journal article·2017-12Open access

Cementing efficiency of electric arc furnace dust in mortars

Margareth da Silva Magalhães, Flora Faleschini, Carlo Pellegrino, Katya Brunelli

Abstract

Abstract The aim of this study is to evaluate the cementing efficiency (k-value) of an electric arc furnace dust (EAFD), used in as-received conditions, as a supplementary cementing material (SCM). The investigated variables are the amount of EAFD in the mix, water/binder ratio and curing age. Fifteen mixtures are manufactured to estimate the k-values, both considering compressive and flexural strength. In both cases, k-values depend on replacement percentage, and decrease raising the EAFD content in the mix. Water/binder ratio and hydration time significantly influence EAFD efficiency, too. Additionally, results show that flexural k-values are greater than compressive k-values in the analyzed mortars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. ASTM C595 / C595M – 16 · 2016
2. EN 197-1. Cement Part 1: Composition, Specifications and Conformity Criteria for Common Cements, Brussels, Belgium (2011).
3. Neville · 2011
4. Effects of the axial force eccentricity on the time-variant structural reliability of aging r.c. cross-sections subjected to chloride-induced corrosion10.1016/j.engstruct.2016.10.053 ↗
5. Chemical, physical, structural and morphological characterization of the electric arc furnace dust10.1016/j.jhazmat.2006.01.044 ↗
6. Study of the presence of fluorine in the recycled fractions during carbothermal treatment of EAF dust10.1016/S0956-053X(02)00151-4 ↗
7. Leaching and cementation of heavy metals from electric arc furnace dust in alkaline medium10.1016/j.hydromet.2005.03.002 ↗
8. Steel foundry electric arc furnace dust management: stabilization by using lime and Portland cement10.1016/j.jhazmat.2007.09.066 ↗
9. Effect of arc furnace dust on the properties of OPC and blended cement concretes10.1016/j.conbuildmat.2010.06.024 ↗
10. Recycling of an electric arc furnace flue dust to obtain high grade ZnO10.1016/j.jhazmat.2006.06.079 ↗
11. Investigation of potential uses of electric-arc furnace dust (EAFD) in concrete10.1016/S0008-8846(96)00204-9 ↗
12. Immobilization of EAFD heavy metals using acidic materials
13. Experimental study of the mechanical stabilization of electric arc furnace dust using fluid cement mortars10.1016/j.jhazmat.2016.11.051 ↗
14. Stabilization of electric arc furnace dust in concrete10.1590/S1516-14392010000400014 ↗
15. Stabilization of electric arc furnace dust by the use of cementitious materials: ionic competition and long-term leachability10.1016/j.cemconres.2006.05.012 ↗
16. Evaluation of environmental compatibility of EAFD using different leaching standards10.1016/j.jhazmat.2008.11.125 ↗
17. Leaching of valuable metals from electric arc furnace dust—Tetrabromobisphenol A pyrolysis residues10.1016/j.jaap.2017.04.019 ↗
18. Ultrasound effects on zinc recovery from EAF dust by sulfuric acid leaching10.1007/s12613-015-1080-4 ↗
19. Application of electric arc furnace dust in cement production
20. Utilization of electric arc furnace dust as raw material for the production of ceramic and concrete building products10.1080/10934520600779240 ↗
21. Structural ceramics containing electric arc furnace dust10.1016/j.jhazmat.2013.08.028 ↗
22. Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture10.1016/j.resconrec.2012.10.003 ↗
23. Geopolymerization of coal fly ash in the presence of electric arc furnace dust10.1016/j.mineng.2013.04.007 ↗
24. Study of electric-arc furnace dust (EAFD) in fly ash and rice husk ash-based geopolymers10.1016/j.apt.2017.05.007 ↗
25. M. Niubó, A.I. Fernández, J.M. Chimenos, L. Haurie, A possible recycling method for high grade steels EAFD in polymer composites. J. Hazard. Mater. 171 (1–3) 1139–1144.10.1016/j.jhazmat.2009.06.126 ↗
26. Effects of electric arc furnace dust (EAFD) addition on setting and strength evolutions of cement pastes and mortars10.1080/19648189.2017.1357776 ↗
27. Performance of optimized electric arc furnace dust-based cementitious matrix compared to conventional supplementary cementitious materials10.1016/j.conbuildmat.2016.02.068 ↗
28. Effect of electric arc furnace dust on susceptibility of steel to corrosion in chloride-contaminated concrete10.1016/j.conbuildmat.2012.05.008 ↗
29. Immobilisation of heavy metal in cement-based solidification/stabilisation: a review10.1016/j.wasman.2008.01.019 ↗
30. Influence de la composition d'un ciment Portland sur son hydratation em presence de zinc10.1016/0008-8846(90)90096-G ↗
31. Effect of large additions of Cd, Pb, Cr, Zn, to cement raw meal on the composition and the properties of the clinker and the cement10.1016/S0008-8846(96)85025-3 ↗
32. Properties of Portland cement pastes incorporating nanometer-sized franklinite particles obtained from electric arc furnace dust10.1111/j.1151-2916.2001.tb01114.x ↗
33. Characterisation of products of tricalcium silicate hydration in the presence of heavy metals10.1016/j.jhazmat.2007.01.136 ↗
34. Investigations on the use of electric arc furnace dust (EAFD) in pozzolan-modified Portland cement I (MP) pastes10.1016/j.cemconres.2006.06.003 ↗
35. Generalization of Abrams’ law for cement mortars10.1016/S0008-8846(00)00473-7 ↗
36. Ground granulated blast furnace slag efficiency coefficient (k value) in concrete10.3989/mc.2011.60410 ↗
37. Siddique · 2011
38. Greek supplementary cementing materials and their incorporation in concrete10.1016/j.cemconcomp.2004.02.011 ↗
39. Efficiency of fly ash in concrete10.1016/0958-9465(93)90025-5 ↗
40. Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress10.1016/S0008-8846(99)00249-5 ↗
41. Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance10.1016/j.cemconres.2004.05.051 ↗
42. Investigation of slag cement quality through the analysis of its efficiency coefficient10.1080/19648189.2011.9723351 ↗
43. Performance of BFS concrete: k-value concept versus equivalent performance concept10.1016/j.conbuildmat.2013.05.006 ↗
44. A study on the applicability of the efficiency factor of supplementary cementitious materials to durability properties10.1016/j.conbuildmat.2016.05.031 ↗
45. Durability and cementing efficiency of fly ash in concretes10.1016/j.conbuildmat.2011.12.026 ↗
46. European Committee for Standardization, European Standard EN 206: Concrete-specification, performance, production and conformity. Brussels (2013).
47. Design of fly ash concretes
48. Supplementary cementing materials in concrete10.1016/S0008-8846(02)00827-X ↗
49. P. Schiessl, R. Hardtl, Efficiency of fly ash in concrete evaluation of ibac test results 1991, Technical Report of Institut fiir Bauforschung, RWTH, Aachen.
50. Cement equivalence factors for fly ash10.1016/0008-8846(93)90162-3 ↗
51. Efficiency of pozzolans in cement composites
52. Efficiency of silica fume in concrete10.1016/0008-8846(95)00120-2 ↗
53. Efficiency of GGBS in concrete10.1016/S0008-8846(00)00271-4 ↗
54. A strength definition for the water to cementitious materials ratio
55. EN 1015-11 · 2007
56. Modified water/cement ratio law for compressive strength of fly ash concretes10.1007/BF02472668 ↗