The effect of temperature variation on chloride penetration in concrete
Source abstract
Abstract
Abstract Under a service condition, there are simultaneous temperature variation, moisture fluctuation, and chloride migration in concrete. The coupling effects among them are important for evaluating long-term performance of reinforced concrete structures. In this paper, the effect of temperature gradient on chloride penetration in concrete was experimentally studied. A new experimental technique was established. A systematic experimental study was conducted using the new testing method and concrete specimens with different water-cement ratios, subjected to different temperature gradients and chloride concentrations on the boundary. The test data showed that the temperature variation can significantly increase the chloride penetration process when the gradient of temperature and the gradient of chloride are in the same direction. Gradients in the same direction means that the heat transfer and the chloride penetration are in the same direction. For example, on the right surface of a concrete wall, the temperature is higher than that on the left surface of the wall. Similarly, the chloride concentration on the right surface of the wall is higher than that on the left surface. As a result, both heat transfer and chloride penetration occur from the right to the left. A theoretical model was developed to characterize the coupled chloride penetration and temperature gradient. An additional term was included in the Fick’s law to take into account the effect of temperature gradient. The proportional factor in front of the temperature gradient is defined as the coupling parameter, D Cl-T , which represents the effect of the temperature gradient on chloride penetration. An analysis method was developed to calculate the coupling parameter D Cl-T based on the experimental results. D Cl-T is not a constant but increases with chloride concentration as well as temperature difference in the concrete and decreases with increasing age of concrete. A material model was developed for D Cl-T using the test data obtained in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. An Experimental Study on the Effect of Chloride Penetration on Moisture Diffusion in Concrete10.1007/BF02480359 ↗
2. L. Abarr, The Effect of Moisture Diffusion on Chloride Penetration, M.S. Thesis of the University of Colorado at Boulder, 2005.
3. L. Abarr, A. Ababneh, Y. Xi, An experimental study on the effect of moisture diffusion on chloride penetration in concrete, submitted to Magazine of Concrete Research, 2016.
4. Calculation of chloride diffusion coefficient in concrete from ionic migration measurements10.1016/0008-8846(93)90023-3 ↗
5. Analytical solutions of ionic diffusion and heat conduction in multi-layered porous media10.1155/2015/208914 ↗
6. Transportation of ions through cement based materials, part i: fundamental equations and basic measurement techniques10.1016/0008-8846(94)90010-8 ↗
7. Coupled diffusion of multi-component chemicals in non-saturated concrete10.12989/cac.2013.11.3.201 ↗
8. Analysis of chloride diffusion into partially saturated concrete
9. Chloride ingress in partially saturated and fully saturated concretes
10. A prediction method for long-term chloride concentration profiles in hardened cement matrix materials
11. Modeling chloride penetration in saturated concrete10.1061/(ASCE)0899-1561(1999)11:1(58) ↗
12. Multiscale modeling of interactive diffusion process in concrete