changhui Yang, Chaoqun Luo, Kai Yang

Publisher page

Abstract

Abstract The damage process of plain and blended cement mortars subjected to sulfate attack under electrical field was investigated in this paper. The deterioration of mortars was investigated by measuring the loss of compressive strength. To identify the changes of microstructure and mineral phases after the test, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis were performed on the selected samples. The results indicated that compared with sulfate attack alone, the combination of sulfate attack and electrical field accelerated the damage process of mortars, which can be explained through two different mechanisms. On the one hand, Ca2+ ions directionally moved and then leached out from mortars under the electrical field, leading to the dissolution of portlandite as well as the decomposition of C–S–H gel at the later stage. On the other hand, the electrical field accelerated the migration of sulfate ions and then they reacted with hydration products to form massive ettringite and gypsum, which resulted in the microcracks and strength loss of mortars. Moreover, the deterioration of the mortar blended with fly ash was still visible in spite of its better chemical resistance. The strength loss of limestone powder incorporated mortar increased in comparison with Portland cement mortar as a result of an increase in porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Electrokinetic Soil Remediation Techniques · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Evolution of surface hardness of concrete under sulfate attack10.1016/j.conbuildmat.2013.11.107 ↗
2. The effect of temperature on the rate of sulfate attack of Portland cement blended mortars in Na2SO4 solution10.1016/j.cemconres.2015.02.024 ↗
3. The effect of C3A content on sulfate durability of Portland limestone cement mortars10.1016/j.conbuildmat.2012.04.091 ↗
4. Behaviour of foam concrete under sulphate environments10.1016/j.cemconcomp.2012.03.007 ↗
5. Mechanism of sulfate attack: a fresh look Part 1: summary of experimental results10.1016/S0008-8846(02)00724-X ↗
6. Durability of concrete exposed to sulfate attack under flexural loading and drying–wetting cycles10.1016/j.conbuildmat.2012.05.033 ↗
7. Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading10.1016/j.cemconres.2008.12.003 ↗
8. Sulfate resistance of plain and blended cements exposed to wetting–drying and heating–cooling environments10.1016/j.conbuildmat.2006.05.012 ↗
9. Concrete deterioration mechanisms under combined sulfate attack and flexural loading10.1061/(ASCE)MT.1943-5533.0000538 ↗
10. Investigations on stress corrosion of hardened cement pastes10.1016/S0008-8846(00)00328-8 ↗
11. Behavior of high-performance concrete under ammonium nitrate solution and sustained load
12. Durability of concrete under sulfate attack exposed to freeze-thaw cycles10.1016/j.coldregions.2014.12.006 ↗
13. Corrosion behavior of steel in concrete in the presence of stray current10.1016/j.corsci.2006.05.048 ↗
14. Experimental observations of stray current effects on steel fibres embedded in mortar10.1016/j.corsci.2013.03.014 ↗
15. Leaching tests on different mortars using accelerated electrochemical method10.1016/S0008-8846(00)00377-X ↗
16. Accelerated sulfate attack on mortars using electrical pulse10.1016/j.conbuildmat.2015.07.034 ↗
17. GB/T 50476-08
18. GB/T 176-08
19. GB/T 15452-09
20. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
21. Influence of temperature on the hydration products of low pH cements10.1016/j.cemconres.2012.03.009 ↗
22. Influence of the Ca/Si ratio of the C–S–H phase on the interaction with sulfate ions and its impact on the ettringite crystallization pressure10.1016/j.cemconres.2014.12.002 ↗
23. Ma · 2013
24. Effect of mix composition and water–cement ratio the sulfate resistance of blended cements10.1016/j.cemconcomp.2006.11.007 ↗
25. Properties of concrete with pumice powder and fly ash as cement replacement materials10.1016/j.conbuildmat.2015.03.026 ↗
26. The effects of grinding on the properties of Portland-limestone cement10.1016/j.conbuildmat.2013.07.053 ↗
27. Two-scale modeling of transport properties of cement paste: formation factor, electrical conductivity and chloride diffusivity10.1016/j.commatsci.2015.08.048 ↗
28. Mercury intrusion porosimetry in concrete technology: tips of measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
29. Mechanisms of deterioration in cement-based materials and in lime mortar
30. Sulfate resistance and carbonation of plain and blended cements10.1016/j.cemconcomp.2005.09.001 ↗
31. Sulfate resistance of cement-reduced eco-friendly concretes10.1016/j.cemconcomp.2014.09.020 ↗