Colour, compressive strength and workability of mortars with an iron rich sewage sludge ash
Source abstract
Abstract
Abstract This paper reports a study of the colour, compressive strength and workability of mortar when cement is partly replaced by sewage sludge ash (SSA). In the study, an iron rich SSA was dry milled into six different fractions. The results showed that the colour, compressive strength and workability parallel to one another gradually changed when the particle sizes of the SSA decreased. The milling of the SSA altered the performance of mortars to the extent that the compressive strength and workability were comparable to the performance of ordinary mortar. At the same time, the colour also changed from grey to a reddish colour. As the change in colour may be of importance for application, it is suggested to include colour as experimental parameter in future work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Cement production technology improvement compared to factor 4 objectives10.1016/j.cemconres.2009.09.031 ↗
2. The cement industry as a scavenger in industrial ecology and the management of hazardous substances10.1162/jiec.2007.997 ↗
3. Concrete: microstructure, properties, and materials
4. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
5. Recycling and recovery routes for incinerated sewage sludge ash (ISSA): a review10.1016/j.wasman.2013.05.024 ↗
6. Sewage sludge ash characteristics and potential for use in concrete10.1016/j.conbuildmat.2015.08.122 ↗
7. Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials10.1016/j.cemconres.2007.04.003 ↗
8. Use of sewage sludge ash(SSA)-cement admixtures in mortars10.1016/0008-8846(96)00119-6 ↗
9. Mechanical behavior of mortars containing sewage sludge ash (SSA) and Portland cements with different tricalcium aluminate content10.1016/S0008-8846(98)00177-X ↗
10. Use of sewage sludge ash as fine aggregate and pozzolan in portland cement mortar
11. Effect of milling and acid washing on the pozzolanic activity of incinerator sewage sludge ash10.1016/j.cemconcomp.2009.09.002 ↗
12. Influence of the fineness of sewage sludge ash on the mortar properties10.1016/S0008-8846(03)00165-0 ↗
13. Biocrete, Technical final report: Utilisation of Ash from Incineration of Wastewater sludge (Bio ash) in Concrete production [Internet]. Hvidovre, 2008.(accessed 30.11.16), Available from: http://www.biocrete.dk/.
14. I.B. Jensen, Production of bio ash concrete -task 8 [Internet]. Hvidovre; 2008, Available from: http://www.biocrete.dk/english/20186.
15. The reuse of bio ash for the production of concrete. A Danish case study
16. Biofos, Rammeaftale for afhentning af slamaske til genanvendelse, Available at: http://www.biofos.dk/wp-content/uploads/2016/01/Bilag-4-Kravspecifikation-04032016.pdf 2016, Accessed September 20, 2017.
17. DS/EN 12620 + A1:2008/: Aggregates for concrete. (2008).
18. DS 2426, Concrete – Materials – Rules for application of EN 206-1 in Denmark (2011).
19. DS/EN 259:2003, Determination of metals in water, sludge and atomic absorption. 2003..
20. Preliminary assessment of electrokinetic remediation of soil and sludge contaminated with mixed waste10.1080/10473289.1999.10463849 ↗
21. DS/EN 196-3 +A1 Methods of testing cement - Part 3: Determination of setting time, 2009.
22. DS/EN 1015-3 Determination of consistence of fresh mortar(by flow table), 1999.
23. Mechanical and physical properties of cement blended with sewage sludge ash10.1016/j.wasman.2008.02.019 ↗
24. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
25. The colour potentials of SSA-containing mortar