Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition
Source abstract
Abstract
Abstract The benefits of internal curing (IC) have been confirmed by extensive laboratory studies under constant room temperature. In practical engineering, sidewall concrete undergoes a variable temperature evolution, which involves significant physical, chemical, and thermal changes during the hydration process at the early age and a high cracking risk at the temperature drop stage. Expansive agent (EA) has always been used to mitigate early-age cracking, but it has limited efficacy in the temperature drop stage and low mechanical properties. This study examines the efficacy of IC through pre-soaked lightweight aggregate (SLWA) and the combined use of SLWA and EA in mitigating shrinkage deformation under constant and variable temperature conditions. Results indicate that SLWA shows a higher efficacy than EA in mitigating shrinkage deformation during the temperature drop stage and can provide continuous expansion at the later stage. The combined use of SLWA and EA exhibits high efficacy in mitigating shrinkage deformation under constant and variable temperature conditions and can limit the reduction of mechanical properties caused by a single EA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Deformation and cracking modeling for early-age sidewall concrete based on the multi-field coupling mechanism10.1016/j.conbuildmat.2015.03.005 ↗
2. Nonlinear water diffusion in nonsaturated concrete
3. Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history10.1016/j.cemconres.2006.11.015 ↗
4. Attempts to measure the cracking tendency of concrete
5. Assessment of post-restrained shrinkage mechanical properties of concrete
6. Effect of cement particle size distribution on performance properties of Portland cement-based materials10.1016/S0008-8846(99)00163-5 ↗
7. Investigation on the plastic shrinkage of cementitious materials under drying conditions: mechanism and theoretical model
8. Influences of Retarders on effectiveness of Calcium oxide expansion agent
9. Hydration kinetics and microscopic analysis of calcium oxide expansion clinker
10. Hydration kinetics of CaO expansion Clinker10.1016/j.conbuildmat.2014.09.016 ↗
11. Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
12. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
13. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
14. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗
15. Protected paste volume in concrete extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
16. Water-entrained cement-based materials: I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
17. Water-entrained cement-based materials: II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
18. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
19. Moisture dependence of thermal expansion in cement-based materials at early ages10.1016/j.cemconres.2013.05.016 ↗
20. Controlling the coefficient of thermal expansion of cementitious materials–a new application for superabsorbent polymers10.1016/j.cemconcomp.2012.08.010 ↗
21. Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage10.1007/BF02482108 ↗
22. Water absorption and electrical conductivity for internally cured mortars with a W/C between 0.30 and 0.4510.1061/(ASCE)MT.1943-5533.0000377 ↗
23. Lightweight aggregate as internal curing agent to limit concrete shrinkage
24. Research on performance improvement of expansive concrete with internal curing agent SAP and its action mechanism
25. Cracking resistance of internal curing shrinkage compensating concrete
26. Influence of internal curing and expansive agent on concrete complex crack resistance
27. Effects of expansive agent and shale pottery on shrinkage reduction of lower water-cement ratio mortar
28. Internal curing – a suitable method for improving the performance of heat-cured concrete10.1016/j.conbuildmat.2016.05.159 ↗
29. Heat evolution of high-volume fly ash concrete10.1016/S0008-8846(01)00755-4 ↗
30. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
31. Effect of silica fume and fly ash on heat of hydration of Portland cement10.1016/S0008-8846(02)00742-1 ↗
32. Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete10.1016/S0008-8846(01)00601-9 ↗
33. Autogenous shrinkage of concrete containing granulated blast-furnace slag10.1016/j.cemconres.2006.01.005 ↗
34. Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete10.1016/j.conbuildmat.2016.09.123 ↗
35. Restrained shrinkage behavior of Self-Compacting Concrete containing ground-granulated blast-furnace slag10.1016/j.conbuildmat.2016.10.115 ↗
36. Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures10.1016/j.conbuildmat.2014.03.023 ↗
37. Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures10.1016/j.cemconcomp.2011.07.006 ↗
38. Mixture proportioning for internal curing
39. Study on the measurement of autogenous shrinkage of high performance concrete
40. Q. Tian, Y.J. Wang, H. Zhang, et al., In-situ monitoring of setting of concrete based on pore water pressure measurement, in: Second International Conference on Microstructural-related Durability of Cementitious Composites, Amsterdam, the Netherlands, 2012.
41. US Department of Commerce. NISTIR 6265 · 1999
42. Nearest-surface distribution functions for polydispersed particle systems10.1103/PhysRevA.45.5530 ↗
43. Measurement of water transport from saturated pumice aggregates to hardening cement paste10.1617/s11527-006-9137-5 ↗
44. Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography10.1016/j.nima.2011.02.012 ↗
45. Internal curing with lightweight aggregate produced from biomass-derived waste10.1016/j.cemconres.2014.01.025 ↗
46. Modeling of water release from superabsorbent polymers during internal curing10.1061/(ASCE)MT.1943-5533.0000448 ↗
47. Saturated lightweight aggregate for internal curing in low w/c mixtures: monitoring water movement using X-ray absorption10.1111/j.1475-1305.2009.00626.x ↗
48. Application of internal curing for mixtures containing high volumes of fly ash10.1016/j.cemconcomp.2012.06.008 ↗
49. Influence of exposure conditions on the efficiency of internal curing in concrete10.1520/ACEM20120023 ↗
50. Moon · 2006