Flexural fatigue evaluation of cement-treated mixtures of reclaimed asphalt pavement and crushed aggregates
Source abstract
Abstract
Abstract This paper evaluates the fatigue behavior of cement-treated recycled pavement materials. Six mixtures with different cement contents and reclaimed asphalt pavement (RAP) percentages were tested under static and cyclic flexural loading. Cement content was the main factor affecting strength, whereas RAP percentage showed major effect in strain at break. Similar moduli were obtained under both loading conditions, which is useful for design by allowing estimating resilient modulus through static results. Tests results and mechanistic analysis showed that the fatigue life of cement-treated recycled bases depends on the mixture composition and on the thicknesses of asphalt wearing courses and recycled layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Portland Cement Association, Guide to Full Depth Reclamation (FDR) with Cement, Illinois, 2005.
2. Strength and deformation characteristics of cement-treated reclaimed pavement with a chip seal10.3141/2212-11 ↗
3. The impact of cement contents on the properties of asphalt emulsion stabilized cold recycling mixtures
4. Factors affecting strength of road base stabilized with cement slurry or dry cement in conjunction with full-depth reclamation10.3141/2310-12 ↗
5. Fatigue assessment of cement-treated base for roads: an examination of beam-fatigue tests10.1061/(ASCE)MT.1943-5533.0001601 ↗
6. Mechanical properties of cement-treated mixtures of milled bituminous concrete and crushed aggregates10.1007/BF02485991 ↗
7. The influence of the type of loading and temperature on the modulus of elasticity of cement-bound mixes of milled bituminous concrete and crushed aggregates10.1007/BF02485954 ↗
8. Influence of reclaimed asphalt content on the mechanical behaviour of cement-treated mixtures10.1080/14680629.2013.794367 ↗
9. Evaluation of cement treated mixtures with high percentage of reclaimed asphalt pavement10.1016/j.conbuildmat.2013.06.042 ↗
10. Comparison of full depth reclamation with Portland cement and full depth reclamation with no stabilizer in an accelerated loading test10.3141/2524-13 ↗
11. Strength, shrinkage, erodibility and capillary flow characteristics of cement-treated recycled pavement materials10.1016/j.ijprt.2017.06.001 ↗
12. Recycling techniques and environmental issues relating to the widening of a high traffic volume Italian motorway
13. A study on the mechanical behaviour of cement–bitumen treated materials10.1016/j.conbuildmat.2010.07.007 ↗
14. Full-depth reclamation for rehabilitation of local roads: a case study10.1080/10298436.2012.657196 ↗
15. Wirtgen, Wirtgen cold recycling technology, Windhagen, 2012.
16. Japan Concrete Institute · 1984
17. National Cooperative Highway Research Program, Characterization of Cementitiously Stabilized Layers for Use in Pavement Design and Analysis. Report 789, 2014, 34–38.
18. Austroads · 2008
19. Flexural beam fatigue strength evaluation of crushed brick as a supplementary material in cement stabilized recycled concrete aggregates10.1016/j.conbuildmat.2014.07.007 ↗
20. Austroads · 2012
21. Laboratory fatigue life of cemented materials in Australia10.1080/14680629.2013.779300 ↗