Flexural strength of notched concrete beam filled with alkali-activated binders under different types of alkali solutions
Source abstract
Abstract
Abstract This article investigates the flexural strength of notched Portland cement concrete (PCC) beams filled with alkali-activated binders (AAB). The low calcium fly ash (LFA) and ground granulated blast furnace slag (GBFS) are used to develop AAB. The bond strength performance between notched PCC beam and AAB has been studied. A different mix of AABs were investigated: those are low calcium fly ash (LFA) paste, FA + GGBS paste and GGBS paste with three different types of alkaline solutions viz., 10 M sodium hydroxide solution (SH), sodium silicate solution (SS), and 10 M sodium hydroxide mixed with sodium silicate solution solutions (SHSS). The flexural strength of notched PCC beams filled with AABs at different influence factors are tested under three point bending. Test results evident that the flexural strength of PCC notched beams tends to slightly increase with increasing of GBFS content for all kinds of alkaline solutions. The fracture surface of specimens is reasonable to bond strength obtained. The notched PCC beams filled with FA + GBFS activated with SHSS solution provides the highest 28-day flexural strength of 3.57 MPa. This research attempts to use waste materials as a promoter in AAB as an alternative repair material, which is significant in addressing the sustainable use of waste materials in terms of engineering, economical and environmental perspectives.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Metz · 2007 · 447
2. Metakaolin bottom ash blend geopolymer mortar – a feasibility study10.1016/j.conbuildmat.2016.03.149 ↗
3. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
4. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
5. Alkali-activated binders: a review. Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
6. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
7. Hydration kinetics in hybrid binders: early reaction stages10.1016/j.cemconcomp.2013.03.025 ↗
8. A review: the comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
9. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
10. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
11. Properties of alkali-activated fly ash concrete blended with slag
12. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer10.1016/j.conbuildmat.2015.05.001 ↗
13. Marginal lateritic soil stabilized with calcium carbide residue and fly ash geopolymers as a sustainable pavement base material
14. Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash10.1016/j.conbuildmat.2014.08.033 ↗
15. Strength and microstructure evaluation of recycled glass-fly ash geopolymer as low-carbon masonry units10.1016/j.conbuildmat.2016.03.123 ↗
16. Compressive strength, bending and fracture characteristics of high calcium fly ash geopolymer mortar containing portland cement cured at ambient temperature10.1007/s13369-015-1906-4 ↗
17. A way for improving interfacial transition zone between concrete substrate and repair materials10.1016/S0008-8846(02)00840-2 ↗
18. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature10.1016/j.matdes.2013.09.049 ↗
19. High calcium fly ash geopolymer mortar containing Portland cement for use as repair material10.1016/j.conbuildmat.2015.08.139 ↗
20. Potential application of geopolymers as protection coatings for marine concrete III. Field experiment10.1016/j.clay.2012.05.008 ↗
21. Potential application of geopolymers as protection coatings for marine concrete: I. Basic properties10.1016/j.clay.2010.01.014 ↗
22. Potential application of geopolymers as protection coatings for marine concrete: II. Microstructure and anticorrosion mechanism10.1016/j.clay.2010.04.024 ↗
23. An overview on the potential of geopolymers for concrete infrastructure rehabilitation10.1016/j.conbuildmat.2012.07.003 ↗
24. Comparison of methods for evaluating bond strength between concrete substrate and repair materials
25. Development and performance evaluation of very high early strength geopolymer for rapid road repair10.1155/2013/764180 ↗
26. Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substrate surface treatment10.1016/j.conbuildmat.2006.10.005 ↗
27. Effect of sodium hydroxide and sodium silicate solutions on strengths of alkali activated high calcium fly ash containing Portland cement
28. Bond strength of PCC pavement repairs using metakaolin-based geopolymer mortar10.1016/j.cemconcomp.2015.10.009 ↗
29. A novel waterproof, fast setting and high early strength repair material derived from metakaolin geopolymer10.1016/j.conbuildmat.2016.07.058 ↗
30. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
31. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
32. Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates10.1016/j.conbuildmat.2016.02.135 ↗
33. ASTM C618-15, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, Annual Book of ASTM Standard, vol. 04.02, 2015.
34. Christensen · 1979
35. Coupled diffusion of multi-component chemicals in nonsaturated concrete10.12989/cac.2013.11.3.201 ↗
36. Effect of fly ash and slag on the fracture characteristics of high performance concrete10.1007/BF02480576 ↗
37. Investigation of different fracture modes in cement-based materials by acoustic emission10.1016/j.cemconres.2013.02.002 ↗
38. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers10.1016/j.colsurfa.2006.12.064 ↗
39. M.M. Springkel, Ozyildirim, Evaluation of High Performance Concrete Overlays Placed on Route 60 over Lynnhaven Inlet in Virginia, in 2000.
40. Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer10.1016/j.clay.2016.04.005 ↗
41. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
42. Inclusion of carbonation during the life cycle of built and recycled concrete: influence on their carbon footprint10.1007/s11367-010-0191-4 ↗