journal article·2017-10

Bond strength of whitetoppings and bonded overlays constructed with self-compacting high-performance concrete

Rubén-Daniel López-Carreño, Pablo Pujadas, Sergio H.P. Cavalaro, Antonio Aguado

Publisher page

Abstract

A bonded concrete overlay consists of a concrete layer poured over a deteriorated pavement. Its mechanical performance depends on the quality of the bond between the lower and the uppermost layers. This paper reports an extensive experimental program to evaluate bond strength between Conventional Concrete (CC) and Asphalt Concrete (AC) substrates and Self-Compacting High-Performance Concrete (SCHPC) overlays. In all, 8 interface treatments are tested under Direct Tension, pure shear “LCB”, and compressive Slant Shear tests. The results show that direct pouring of the SCHPC overlay over CC and AC substrates produces similar or higher strengths than the other treatments analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. American Concrete Pavement Association, Guide to concrete overlays: sustainable solutions for resurfacing and rehabilitating existing pavements, Third ed., ACPA, Publication TB021.02, 2014.
2. Torres · 2012
3. Thin and ultra thin whitetopping – a synthesis of highway practice NCHRP synthesis
4. Slant shear bond strength between self compacting concrete and old concrete10.1016/j.conbuildmat.2016.11.023 ↗
5. C. Schmidt, M. Schmidt, “Whitetopping” of asphalt and concrete pavements with thin layers of Ultra-High-Performance Concrete: Construction and economic efficiency, in: Proceedings of 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, 2012, pp. 921–927. Kassel (Germany).
6. Friction and cohesion coefficients of composite concrete-to-concrete bond10.1016/j.cemconcomp.2014.10.003 ↗
7. Analysis of in situ bond strength of bonded concrete overlay10.1016/j.conbuildmat.2016.02.062 ↗
8. Effect of surface preparation and bonding agent on the concrete-to-concrete interface strength10.1016/j.conbuildmat.2012.07.028 ↗
9. Concrete-to-concrete bond strength. Influence of the roughness of the substrate surface10.1016/j.conbuildmat.2004.04.023 ↗
10. Comparison of methods for evaluating bond strength between concrete substrate and repair materials10.1016/j.cemconres.2004.05.027 ↗
11. Estimation of bond strength envelopes for old-to-new concrete interfaces based on a cylinder splitting test10.1016/j.conbuildmat.2010.09.032 ↗
12. A study of some factors affecting bond in cementitious fiber reinforced repairs10.1016/j.cemconres.2014.05.008 ↗
13. The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete10.1080/01694243.2012.761543 ↗
14. Bond performance between ultra high-performance concrete and normal-strength concrete10.1061/(ASCE)MT.1943-5533.0000890 ↗
15. High-performance fiber-reinforced concrete: Development and evaluation as a repairing material10.1061/(ASCE)MT.1943-5533.0000980 ↗
16. Interface bonding between hot-mix asphalt and various Portland cement concrete surfaces: laboratory assessment10.3141/2057-06 ↗
17. Mechanical analysis of a mixed mode debonding test for “composite” pavements10.1016/j.conbuildmat.2012.11.027 ↗
18. Mechanical response of fiber reinforced concrete overlays over asphalt concrete substrate: Experimental results and numerical simulation10.1016/j.conbuildmat.2015.05.050 ↗
19. F. Mu, Laboratory and Numerical Investigation of Interface Debonding of Bonded Concrete Overlay of Asphalt and Its Effects on the Critical Stress in the Overlay (Ph.D. dissertation), Swanson School of Engineering, University of Pittsburgh, 2014.
20. Interface between an old concrete and a bonded overlay: debonding mechanism10.1023/B:INTS.0000042336.03156.cb ↗
21. Debonding
22. Chestney · 1996
23. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
24. Parameters affecting the debonding risk of bonded overlays used on reinforced concrete slab subjected to flexural loading10.1617/s11527-008-9410-x ↗
25. Thin ECC overlay systems for rehabilitation of rigid concrete pavements10.1680/macr.12.00022 ↗
26. A four-point bending test for the bonding evaluation of composite pavement10.1007/978-94-007-4566-7_6 ↗
27. R. Miró, F. Pérez, J.M. Borrás, Evaluation of the effect of tack coats. LCB shear test, in: M.N. Partl (Ed.), Proceedings of Sixth International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, 2003, pp. 550–556. Zurich (Switzerland).10.1617/2912143772.069 ↗
28. Assessing heat-adhesive emulsions for tack coats
29. UNE-EN 13108-1:2008, Bituminous mixtures. Material Specifications. Part 1: Asphalt concrete, 2008.
30. UNE-EN 12591:2009. Bitumen and bituminous binders. Specifications for paving grade bitumen, 2009.
31. A. Aguado de Cea, S. Carrascón, S.H. Pialarissi Cavalaro, I. Puig Damians, C. Senés, Manual para el proyecto, construcción y gestión de pavimentos bicapa de hormigón, Instituto Español del Cemento y sus Aplicaciones, 2010 (Only available in Spanish).
32. NLT-161/98, Simple compression strength of asphalt mixtures. NLT Standards, 1998 (Only available in Spanish).
33. NLT-346/90, Indirect tensile strength of bituminous mixes, NLT Standards, 1990 (Only available in Spanish).
34. UNE EN 12390-3:2009. Testing hardened concrete - Part 3: Compressive strength of test specimens, 2009.
35. UNE-EN 12390-13:2014. Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression, 2014.
36. UNE EN 12390-6:2010. Testing hardened concrete - Part 6: Tensile splitting strength of test specimens, 2010.
37. UNE EN 12390-2:2009. Testing hardened concrete - Part 2: Making and curing specimens for strength tests, 2009.
38. UNE-EN 13808:2013. Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions, 2013.
39. Front and side view image correlation measurements on FRP to concrete pull-off bond tests10.1061/(ASCE)CC.1943-5614.0000106 ↗
40. Bi-layer diaphragm walls: Evolution of concrete-to-concrete bond strength at early ages10.1016/j.conbuildmat.2011.12.090 ↗
41. Interface evaluations of overlay-concrete bi-layer composites by a direct shear test method10.1016/j.cemconcomp.2004.02.048 ↗
42. Shear strength of steel fiber-reinforced concrete
43. Factors affecting bond between new and old concrete
44. ASTM C 882-13a. Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear, 2013.
45. NLT-335/00, Measurement of the surface macrotexture of a pavement using the volumetric technique, NLT Standards, 2000 (Only available in Spanish).
46. J.R. Taylor, An introduction to error analysis – the study of uncertainties in physical measurements, second ed., University Science Books, 1997, Sausalito, California, USA, p. 349.
47. Influence of surface roughness on the bond of FRP laminates to concrete10.1016/j.conbuildmat.2012.09.112 ↗