Impact of recycled asphalt materials on asphalt binder properties and rutting and cracking performance of plant-produced mixtures
Source abstract
Abstract
Abstract The use of recycled asphalt materials (RAM), such as Reclaimed Asphalt Pavement (RAP) and Reclaimed Asphalt Shingles (RAS), offers a great benefit in improving the rutting resistance of Hot Mix Asphalt (HMA) due to the changes in the rheological properties of the aged asphalt binder. To improve the HMA crack resistance, soft asphalt binders are typically blended with RAP and/or RAS to modify their rheological properties. However, soft asphalt binders could compromise the HMA rutting resistance, particularly in areas with high pavement temperatures and heavy traffic. Texas has implemented HMA mixtures with addition of RAM in many projects, and several premature field-rutting failures were observed with these mixtures. The addition of stiff aged asphalt binders of RAP and RAS can also decrease the HMA cracking resistance potential. Different from other previous studies, this study used plant-produced mixtures collected from various highway construction sites and projects to investigate the effects of RAM on the asphalt binder properties as well as the rutting and cracking performances of these plant-produced asphalt mixtures that represent actual in-service field applications. Through this study, designers, engineers, and the industry are able to gain a clearer understanding of pavement performance of mixtures with RAM. As theoretically expected, the corresponding results indicated that addition of RAP and RAS significantly improved the Dynamic Shear Rheometer (DSR) high temperature grade of all the extracted asphalt binders, with most of the HMA mixtures exhibiting relatively low J nr values in the multiple stress creep recovery (MSCR) test. For the HMA rutting performance tests, all the mixtures passed the Hamburg Wheel Tracking Test (HWTT) while some exhibited relatively high permanent deformation in the Repeated Load Permanent Deformation (RLPD) test. By comparison, the MSCR (J nr )-RLPD correlation was found to be more definitive than the DSR-RLPD correlation. In general, the mixtures with RAP and RAS exhibited comparatively low cracking resistance in the Overlay Tester (OT).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Tran · 2012
2. Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures10.1016/j.conbuildmat.2008.05.002 ↗
3. Kennedy · 1998
4. Soohyok · 2014
5. Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and bioasphalt10.1061/(ASCE)MT.1943-5533.0000295 ↗
6. Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation10.1016/j.conbuildmat.2013.03.013 ↗
7. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – a laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
8. Mechanistic modeling to evaluate structural performance of bituminous pavements with inelastic deformation and fatigue damage of mixturs
9. Study on marshall and rutting test of SMA at abnormally high temperature10.1016/j.conbuildmat.2013.06.032 ↗
10. Texas Department of Transportation, Condition of Texas Pavements-Pavement Management Information System Annual Report| FY 2011-2014, 2014.
11. National Center For Asphalt Technology, Effect of Rejuvenator on HMA Mixtures with High RAP and RAS Contents, Research Synopsis 12-05.
12. Al-Qadi · 2007
13. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance ─ a laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
14. The relationship of the MSCR test to Rutting10.1080/14680629.2009.9690236 ↗
15. Characterization of asphalt binder resistance to permanent deformation based on nonlinear viscoelastic analysis of multiple stress creep recovery (MSCR) test
16. Relating asphalt binder elastic recovery properties to HMA Cracking and fracture properties10.1016/j.conbuildmat.2016.05.157 ↗
17. Relating asphalt binder elastic recovery properties to HMA crack modeling and fatigue life prediction10.1016/j.conbuildmat.2016.02.175 ↗
18. Tex-210-F Determining Asphalt Content of Bituminous Mixtures by Extraction: Part I-Centrifuge Extraction Method Using Chlorinated Solvent.
19. ASTM D5404 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator.
20. AASHTO M320 · 2013
21. AASHTO TP70-10 · 2013
22. ASTM D4402 · 2015
23. F. Zhou, T. Scullion, Input Parameters of Enhanced VESYS5. Report No. FHWA/TX-05/9-1502-01-4.(2014) http://d2dtl5nnlpfr0r.cloudfront.net/tti.tamu.edu/documents/9-1502-01-4.pdf.
24. Tex-242-F (2014). TxDOT-Texas Department of Transportation Designation. Hamburg Wheel Tracking Test. Austin, Texas. http://ftp.dot.state.tx.us/pub/txdot-info/cst/TMS/200-F_series/pdfs/bit242.pdf. Accessed on Janurary 2016.
25. Texas Department of Transportation. Online Manuals: The Overlay Test – Test Designation Tex-248-F. Austin, TX, USA. Accessed July 2015.
26. Improved methodology to evaluate fracture properties of warm mix asphalt using overlay test10.3141/2506-02 ↗
27. The hamburg Rutting test- effects of HMA sample sitting time and test temperature10.1016/j.conbuildmat.2016.01.031 ↗