Experimental investigation on loading pattern of railway concrete slabs
Source abstract
Abstract
Abstract Although construction of ballast-less track is booming in recent years, there is a lack of sufficient researches into the design and construction of this system. This research addresses this limitation by investigating the amount of loads transferred from the rail to the support slabs as the main parameter in the design and construction of railway concrete slabs. A comprehensive experimental investigation was conducted in various light and heavy passenger transit lines. The effects of the main influencing parameters including sleeper spacing, rail bending modulus, track stiffness, train speed, and wheel load on the amount of rail seat loads were investigated. The results were analyzed, leading to derive a mathematical expression for the rail seat load and the loading pattern of concrete slabs. The reliability and accuracy of the loading patterns currently used in the analysis and design of concrete slabs were evaluated by comparisons of the experimental results obtained here with those of the current practice. The results obtained have made considerable improvements in the analysis and design of railway concrete slabs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Railway Systems and Energy Efficiency · Civil and Geotechnical Engineering Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Advantages of a new ballastless track form10.1016/j.conbuildmat.2014.06.099 ↗
2. A. Talbot, Stresses in railroad track, Report of the Special Committee on Stresses in Railroad Track. Proceeding of the AREA, Second Progress Report, 1919, 21(1), 645–814.
3. G.M. Magee, Cooperative Research on Wood Ties of the Railroad Tie Association and the Association American Railroads Research and Test Department (1965-1971).
4. R. Clark, V. Lownder, Discrete support track dynamics model, Theory and program guide, British railway Board Railway Research and Development Division Technical Report TM, TS 95 (1979).
5. N.F. Doyle, Railway track design: a review of current practice (1980).
6. J. Eisenmann, Stress distribution in the permanent way due to heavy axle loads and high speeds. Proceedings of AREA (Bulletins). American Railway Engineering Association (AREA), 1970, 71, 24–59.
7. Railroad wood tie design and behavior
8. O’Rourke · 1978
9. Brown · 1978
10. Experimental evaluation of accuracy of current practices in analysis and design of railway track sleepers10.1139/L08-026 ↗
11. Comparisons of the mechanical properties of timber, steel and concrete sleepers
12. Field study of load path in rail and concrete crosstie system
13. Assessing the effects of track input on the response of insulated rail joints using field experiments10.1177/0954409712458496 ↗
14. Field measurement of wheel–rail impact force at insulated rail joint10.1111/j.1747-1567.2012.00867.x ↗
15. Evaluation of actions on concrete sleepers as design loads–influence of fastenings10.1080/10298430903402161 ↗
16. Giannakos · 2010
17. Greve · 2014
18. Greve · 2015
19. Effect of particle intrusion on rail seat load distributions on heavy haul freight railroads10.1080/23248378.2016.1157048 ↗
20. Examination of the effect of concrete crosstie rail seat deterioration on rail seat load distribution10.3141/2476-01 ↗
21. Measuring rail seat pressure distribution in concrete crossties: experiments with matrix-based tactile surface sensors10.3141/2374-22 ↗
22. Younesian · 2008
23. Manda · 2014
24. R.G. Kernes, J.R. Edwards, M.S. Dersch, D.A. Lange, C.P. Barkan, Investigation of the impact of abrasion as a concrete crosstie rail seat deterioration (RSD) mechanism. in: American Railway Engineering and Maintenance of Way Association (AREMA) Conference Proceedings, 2011.
25. R.G. Kernes, J.R. Edwards, M.S. Dersch, D.A. Lange, C.P. Barkan, Investigation of the dynamic frictional properties of a concrete crosstie rail seat and pad and its effect on rail seat deterioration (RSD), in: Transportation Research Board 91st Annual Meeting, 2011.
26. Investigation of the mechanics of rail seat deterioration and methods to improve the abrasion resistance of concrete sleeper rail seats10.1177/0954409714530911 ↗
27. Wei · 2014
28. Ghosh · 2016
29. M.G. Romero, M. Dersch, J. Edwards, C. Barkan, B. Wilson, and J. Mediavilla, Investigation of Concrete Sleeper Rail Seat Pressure Distributions for Varying Fastening Systems and Loading Conditions, Excellence in Heavy Haul Railroad IHHA 2011, 2011.
30. Dynamic characterization of a ballast layer subject to traffic impact loads using three-dimensional sensing stones and a special sensing sleeper10.1016/j.conbuildmat.2014.06.005 ↗
31. Methods for quantifying rail seat loads and a review of previous experimentation10.1177/0954409715569862 ↗
32. Evaluation of dynamic and impact wheel load factors and their application in design processes10.1177/0954409715619454 ↗
33. Dynamic vehicle-track model to study the effects of track geometry and vehicle-track interaction on concrete tie rail seat load environment10.3141/2545-02 ↗
34. UITP, deliverable d0602. Final consolidated report, Urban Rail Transport, 2010.
35. Slab track: review of existing systems and optimization potentials including very high speed10.1016/j.conbuildmat.2015.03.102 ↗
36. F.R. Administration, Methods for quantifying rail seat loads and review of previous experimentation, U.S. Department of Transportation, vol. 2, chapter 2, 2012.
37. AREMA, American Railway Engineering and Maintenance-of-Way Association, AREMA Manual for Railway Engineering, Landover, Maryland, 2012.
38. Esveld · 2001
39. Kerr · 2003
40. ASTM, American society for testing and materials standard test methods for Rubber Properties in Compression, in D575-91, 2001.
41. Application of an optimal wavelet transformation for rail-fastening system identification in different preloads10.1016/j.measurement.2015.12.039 ↗
42. J.C. Stith, Railroad track pressure measurements at the rail/tie interface using Tekscan sensors, 2005.
43. Das, Sreekanta, Jiaji Liu, Mohamded Gamal El-Sayed, and Gary Sturgeon. Effect of Height-to-Thickness Ratio on Compressive Strength of Hollow Concrete Masonry Prisms. In12th Canadian Masonry Symposium. 2013.10.70803/001c.138228 ↗
44. Investigation of rail irregularity effects on wheel/rail dynamic force in slab track: comparison of two and three dimensional models10.1016/j.jsv.2016.03.033 ↗
45. Safe distance of cultural and historical buildings from subway lines10.1016/j.soildyn.2017.02.008 ↗
46. http://kanetec.com/products/magnetic-base/magnetic-base/.
47. Dynamic forces at square and inclined rail joints: field experiments10.1061/(ASCE)TE.1943-5436.0000866 ↗
48. On the determination of the rail support modulus k10.1016/S0020-7683(99)00151-1 ↗
49. Effects of vibration in desert area caused by moving trains10.1007/BF03325772 ↗
50. Effectiveness of the floating slab track system constructed at Konya Light Rail10.1016/j.measurement.2016.04.003 ↗
51. Effect on vehicle and track interaction of installation faults in the concrete bearing surface of a direct-fixation track10.1016/j.jsv.2011.08.023 ↗
52. Hay · 1982
53. H. Latan, I. Ghozali, Partial least Squares: Concept and application path modeling using program XLSTAT-PLS for empirical research, BP UNDIP, 2012.
54. S. Addinsoft, XLstat 2012: Leading data analysis and statistical solution for microsoft excel, Addinsoft SRL, 2012.
55. H. Askarinjejad, M. Dhanasekar, S. Simson, Effect of vertical misalignment of adjacent sleepers on the increase in dynamic loads around rail joints, CORE 2010: Rail, Rejuvenation and Renaissance, 2010, pp. 163.
56. UIC, International Union of Railways, Design of mono-block concrete sleepers, in: UIC CODE, 2004.
57. Australian Standard. Pre-stressed concrete sleepers, in Railway track materials, 2002.