Preparation and characteristics of magnesium phosphate cement based porous materials
Source abstract
Abstract
Abstract Magnesium phosphate cement based porous materials (MPCPM) were prepared by means of a chemical foaming process using zinc powders as foaming agent. The influence of the zinc content, W/S ratio and particle size of ammonium dihydrogen phosphate (ADP) on the viscosity, temperature evolution, compressive strength, flexural strength and thermal conductivity of the MPCPM was investigated. The results indicate that with higher content of zinc powder and W/S ratio, a longer hardening time of slurry, higher viscosity values, lower hydration temperature, less mechanical strength and lower thermal conductivity of the MPCPM can be obtained. The effects of the particle size of ADP on the properties of MPCPM are analogous to those of the content of zinc powder and W/S. Strong linear relationships can be found between the dry density or porosity and the compressive strength or thermal conductivity of prepared porous materials. The results also show that the MPCPM has good potential to be used for fireproofing doors and high temperature furnace insulation lining due to its light weight, high strength, and thermal and acoustic insulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Mechanical properties of ceramics–cement based porous material under impact loading10.1016/j.matdes.2013.10.046 ↗
2. Impacts of potassium permanganate (KMnO4) catalyst on properties of hydrogen peroxide (H2O2) foamed porous cement slurry10.1016/j.conbuildmat.2016.02.076 ↗
3. Cellular concrete properties and the effect of synthetic and protein foaming agents10.1016/j.conbuildmat.2013.03.024 ↗
4. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
5. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
6. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
7. Microstructural investigations on aerated concrete10.1016/S0008-8846(00)00199-X ↗
8. A comparison between different foaming methods for the synthesis of light weight geopolymers10.1016/j.ceramint.2014.05.108 ↗
9. Magnesium potassium phosphate cement paste: degree of reaction, porosity and pore structure10.1016/j.cemconres.2014.07.012 ↗
10. Properties and applications of magnesia–phosphate cement mortar for rapid repair of concrete10.1016/S0008-8846(00)00419-1 ↗
11. Effect of aggregates and water contents on the properties of magnesium phospho-silicate cement10.1016/j.cemconcomp.2004.03.003 ↗
12. Experimental study of magnesia and M/P ratio influencing properties of magnesium phosphate cement10.1016/j.conbuildmat.2014.04.136 ↗
13. Effect of disodium hydrogen phosphate on hydration and hardening of magnesium potassium phosphate cement10.1061/(ASCE)MT.1943-5533.0000305 ↗
14. Property evaluation of magnesium phosphate cement mortar as patch repair material10.1016/j.conbuildmat.2009.10.039 ↗
15. Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio10.1016/j.cemconres.2014.10.019 ↗
16. Leaching behaviour of magnesium phosphate cements containing high quantities of heavy metals10.1016/j.jhazmat.2009.10.077 ↗
17. Optimizing the dimensions of magnesium ammonium phosphate to maximize its ammonia uptake ability10.1016/j.apt.2012.10.001 ↗
18. Magnesium ammonium phosphate formation, recovery and its application as valuable resources: a review10.1002/jctb.3936 ↗
19. Recent progress in chemically bonded phosphate ceramics
20. New type of super-lightweight magnesium phosphate cement foamed concrete10.1061/(ASCE)MT.1943-5533.0001044 ↗
21. Tailoring the strength and porosity of rapid-hardening magnesia phosphate paste via the pre-foaming method
22. Mechanism of setting reaction in magnesia-phosphate cements10.1016/S0008-8846(99)00254-9 ↗
23. Influence of magnesia surface on the setting time of magnesia–phosphate cement10.1016/S0008-8846(01)00647-0 ↗
24. Preparation and characterization of high porosity cement-based foam material10.1016/j.conbuildmat.2015.05.032 ↗
25. Hydration/dehydration characteristics of struvite and dittmarite pertaining to magnesium ammonium phosphate cement systems10.1007/BF01130204 ↗
26. Effect of heavy metals and water content on the strength of magnesium phosphate cements10.1016/j.jhazmat.2009.04.091 ↗
27. The effect of porosity on the strength of foamed concrete10.1016/S0008-8846(01)00665-2 ↗
28. Influence of filler type on the properties of foam concrete10.1016/j.cemconcomp.2005.12.001 ↗
29. Influence of various densities and additives on mechanical properties of green foamed concrete
30. Gelim · 2011
31. Models for strength prediction of foam concrete10.1617/s11527-007-9234-0 ↗
32. Models relating mixture composition to the density and strength of foam concrete using response surface methodology10.1016/j.cemconcomp.2006.06.001 ↗
33. Influence of zeolite additive on properties of autoclaved aerated concrete10.1016/j.buildenv.2006.08.003 ↗
34. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
35. The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus10.3389/fmats.2016.00038 ↗
36. Effect of the pore shape on the thermal conductivity of porous media10.1007/s10853-012-6616-7 ↗