journal article·2017-08

Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods

Wenjun Zhu, Raoul François, Yong Liu

Publisher page

Abstract

Abstract In this paper, the propagation of chloride-induced corrosion of bars embedded in reinforced concrete (RC) beams exposed to a chloride environment was examined. These bars were exposed to chloride environment for various periods. Then, the cracking of the RC beams was observed and the corroded reinforcements were extracted from the beams in order to investigate the corrosion distribution and propagation. The cross-sectional loss and spatial distribution in the longitudinal direction were studied by cutting the residual reinforcement into several small specimens. By analysing the cross-sectional loss results, it was found that the corrosion developed in a stochastic way. However, the corrosion zone developed gradually from the mid-span of the beam to the two ends, and there was a linear relationship between the extent of the corrosion zone and the corrosion period. Similarly, the degree of pitting corrosion and general corrosion also increased. The relationship between pitting corrosion and general corrosion developed along an improved exponential curve, while the pitting factor and the general corrosion showed a logarithmic relationship. The results of this investigation could be treated as an envelope curve, which can be helpful to assess the corrosion state of reinforcements situated in aggressive environment and predict the residual life-cycle of corroded constructions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Load carrying capacity of concrete structures with corroded reinforcement10.1016/S0950-0618(97)00043-3 ↗
2. Chloride attack of reinforced concrete: an overview10.1007/BF02473172 ↗
3. Strategic High Research Program · 1989
4. Effect of corrosion of reinforcement on the mechanical behaviour of highly corroded RC beams10.1016/j.engstruct.2013.04.017 ↗
5. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
6. Influence of long-term chloride diffusion in concrete and the resulting corrosion of reinforcement on the serviceability of RC beams10.1016/j.cemconcomp.2016.05.003 ↗
7. Corrosion damage diagnosis of a reinforced concrete beam after 40 years’ natural exposure in marine environment10.1016/j.cemconres.2005.11.004 ↗
8. Failure mode transitions of corroded deep beams exposed to marine environment for long period10.1016/j.engstruct.2015.04.004 ↗
9. Chloride-induced corrosion of steel in cracked concrete – Part I: Experimental studies under accelerated and natural marine environments10.1016/j.cemconres.2015.08.009 ↗
10. Procedure for the assessment of the residual capacity of corroded B-regions in RC structures10.1016/j.conbuildmat.2016.06.029 ↗
11. Concrete cover cracking due to uniform reinforcement corrosion10.1617/s11527-013-0016-6 ↗
12. Corrosion effects on the mechanical properties of reinforcing steel bars: fatigue and σ-ε behavior10.1016/j.conbuildmat.2015.10.139 ↗
13. Experimental investigation of the relationships between residual cross-section shapes and the ductility of corroded bars10.1016/j.conbuildmat.2014.07.059 ↗
14. Mechanical behaviour of corroded reinforced concrete beams—Part 2: bond and notch effects10.1007/BF02480534 ↗
15. Chloride-induced corrosion of steel reinforcement – mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
16. Structural performance of RC beams in relation with the corroded period in chloride environment10.1617/s11527-014-0270-2 ↗
17. Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam10.1016/j.conbuildmat.2013.11.015 ↗
18. Tensile behavior of corroded steel bars under different strain rates10.1680/macr.15.00062 ↗
19. Prediction of corrosion rate in reinforced concrete structures – a critical review and preliminary results
20. Comparison of two accelerated corrosion techniques for concrete structures
21. Prediction of the residual load-bearing capacity of naturally corroded beams using the variability of tension behavior of corroded steel bars10.1080/15732479.2014.996165 ↗
22. Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion10.1016/j.conbuildmat.2014.08.001 ↗
23. Modelling of the flexural behavior of RC beams subjected to localized and uniform corrosion10.1016/S0141-0296(03)00108-1 ↗
24. B. A. E. L. French regulations for reinforced concrete structures; 1983.
25. Effect of corrosion pattern on the ductility of tensile reinforcement extracted from a 26-year-old corroded beam10.12989/acc2013.01.2.121 ↗
26. Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load10.1016/j.conbuildmat.2009.11.012 ↗
27. Tensile behavior of naturally and artificially corroded steel bars10.1016/j.conbuildmat.2015.10.075 ↗
28. Corrosion degree effect on nominal and effective strengths of naturally corroded reinforcement10.1061/(ASCE)MT.1943-5533.0001599 ↗
29. Distribution of corrosion and pitting factor of steel in corroded beams10.1016/j.conbuildmat.2015.07.119 ↗
30. Mechanical properties of corrosion-damaged reinforcement