Experimental and numerical study of strengthening of heat-damaged RC beams using NSM CFRP strips
Source abstract
Abstract
Abstract An experimental and numerical study of eight reinforced concrete beams is reported in this paper. In the experiments, two beams were normal temperature controls, and the other six beams were heated under the ISO-834 standard fire curve. All beams had the same geometrical dimensions, reinforcement and loading and support arrangements. The flexural behaviour was studied after exposure to 600 and 700 °C for two hours. Two beams were un-strengthened fire-damaged control beams and the other four beams were strengthened with carbon fibre-reinforced polymer (CFRP) laminates after exposure to heating. The results showed that the mid-span ultimate load, stiffness, and ductility of the heat-damaged beams decreased compared with those of the normal-temperature control beam. Although the ultimate load and stiffness decreased, repair with near-surface mounted (NSM) systems to the CFRP laminate using an epoxy- or cement-based adhesive in grooves cut into the concrete surface was found to increase the load capacity and stiffness of the beams. The finite element models (FEMs) were able to predict the experimental behaviour reasonably well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Fire effects on concrete materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A. Tovey, Assessment and repair of fire-damaged concrete structures-an update, ACI Special Publication, Michigan, 92-1, 1986, 47–62.
2. A. Tovey, R. Crook, Experience of fires in concrete structures, evaluation and repair of the damage to concrete, American Concrete Institute, Michigan, 92-4, 1986, 1–14.
3. Repair of heat-damaged reinforced concrete slabs using fibrous composite materials10.1016/j.conbuildmat.2010.09.033 ↗
4. Fire-damaged RC members repaired with high-performance fibre-reinforced jacket10.1111/j.1475-1305.2010.00731.x ↗
5. R. Allen, S. Edwards, J. Shaw, The repair of concrete structures, 2th ed., 1993, Publication in the Taylor and Francis e-library, 2005. www.eBookstore.tandf.co.uk.10.1007/978-1-4899-7208-8 ↗
6. ACI 224-1R-07, Causes, Evaluation, and Repair of Cracks in Concrete Structures, ACI Committee 224, 2007, Michigan. American Concrete Institute.
7. Evaluation and repair of fire-damaged buildings
8. V. Kodur, D. Baingo, Fire resistance of FRP reinforced concrete slabs, Institute for Research in Construction, Ottawa, Canada, 758, 1998, p. 37.
9. S. Hashemi, R. Al-Mahaidi, An investigation of CFRP application on reinforced concrete members using cement-based adhesives, Technical paper, Department of Civil Engineering, Monash University, 11(2), 2011, pp. 129–139.10.1080/13287982.2010.11465061 ↗
10. A. Al-Abdwais, R. Al-Mahaidi, Modified cement-based adhesive for Near-Surface Mounted FRP strengthening system, Fourth Asia-Pacific Conference on FRP in Structures, International Institute for FRP in Construction, Melbourne, Australia, 2013, Paper no. 119.
11. A. Jadooe, R. Al-Mahaidi, K. Abdouka, Performance of fire-damaged concrete members strengthened with NSM laminates embedded in epoxy adhesive, in: Proceedings, 27th Biennial National Conference of the Concrete Institute of Australia in conjunction with the 69th Rilem Week, Melbourne, Australia, 2015, pp. 193–202.
12. Strengthening bridge slabs with grouted reinforcement
13. D.M. Nguyen, T.K. Chan, H.K. Cheong, Brittle failure and bond development length of CFRP-concrete beams, J. Compos. Constr., 10.1061/(ASCE)1090-0268(2001), 5(1), 12–17.10.1061/(ASCE)1090-0268(2001)5:1(12) ↗
14. A. Pantuso, U. Neubauer, F.S. Rostasy, Effects of thermal mismatch between FRP and concrete on bond, In: Minutes of 4th Concrete Fibre Crete meeting, Lille, France, 2000, pp. 20–21.
15. Durability characteristics of concrete columns wrapped with FRP tow sheets10.1061/(ASCE)0899-1561(1998)10:1(52) ↗
16. X. Yan, B. Miller, A. Nanni, C.E. Bakis, Characterization of CFRP rods used as near surface mounted reinforcement, in: Proc. 8th Intl. Structural Faults and Repair Conference M.C. Forde, Ed., Engineering Technics Press, Edinburgh, Scotland, 1999, pp. 1–10.
17. Bond between near surface mounted FRP rods and concrete in structural strengthening
18. Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: protection systems with insulation of the anchorage zones10.1016/j.compositesb.2011.09.002 ↗
19. Experimental study of bond of NSM-FRP reinforcement10.1016/j.conbuildmat.2006.05.054 ↗
20. A new technique for retrofitting damaged concrete structures10.1680/stbu.2002.152.4.309 ↗
21. Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates10.1016/j.compositesb.2005.12.003 ↗
22. Nonlinear finite element analysis of reinforced concrete beams strengthened by fibre-reinforced plastics10.1016/S0263-8223(03)00174-0 ↗
23. Finite element modeling of reinforced concrete beams strengthened with FRP laminates
24. D. Kachlakev, T. Miller, S. Yim, K. Chansawat, T. Potisuk, Finite element modeling of concrete structures strengthened with FRP laminates, Final Report, SPR 316, Oregon Department of Transportation, USA, 2001.
25. Finite element modelling of concrete cover separation failure in FRP plated RC beams10.1016/S0950-0618(02)00090-9 ↗
26. V. Cervenka, I. Jendele, J. Cervenka, ATENA Program Documentation Part 1, ATENA Theory Manual, Prague, Czech Republic, Cervenka Consulting, 2012a.
27. V. Cervenka, I. Jendele, J. Cervenka, J. ATENA Program Documentation, Part 8, ATENA-GiD Interface Manual, Prague, Czech Republic, Cervenka Consulting, 2012b.
28. ISO 834, Fire resistance tests-elements of building construction: International Organization for Standardization, Geneva, Switzerland, 2012.
29. ASTM C39-14a, Standard test method for compressive strength of cylindrical concrete specimens, American Society for Testing and Materials International, West Conshohocken, United States, 2014.
30. ASTM C496-11, Standard test method for splitting tensile strength of cylindrical concrete specimens, American Society for Testing and Materials International, West Conshohocken, United States, 2011.
31. ASTM C469, Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. American Society for Testing and Materials International, West Conshohocken, United States, 2002.
32. ASTM A615/A615M-16, Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, American Society for Testing and Materials International, West Conshohocken, PA, 2016, www.astm.org.
33. ASTM A370-16, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, American Society for Testing and Materials International, West Conshohocken, PA, 2016, www.astm.org.
34. ASTM D3039-14, Standard test method for tensile properties of polymer matrix composite materials, American Society for Testing and Materials International, West Conshohocken, United States, 2014.
35. ASTM C109-13, Standard test method for compressive strength of hydraulic cement mortars, American Society for Testing and Materials International, West Conshohocken, United States, 2013.
36. ASTM C496-11, Standard test method for splitting tensile strength of cylindrical concrete specimens, American Society for Testing and Materials International, West Conshohocken, United States, 2011.
37. ACI 440.2R-08, Guide for the design and construction of externally bonded FRP systems for retrofitting concrete structures, ACI American Concrete Institute, Farmington Hills, Michigan, USA, 2008.
38. Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips10.1061/(ASCE)1090-0268(2003)7:3(248) ↗
39. Al-Abdwais · 2014
40. effects of temperature levels and concrete cover thickness on residual strength characteristics of fire exposed reinforced concrete beams10.4314/njt.v34i3.1 ↗
41. Repair of heat-damaged RC shallow beams using advanced composites10.1617/s11527-007-9238-9 ↗
42. Bazant · 1996
43. Strengthening of RC members with near-surface mounted CFRP rods10.1016/j.compstruct.2009.04.040 ↗
44. Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars10.1016/j.compstruct.2013.10.051 ↗
45. Experimental and numerical study of the behaviour of heat-damaged RC circular columns confined with CFRP fabric10.1016/j.compstruct.2015.07.116 ↗
46. Modelling of NSM CFRP strips embedded in concrete after exposure to elevated temperature using epoxy adhesive10.1016/j.conbuildmat.2017.05.027 ↗
47. Bond behaviour between NSM CFRP strips and concrete after exposure to elevated temperature using cement-based and epoxy adhesives10.1061/(ASCE)CC.1943-5614.0000812 ↗
48. Eurocode 4. Design of composite steel and concrete structure; part 1-2: general rules-structural fire design, British Standards Institution, Brussels, Belgium, 2005.
49. AS 3600. Concrete structures Sydney, NSW, and Australia: Standards Australia, 2009.