journal article·2017-12

Field-aged asphalt binder performance evaluation for Evotherm warm mix asphalt: Comparisons with hot mix asphalt

Shenghua Wu, Weiguang Zhang, Shihui Shen, Xiaojun Li, Balasingam Muhunthan, Louay N. Mohammad

Publisher page

Abstract

Abstract Evotherm is one of the chemical warm mix asphalt (WMA) technologies that has been widely used in sustainable asphalt pavement construction. But the long-term performance of such warm mix asphalt pavement has not been studied comprehensively. This study investigated the field-aged asphalt binder performance with three different Evotherm additives (ET, DAT and 3G) based on fourteen field projects across the United States. Their performance was compared with corresponding HMA control binder. Asphalt binders were extracted and recovered, and were subjected to tests including continuous grading high temperature and low temperature, multiple stress creep recovery, and fracture. The results showed that after 2–6 years of field aging, the HMA binder had relative higher continuous grading high temperature than the Evotherm binder. All HMA and Evotherm binders regardless of types were m-value controlled, indicating of a significant aging level. The thermal cracking resistance of both HMA and Evotherm binders were similar and quite poor. The failure strain value of HMA binder is comparable with that of Evotherm binder at 20 °C as well as at 5 °C. The addition of Evotherm additive did not compromise the elastic response of polymer-modified binders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. J. D’Angelo, E. Harm, J. Bartoszek, G. Baumgardner, M. Corrigan, J. Cowsert, T. Harman, M. Jamshidi, W. Jones, D. Newcomb, B. Prowell, R. Sines, B. Yeaton, Warm-mix asphalt: European practice, Report No. FHWA-PL-08-007, 2008.
2. NCHRP Report 843, Performance of WMA Technologies: Stage II – Long-Term Field Performance, National Research Council, Washington D.C., 2017.
3. J.K. Davidson, C. Lubbers, K. Takamura, Characterization of Unmodified and SBR Latex-Modified Evotherm Warm Mix Binder, Canadian Technical Asphalt Association, 2007. .
4. K. Takamura, Characterization of emulsion based warm mix binder, Road Materials and Pavement Design, vol. 9, Issue 1, special issue on asphalt technology, 2008. http://dx.doi.org/10.1080/14680629.2008.9690160.10.1080/14680629.2008.9690160 ↗
5. J.W. Button, C. Estakhri, A. Wimsatt, A synthesis of warm-mix asphalt, Report No. FHWA/TX-07/0-5597-1, Texas Transportation Institue, College Station, TX, 2007.
6. R. Bonaquist, Mix design practice for warm mix asphalt. NCHRP Report 691, National Research Council, Washington D.C., 2011.10.17226/14488 ↗
7. Determining mixing and compaction temperatures of Evotherm warm mix asphalt using 100% reclaimed asphalt pavement
8. Laboratory evaluation of warm mix asphalt incorporating high RAP proportion by using Evotherm and sylvaroad additives10.1016/j.conbuildmat.2016.03.200 ↗
9. Evaluation of potential processes for use in warm mix asphalt
10. An overview of the emerging warm mix asphalt technology10.1080/10298436.2013.839791 ↗
11. Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime10.1061/(ASCE)MT.1943-5533.0000308 ↗
12. Low-temperature fracture characteristics of selected warm-mix asphalt concretes10.3141/2208-06 ↗
13. Using overlay test to evaluate fracture properties of field-aged asphalt concrete10.1016/j.conbuildmat.2015.10.159 ↗
14. Flow number test and assessment of AASHTO TP 79–13 rutting criteria: comparison of rutting performance of hot-mix and warm-mix asphalt mixture10.3141/2507-11 ↗
15. Laboratory performance of warm mix asphalt binder containing polyphosphoric acid10.1016/j.conbuildmat.2015.12.126 ↗
16. Fatigue evaluation of warm-mix asphalt mixtures: use of uniaxial, cyclic, direct tension compression test10.3141/2208-04 ↗
17. Effects of lime content on moisture susceptibility of rubberized stone matrix asphalt mixtures using warm mix additives in terms of statistical analysis10.1061/(ASCE)MT.1943-5533.0000525 ↗
18. Pavement engineering materials: review on the use of warm-mix asphalt10.1016/j.conbuildmat.2012.06.038 ↗
19. Low-volume road WMA mixtures: moisture susceptibility of mixtures containing coal ash and roofing shingle with moist aggregate10.1061/(ASCE)MT.1943-5533.0000358 ↗
20. Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement through mechanical performance tests and an acoustic emission approach10.1061/(ASCE)MT.1943-5533.0000757 ↗
21. Performance evaluation of field-produced warm-mix asphalt mixtures in Manitoba, Canada10.3141/2294-07 ↗
22. Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt10.3141/2208-13 ↗
23. The effectiveness of warm mix asphalt (WMA) additives affected by the type of aggregate and binder
24. Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures10.3141/2209-07 ↗
25. Emergency paving using hot-mixed asphalt incorporating warm mix technology10.1080/10298436.2012.721549 ↗
26. Improved resistance of long-term aged warm-mix asphalt to moisture damage containing moist aggregates10.1061/(ASCE)MT.1943-5533.0000567 ↗
27. Haul time effects on unmodified, foamed, and additive-modified binders used in hot-mix asphalt10.3141/2347-10 ↗
28. Rheological and chemical characteristics of warm mix asphalt binders at intermediate and low performance temperatures10.1139/cjce-2012-0363 ↗
29. A long-term ultraviolet aging effect on rheology of WMA binders
30. Performance of warm mix asphalt containing Sasboit: state-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
31. Modification mechanism of asphalt modified with Sasobit and polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.03.043 ↗
32. Modifying laboratory mixture design to improve field compaction10.1080/14680629.2015.1077003 ↗
33. American Association of State Highways and Transportation Officials AASHTO T319 (2015) Standard method of test for quantitative extraction and recovery of asphalt binder from asphalt mixtures, AASHTO Designation: T319-15.
34. American Association of State Highways and Transportation Officials AASHTO R59 (2011) Standard practice for recovery of asphalt binder from solution by abson method, AASHTO Designation: T319-11.
35. American Association of State Highways and Transportation Officials AASHTO T315-12 (2012) Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR), AASHTO Designation: T319-12.
36. ASTM International, Standard practice for determining the continuous grading temperatures and continuous grades for PG graded asphalt binders, ASTM D7643-16, West Conshohocken, PA, 2016.
37. American Association of State Highways and Transportation Officials AASHTO R28-12 (2012) Standard Practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV), AASHTO Designation: R28-12.
38. American Association of State Highways and Transportation Officials AASHTO T313-12 (2012) Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), AASHTO Designation: T313-12.
39. Evaluation of the relationship between asphalt binder properties and non-load related cracking
40. American Association of State Highways and Transportation Officials AASHTO T350-14 (2014) Standard method of test for multiple stress creep recover (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR), AASHTO Designation: T350-14.
41. L. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test
42. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance10.1016/j.conbuildmat.2015.06.044 ↗
43. Long-term field rutting and moisture susceptibility performance of warm-mix asphalt pavement10.3141/2575-11 ↗
44. Performance Evaluation of hot mix asphalt containing recycled asphalt shingles in Washington state
45. Evaluate thermal cracking resistance of asphalt binder using 4-mm dynamic shear rheometer monotonic test10.1080/10916466.2016.1271812 ↗
46. American Association of State Highways and Transportation Officials AASHTO M332-14 (2014) Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test, AASHTO Designation: M332-14.
47. High-temperature properties of asphalt binders: comparison of multiple stress creep recovery and performance grading systems10.3141/2574-15 ↗