journal article·2017-07Open access

Characterization of the rutting potential of modified asphalt binders and its correlation with the mixture’s rut resistance

Matheus David Inocente Domingos, Adalberto Leandro Faxina, Liedi Légi Bariani Bernucci

Abstract

This study was intended to evaluate the susceptibility of asphalt binders and mixtures to rutting. The binders have the same high PG grade (PG 76-xx) and a dense-graded gradation curve was used to produce the mixtures. Three types of polymers – Elvaloy®, SBS and SBR – and polyphosphoric acid (PPA) were selected. The tests included softening point, oscillatory shear (parameter G∗/sinδ), multiple stress creep and recovery (Jnr) and flow number (FN). The rankings of binder and mixture parameters (Jnr, G∗/sinδ, softening point and FN) are the same only for Jnr and FN, and the applicability of G∗/sinδ to modified materials is questionable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Rheological properties of bitumen modified with ethylene butylacrylate glycidylmethacrylate10.1002/pen.23649 ↗
2. New high-temperature binder specification using multistress creep and recovery
3. Effect of polyphosphoric acid on asphalt binder properties
4. Susceptibility of asphalt binders to rutting: literature review10.1061/(ASCE)MT.1943-5533.0001364 ↗
5. Rheological examination of aging in polymer-modified asphalt10.1061/(ASCE)MT.1943-5533.0001370 ↗
6. Development of binder specification parameters based on characterization of damage behavior
7. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test
8. A new performance related test method for rutting prediction: MSCRT
9. Evaluating permanent deformation in asphalt rubber mixtures10.1016/j.conbuildmat.2009.12.021 ↗
10. Golalipour · 2011
11. Fluência e relaxação sob múltiplas tensões (MSCR): avaliação do desempenho de ligantes asfálticos [Multiple stress creep and recovery (MSCR): analysis of binder performance], Anais do 16o
12. Avaliação do efeito de ligantes asfálticos modificados na resistência à deformação permanente de misturas asfálticas densas [Analysis of the effect of modified asphalt binders on the rutting resistance of dense-graded asphalt mixtures]10.4237/transportes.v21i3.685 ↗
13. Analysis of different test methods for quantifying rutting susceptibility of asphalt binders10.1061/(ASCE)MT.1943-5533.0001553 ↗
14. Correlation of superpave G∗/Sinδ with rutting test results from accelerated loading facility10.3141/1630-07 ↗
15. American Association of State Highway and Transportation Officials (AASHTO), AASHTO M320 – Standard specification for performance-graded asphalt binder, Washington (DC), 2009.
16. Flow number predictive models from volumetric and binder properties10.1016/j.conbuildmat.2014.04.069 ↗
17. Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation10.1016/j.conbuildmat.2013.03.013 ↗
18. Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis10.1080/14680629.2012.657045 ↗
19. American Society for Testing and Materials (ASTM), ASTM D2872 – Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test), West Conshohocken (PA), 2012.
20. American Society for Testing and Materials (ASTM), ASTM D36 – Standard test method for softening point of bitumen (ring-and-ball apparatus), West Conshohocken (PA), 2012.
21. American Society for Testing and Materials (ASTM), ASTM D4402 – Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer, West Conshohocken (PA), 2013.
22. American Society for Testing and Materials (ASTM), ASTM D2493 – Standard practice for viscosity-temperature chart for asphalt binders, West Conshohocken (PA), 2016.
23. Departamento de Estradas de Rodagem, DER/PR ES-P 21/05 – Pavimentação: concreto asfáltico usinado a quente [Paving with hot-mix asphalt concrete], http://www.dtt.ufpr.br/Pavimentacao/Notas/ES-P21-05CAUQ.pdf (accessed 26.01.16). In Portuguese.
24. American Society for Testing and Materials (ASTM) ASTM D7175 – Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer, West Conshohocken (PA), 2015.
25. American Society for Testing and Materials (ASTM) ASTM D7405 – Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer, West Conshohocken (PA), 2015.
26. Asphalt Institute, Guidance on the use of the MSCR test with the AASHTO M320 specification, http://amap.ctcandassociates.com/wp/wp-content/uploads/Guidance-on-Using-MSCR-with-AASHTO-M320_Final.pdf (accessed 02.02.16).
27. L.F.M. Leite, I.A. Tonial, Qualidade dos cimentos asfálticos brasileiros segundo as especificações SHRP [Grading of the Brazilian asphalt cements according to the SHRP specifications]. Anais do 12o. Encontro de Asfalto, IBP, Rio de Janeiro, pp. 94–119, 1994. In Portuguese.
28. Departamento de Estradas de Rodagem do Estado de São Paulo, ET-DE-P00/027 – Concreto asfáltico [Asphalt concrete], ftp://ftp.sp.gov.br/ftpder/normas/ET-DE-P00-027_A.pdf (accessed 26.01.2016). In Portuguese.
29. Witczak · 2002
30. Low temperature rheology of polyphosphoric acid (PPA) added bitumen10.1016/j.conbuildmat.2012.06.011 ↗
31. Polyphosphoric acid–modified asphalt cement: Ontario perspective
32. Field investigation of polyphosphoric acid–modified binders at MnROAD
33. M. Buncher, PPA modification and performance testing, Asphalt – The Magazine of the Asphalt Institute. http://asphaltmagazine.com/ppa-modification-and-performance-testing/, 2016 (accessed 13.05.16).
34. Arshadi · 2013
35. Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions10.1016/j.conbuildmat.2014.02.052 ↗
36. Evaluation of validity of conventional test methods in case of polymer-bitumens