journal article·2017-03

Pull-out response of macro synthetic fibre from concrete matrix: Effect of loading rate and embedment length

A.J. Babafemi, W.P. Boshoff

Publisher page

Abstract

Abstract The single fibre pull-out response of macro synthetic fibre from concrete matrix has been investigated and reported in this study. Particular attention has been given to the response of the interfacial shear resistance between the matrix and fibre to loading rate at different fibre embedment length. One mix design and one fibre type have been used throughout the experiment while four orders of magnitude of loading rate and three embedment lengths are the variables evaluated. The effect of loading rate on the tensile strength of the macro synthetic fibre under four order of magnitude of loading rates is also reported. All tests were conducted in a controlled climate room at a temperature of 23 ± 1 °C and a relative humidity of 65 ± 5%. Experimental test results have shown that the ultimate tensile strength of the fibres is dependent on the loading rates. Pull-out behaviour from concrete matrix is shown to be slip softening and sensitive to loading rate and embedment length. All fibres pulled out of the concrete matrix without fracturing. Pull-out load increases as the loading rate and the embedment length increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Tensile rate effects in high strength-high ductility concrete10.1016/j.cemconres.2014.11.005 ↗
2. Test methods for FRP – concrete systems subjected to mechanical loads: state-of-the-art review10.1177/073168449501400601 ↗
3. Pull-out and bond of glass-fiber rods embedded in concretes and grout10.1007/BF02472934 ↗
4. Fiber pull-out and slip. I: analytical study10.1061/(ASCE)0733-9445(1991)117:9(2769) ↗
5. Bond-slip mechanisms of steel fibers in concrete
6. Predicting the flexural postcracking performance of steel fiber reinforced concrete from the pull-out of single fibers
7. Pull-out behavior of steel fibers in self-compacting concrete10.1061/(ASCE)MT.1943-5533.0000001 ↗
8. Pull-out behavior of high-strength steel fibers embedded in ultra-high-performance concrete
9. Bond behaviour and flexural performance of structural synthetic fibre-reinforced concrete10.1680/macr.2006.58.6.401 ↗
10. Performance of synthetic macro fibres in reinforced concrete for tunnel linings10.1680/macr.2007.00140 ↗
11. Fracture behavior of concrete members reinforced with structural synthetic fibers10.1016/j.engfracmech.2006.01.032 ↗
12. Pull-out behavior of polypropylene fibers from cementitious matrix10.1016/j.cemconres.2004.02.014 ↗
13. Effect of the fiber geometry on the pull-out response of mechanically deformed steel fibers10.1016/j.cemconres.2012.10.014 ↗
14. Interface strength in glass fibre–polypropylene measured using the fibre pull-out and microbond methods10.1016/j.compositesa.2009.10.005 ↗
15. Effect of strain-rate on the pull-out behaviour of fibres in mortar10.1016/0262-5075(81)90051-8 ↗
16. Bond characteristics of structural polypropylene fibres in concrete with regards to post-crack strength and durable design10.1108/02630800510610143 ↗
17. Pull-out behavior of polypropylene macro-synthetic fibers treated with nano-silica10.1016/j.conbuildmat.2015.02.047 ↗
18. Effect of loading rates on pull-out behavior of high strength steel fibers embedded in ultra-high performance concrete10.1016/j.cemconcomp.2016.03.014 ↗
19. Tensile creep of macro-synthetic fibre reinforced concrete (MSFRC) under uni-axial tensile loading10.1016/j.cemconcomp.2014.08.002 ↗
20. Kobayashi, K., Cho, R., Mechanics of concrete with randomly oriented discontinuous fibres, in: 2nd International Conference on Mechanical Behaviour of Materials, Boston, 1976, pp. 1938–1942.
21. Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete10.1016/j.conbuildmat.2016.03.162 ↗
22. Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes10.1016/j.conbuildmat.2010.12.022 ↗
23. Testing and modelling the creep of cracked macro-synthetic fibre reinforced concrete (MSFRC) under flexural loading10.1617/s11527-016-0795-7 ↗
24. Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrix10.1007/BF00540456 ↗
25. Investigating direct tensile behaviour of high performance fiber reinforced cementitious composites at high strain rates10.1016/j.cemconres.2013.03.018 ↗
26. Characterising the time-dependant behaviour on the single fibre level of SHCC: part 1: mechanism of fibre pull-out creep10.1016/j.cemconres.2009.06.007 ↗
27. On interface property characterization and performance of fiber reinforced cementitious composites
28. Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension10.1016/j.conbuildmat.2016.05.130 ↗
29. Wang · 1989
30. Loading rate effect on pull-out behavior of deformed steel fibers
31. High strain rate effects on direct tensile behavior of high performance fiber reinforced cementitious composites10.1016/j.cemconcomp.2013.10.005 ↗
32. Pull-out behaviour of hooked steel fibres10.1007/BF02483148 ↗
33. Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites10.1016/S1359-835X(00)00068-3 ↗
34. Odendeel · 2015
35. Polymeric fibers pull-out behavior and microstructure as cementitious composites reinforcement10.1080/00405000.2013.773124 ↗