Equivalent maturity for ambient temperature effect on fracture parameters of site-casting dam concrete
Source abstract
Abstract
Abstract This paper presents the influence of ambient temperature on the fracture properties of site-casting (or cast in-situ in other words) dam concrete. By virtue of the mixing tower system in the site of a super-high arch dam, the wedge splitting specimens with the maximum aggregate size of 150 mm were poured in summer and in winter seasons, respectively. The variations of fracture parameters obtained by experiment with different age were revealed, and the results show that the dam concretes poured in summer and in winter seasons show much difference in fracture characteristics at the age of 28 days, however, with the increase of age, the difference in fracture behavior decreased, and was almost zero at the age of 180 days. On top of that, by introducing the concept of equivalent maturity, the relationships between fracture parameters of site-casting dam concrete and equivalent maturity were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dam Engineering and Safety · Rock Mechanics and Modeling · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Later age strength prediction by a modified maturity model
2. Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition10.1016/j.cemconres.2004.07.037 ↗
3. Influence of cold weather during casting and curing on the stiffness and strength of concrete10.1016/j.conbuildmat.2013.03.016 ↗
4. Estimation of the modulus of elasticity for dam concrete10.1016/S0008-8846(97)00214-7 ↗
5. Statistical determination of cracking probability for mass concrete10.1061/(ASCE)MT.1943-5533.0000947 ↗
6. Effect of temperature and humidity on fracture energy of concrete
7. The effect of exposure to elevated temperatures on the fracture energy of plain concrete10.1007/BF02486347 ↗
8. Variation of the fracture toughness of concrete with temperature10.1016/S0950-0618(97)00005-6 ↗
9. Residual fracture properties of concrete subjected to elevated temperatures10.1617/s11527-012-9823-4 ↗
10. Influence of age of loading, water-cement ratio and rate of loading on fracture energy of concrete10.1007/BF02472745 ↗
11. Fracture toughness of concrete at early ages
12. Effect of aging on the fracture characteristics and brittleness of a high-strength concrete10.1016/S0008-8846(97)00276-7 ↗
13. Fracture characteristics of concrete at early ages10.1016/j.cemconres.2003.09.011 ↗
14. Results of three comparative test series for determining the fracture energy GF of concrete10.1007/BF02472416 ↗
15. Fracture of concrete in uniaxial tensile experiments as influenced by curing conditions10.1016/0013-7944(90)90166-E ↗
16. Fracture mechanical behavior of concrete and the condition of its fracture surface10.1016/j.cemconres.2009.03.011 ↗
17. Effect of aggregate type on mechanical behavior of dam concrete
18. Comparison between mechanical properties of dam concrete and sieved concrete10.1061/(ASCE)0899-1561(2008)20:4(321) ↗
19. Fracture behavior of site-casting dam concrete
20. DL/T 5150-2001 · 2002
21. SL 352-2006 · 2006
22. ASTM C 496 · 2002
23. BS EN 12390 · 2000
24. Two parameter fracture model for concrete10.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
25. Effective crack model for the determination of fracture toughness (KICe) of concrete10.1016/0013-7944(90)90146-8 ↗
26. Determination of double-K criterion for crack propagation in quasi-brittle fracture, part II: analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗
27. Determination of Double-K criterion for crack propagation in quasi-brittle fracture, Part III: compact tension specimens and wedge splitting specimens10.1023/A:1018788611620 ↗
28. Steam curing of concrete10.1680/macr.1949.1.2.79 ↗
29. Principles underlying the steam curing of concrete at atmospheric pressure
30. Maturity computer for controlling curing and hardening of concrete
31. Concrete strength estimation at early ages: modification of the method of equivalent age
32. Compressive strength development of concrete with different curing time and temperature10.1016/S0008-8846(98)00164-1 ↗
33. Application of maturity approach to setting times
34. Effect of temperature on hydration of cementitious materials
35. Heat of hydration models for cementitious materials
36. Methods for calculating activation energy for portland cement
37. Maturity method evaluated for various cementitious materials10.1061/(ASCE)0899-1561(2007)19:12(1017) ↗
38. A new procedure to ensure structural safety based on the maturity method and limit state theory10.1016/j.conbuildmat.2012.04.040 ↗
39. Relationship between fracture parameters with an equivalent maturity of site-casting dam concrete