journal article·2016-10

Effect of fiber length and surface characteristics on the mechanical properties of cementitious composites

Antroula V. Georgiou, Stavroula J. Pantazopoulou

Publisher page

Abstract

Abstract A disadvantage of conventional concrete is its low flexural strength and ductility in tension. Cracks form when the tensile strength of conventional concrete, which is limited, is exceeded due to various actions (loads, restrained shrinkage, temperature variation, chemical reactivity) accentuating the effects of carbonation and chloride-induced corrosion of concrete and reinforcement, thereby compromising the residual service life and strength of concrete members. Addition of fibers to enhance the flexural capacity of structural materials through crack control is an ancient idea that is now spearheading novel developments in the area of high-performance cementitious materials. Currently, the state of the art is focused on the use of synthetic fibers in self-consolidating, fine-aggregate cementitious mixes that demonstrate strain hardening properties in tension, outstanding crack control and improved durability performance. This paper deals with experimental characterization of the performance of a material of this class, reinforced with PVA fibers (polyvinyl alcohol with original hydrophilic surface properties). Parameter of study is the length of the fibers as well as the fiber surface properties which are chemically modified through pertinent surfactants. The parametric study compares the mechanical response of FRC to that of plain (unreinforced) cementitious material of the same composition, through tests of material samples in uniaxial compression, extension, splitting and flexure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Proposed classification of HPFRC composites based on their tensile response10.1617/s11527-006-9103-2 ↗
2. H. Yokota, K. Rokugo, N. Sakata, JSCE recommendations for design and construction of high performance fiber reinforced cement composite with multiple fine cracks, in: High Performance Fiber Reinforced Cement Composites 2: Proceedings of the International Workshop, 1996.
3. H. Stang, V.C. Li, Classification of fiber reinforced cementitious materials for structural applications, in: 6th RILEM Symp. Fiber-Reinforced Concr. – BEFIB 2004, No. September, 2004, pp. 197–218.
4. T. Kanakubo, K. Shimizu, Tensile characteristics evaluation of DFRCC—round Robin test results by JCI-TC, in: International RILEM Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications, vol. RILEM Proc, No. 1, 2005, pp. 27–36.
5. Tensile characteristics evaluation method for ductile fiber-reinforced cementitious composites10.3151/jact.4.3 ↗
6. L. Ostergaard, R. Walter, J. Olesen, Method for determination of tensile properties of engineered cementitious composites (ECC), in: Proc. ConMat’05, 2005.
7. Concrete fracture models: testing and practice10.1016/S0013-7944(01)00084-4 ↗
8. C293 ASTM Standard, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), 2010.
9. A.V. Georgiou, S.J. Pantazopoulou, M.F. Petrou, Experimental analysis of fiber reinforced cementitious composites with increased toughness, in: 10th HSTAM International Congress on Mechanics, 2013, pp. 25–27.
10. Large-scale processing of engineered cementitious composites
11. ASTM C618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use, 2008.
12. ASTM C496 · 2006 · 1
13. ASTM C78, C78M-10 – Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), 2010.
14. ASTM C1609, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) 1, No. April, 2010, pp. 1–9.
15. FIB Model Code, Model Code 2010, Federation Internationale du Beton (fib), 2010.
16. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
17. Eurocode 2, Design of Concrete Structures— Part 1–1: General rules and rules for buildings, EN1992–1st–1st ed., 2004.
18. Limitations of FRP jacketing in confining old-type reinforced concrete members in axial compression10.1061/(ASCE)1090-0268(2006)10:1(13) ↗
19. Flexural members with confined concrete10.1061/JSDEAG.0002957 ↗
20. Naaman · 1972
21. N. Archontas, S.J. Pantazopoulou, Microstructural aspects of the mechanical behavior of nanomodified cementitious materials, in: NICOM 4, 2012, No. Fig. 1.
22. A. Georgiou, S. Pantazopoulou, M. Petrou, Increasing ductility of FRCC with proprietary coating agents, in: 10th fib International PhD Symposium in Civil Engineering, 2014.
23. Timoshenko · 1959
24. Chen · 1982