journal article·2018-01

Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material

Valerio C. Andrés-Valeri, Javier Rodriguez-Torres, Miguel A. Calzada-Perez, Jorge Rodriguez-Hernandez

Publisher page

Abstract

The use of cellulose fibers (CF) has become a common technique for reducing draindown problems in porous asphalt (PA) mixtures, helping to increase the bitumen content and providing thicker binder films. In this research, a laboratory study was conducted to assess the suitability of using recycled Tetra Brick Aseptic (TBA) containers as an environmentally friendly substitute for virgin cellulose fibers used in PA pavements. The results obtained showed that recycled TBA material was a suitable addition for PA mixtures, providing similar, or sometimes greater, improvements than commercial CF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A.E. Alvarez, A.E. Martin, C.K. Estakhri, J.W. Button, C.J. Glover, S.H. Jung, Synthesis of current practice on the design, construction, and maintenance of porous friction courses, Report number: FHWA/TX-06/0-5262-1, Texas Department of Transportation Research and Technology Implementation Austin, TX, USA, 2006.
2. Internal structure of compacted permeable friction course mixtures10.1016/j.conbuildmat.2009.11.015 ↗
3. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
4. Laboratory investigation of open-graded friction-course mixtures containing polymers and cellulose fibers10.1061/(ASCE)TE.1943-5436.0000304 ↗
5. EAPA (European Asphalt Pavement Association), Sustainable roads – Long-Life asphalt pavements – version for bankers’ EAPA Ed. Brussels, Belgium, 2007.
6. Laboratory evaluation of warm-mix open graded friction course mixtures10.1061/(ASCE)MT.1943-5533.0000611 ↗
7. Effect of organic fibers on open-graded friction course mixture properties10.1080/10298430500087936 ↗
8. Effect of fiber types on relevant properties of porous asphalt10.1016/S1003-6326(06)60302-6 ↗
9. Cooley · 2000
10. Effect of binder types on engineering properties and performance of porous asphalt concrete10.3141/2293-07 ↗
11. Evaluation of permeable friction course mixtures with various binders and additives10.1061/(ASCE)MT.1943-5533.0000631 ↗
12. Laboratory evaluation of stabilizing methods for porous asphalt mixtures10.1016/j.conbuildmat.2013.08.076 ↗
13. Pyrolysis of the tetra pak10.1016/j.wasman.2009.07.008 ↗
14. PG-3: Technical Recommendations for Roads and Bridges [In Spanish]. Spanish Ministry of Public Works: Madrid, Spain, 2007.
15. W.R. Vavrick, G. Huber, W.J. Pine, R. Bailey. Method summarized for gradation selection in hot-mix asphalt design. Transportation Research Circular E-C044, 2002.
16. EN 1097-3, Tests for mechanical and physical properties of aggregates, Determination of loose bulk density and voids, CEN (European Committee for Standardization), 1998.
17. EN 1426, Bitumen and bituminous binders. Determination of needle penetration, CEN (European Committee for Standardization), 2007.
18. EN 1427, Bitumen and bituminous binders, Determination of the softening point. Ring and Ball method, CEN (European Committee for Standardization), 2007.
19. EN 12591, Bitumen and bituminous binders, Specifications for paving grade bitumens, CEN (European Committee for Standardization), 2009.
20. EN 12593, Bitumen and bituminous binders, Determination of the Fraass breaking point, CEN (European Committee for Standardization), 2007.
21. EN 12697-17, Bituminous mixtures. Test methods for hot mix asphalt, Particle loss of porous asphalt specimen, CEN (European Committee for Standardization), 2007.
22. EN 12697-8, Bituminous mixtures. Test methods for hot mix asphalt, Determination of void characteristics of bituminous specimens, CEN (European Committee for Standardization), 2003.
23. EN 12697-30, Bituminous mixtures, Test methods for hot mix asphalt, Specimen preparation by impact compactor, CEN (European Committee for Standardization), 2012.
24. EN 12697-6, Bituminous mixtures, Test methods for hot mix asphalt, Determination of bulk density of bituminous specimens, CEN (European Committee for Standardization), 2012.
25. ASTM D7063–05: Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples · 2005
26. EN 12697-18, Bituminous mixtures, Test methods for hot mix asphalt. Binder drainage, CEN (European Committee for Standardization), 2006.
27. NLT 362/92, Water effect on the cohesion of bituminous mixtures with open gradations, through the Cantabro abrasion test (In Spanish), Centro de Estudios y Experimentación de Obras Públicas, Spain, 1992.
28. EN 12697-23, Bituminous mixtures, Test methods for hot mix asphalt, Determination of the indirect tensile strength of bituminous specimens, CEN (European Committee for Standardization), 2004.
29. EN 12697-12, Bituminous mixtures, Test methods for hot mix asphalt, Determination of the water sensitivity of bituminous specimens, CEN (European Committee for Standardization), 2009.
30. ASTM D7064-04, Standard practice for open-graded friction course (OGFC) mix design, ASTM International, 2006.
31. Improved durability of recycled porous asphalt10.1016/j.conbuildmat.2013.07.044 ↗
32. Use of reclaimed asphalt in porous asphalt mixtures: laboratory and field evaluations10.1061/(ASCE)MT.1943-5533.0001182 ↗
33. Laboratory study to evaluate the influence of reclaimed asphalt content on performance of recycled porous asphalt10.1520/JTE20140024 ↗