Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash
Source abstract
Abstract
Abstract In this paper, the factors influencing the properties of aerated geopolymer concrete using low calcium fly ash through sodium-based alkali activation at a range of curing temperature is discussed. The parameters and their influence are statistically studied using design of experiments. The initial rate of reaction in the aeration process is controlled by using the alkaline solution (viz., sodium hydroxide (NaOH) and sodium silicate (Na-Si)) which is cooled to a lower temperature. The conditioning of solution at lower temperature helped in achieving uniform mixing and to increase the placing time without hindering aeration. The factors influencing and their interaction effects on fresh density, dry density, compressive strength and water absorption were studied. Compressive strength of aerated geopolymer paste is 55% higher than mortar for the given range of parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. In situ generation of hydrogen from water by aluminum corrosion in solutions of sodium aluminate10.1016/j.jpowsour.2008.11.009 ↗
2. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
3. ASTM C618-12a, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use, ASTM, 2010, pp. 3–6. Doi: 10.1520/C0618.10.1520/C0618 ↗
4. Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
5. Inorganic foams made from alkali-activated fly ash: mechanical, chemical and physical properties10.1016/j.jeurceramsoc.2014.08.024 ↗
6. A comparison between different foaming methods for the synthesis of light weight geopolymers10.1016/j.ceramint.2014.05.108 ↗
7. Fly ash-based geopolymer lightweight concrete using foaming agent10.3390/ijms13067186 ↗
8. Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates10.1016/j.conbuildmat.2009.12.024 ↗
9. Properties of alkali-activated fly ash: high performance to lightweight10.1080/19397038.2010.487162 ↗
10. Light weight geopolymer paste made with Sidoarjo Mud (Lusi)10.4028/www.scientific.net/MSF.803.63 ↗
11. Mix design, properties and cost analysis of fly ash-based geopolymer foam10.1016/j.conbuildmat.2015.01.063 ↗
12. IS 4031-part 6 · 2005
13. SAS Release 8.02, SAS Institute Inc, Cary, NC, USA, 1999.
14. Effect of elevated temperatures on geopolymer paste, mortar and concrete10.1016/j.cemconres.2009.10.017 ↗
15. Workability and strength of coarse high calcium fly ash geopolymer10.1016/j.cemconcomp.2006.11.002 ↗