journal article·2018-01Open access

Study of concrete damage mechanism under hydrostatic pressure by numerical simulations

Jian Cui, Hong Hao, Yanchao Shi

Abstract

Abstract Current material models commonly assume concrete does not suffer damage under hydrostatic pressure. However concrete damages were observed in recent true tri-axial tests. Hydrostatic pressures varying from 30 MPa to 500 MPa were applied on the 50 mm cubic concrete specimens in the tests. Uniaxial compressive tests and microscopic observations on the hydrostatic tested specimens indicated that concrete suffered obvious damage if the applied hydrostatic pressure was higher than the uniaxial compressive strength of concrete specimen. This study aims to examine damage mechanism of concrete under hydrostatic pressures through numerical simulations. A mesoscale concrete model with the consideration of randomly distributed aggregates and pores is developed and verified against the testing data, and then used to simulate the responses of concrete specimens subjected to different levels of hydrostatic pressures. The simulation results show that under hydrostatic pressure there are significant deviatoric stresses distributed inside the specimen especially in the zones around the pores and between aggregates and mortar because of the inhomogeneous and anisotropic characteristics of the concrete material. The mortar paste matrix in these zones is seriously damaged leading to concrete damage associated with significant stiffness and strength losses. More accurate concrete material models need be developed to take into consideration the damages that could be induced by hydrostatic stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Structural Response to Dynamic Loads · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The equation of state of unsaturated cementitious composites – a new multiscale model10.1016/j.ijsolstr.2017.01.002 ↗
2. Experimental detection of damage evolution in concrete under multiaxial compression
3. High-strength concrete subjected to triaxial compression
4. Complete triaxial stress-strain curves of high-strength concrete10.1061/(ASCE)0899-1561(2001)13:3(209) ↗
5. Experimental investigation of the behavior of variably confined concrete10.1016/S0008-8846(02)01086-4 ↗
6. Experimental analysis of concrete behavior under high confinement: effect of the saturation ratio10.1016/j.ijsolstr.2008.10.015 ↗
7. A plasticity concrete material model for DYNA3D10.1016/S0734-743X(97)00023-7 ↗
8. W. Riedel, K. Thoma, S. Hiermaier, E. Schmolinske, Penetration of reinforced concrete by BETA-B-500 numerical analysis using a new macroscopic concrete model for hydrocodes, in: Proceedings of the 9th International Symposium on the Effects of Munitions with Structures, sn (1999).
9. LS-DYNA version ls971 R7.0.0, Livermore Software Technology Corporation, Livermore, CA.
10. Discussion on the suitability of concrete constitutive models for high-rate response predictions of RC structures10.1016/j.ijimpeng.2017.04.003 ↗
11. Damage of concrete in a very high stress state: experimental investigation10.1617/s11527-008-9467-6 ↗
12. Maximum usable strain of FRP-confined concrete10.1016/j.conbuildmat.2015.03.017 ↗
13. Uniaxial confined compression tests of cementitious materials10.1016/j.conbuildmat.2017.07.010 ↗
14. Numerical simulation of the mechanical behaviour of epoxy based mortars under compressive loads10.1016/S0045-7949(02)00251-1 ↗
15. Monte Carlo simulations of meso-scale dynamic compressive behavior of concrete based on X-ray computed tomography images10.1016/j.ijimpeng.2016.06.009 ↗
16. Modeling the effect of mesoscale randomness on concrete fracture10.1016/j.probengmech.2005.11.002 ↗
17. Mesoscopic study of concrete I: generation of random aggregate structure and finite element mesh10.1016/S0045-7949(98)00177-1 ↗
18. Mesoscale modelling of concrete tensile failure mechanism at high strain rates10.1016/j.compstruc.2008.04.013 ↗
19. Mesoscale modeling of concrete: Geometry and numerics10.1016/j.compstruc.2005.10.003 ↗
20. Meso-scale computational modeling of the plastic-damage response of cementitious composites10.1016/j.cemconres.2010.12.002 ↗
21. Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores10.1016/j.conbuildmat.2014.09.069 ↗
22. Mesoscale models for concrete: homogenisation and damage behaviour10.1016/j.finel.2005.11.008 ↗
23. 3D meso-scale modelling of concrete material in spall tests10.1617/s11527-014-0281-z ↗
24. Experiments and mesoscopic modelling of dynamic testing of concrete10.1016/j.mechmat.2011.05.002 ↗
25. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
26. Active and non-active porosity in concrete part I: experimental evidence10.1007/BF02482109 ↗
27. Experimental study of concrete damage under high hydrostatic pressure10.1016/j.cemconres.2017.06.005 ↗
28. Experimental study of slabbing and rockburst induced by true-triaxial unloading and local dynamic disturbance10.1007/s00603-016-0990-4 ↗
29. True triaxial strength and failure modes of cubic rock specimens with unloading the minor principal stress10.1007/s00603-014-0701-y ↗
30. Aggregate-cement paste interface: Part I Influence of aggregate geochemistry10.1016/S0008-8846(99)00086-1 ↗
31. Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete10.1016/j.cemconres.2013.05.004 ↗
32. W.F. Chen, Plasticity in Reinforced Concrete, J. Ross Publishing, 2007.
33. Porosity, pore size distribution and in situ strength of concrete10.1016/S0008-8846(02)00942-0 ↗
34. Air-void characterisation of foam concrete10.1016/j.cemconres.2006.10.009 ↗
35. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
36. A review of the work of the RILEM TC 159-ETC: engineering of the interfacial transition zone in cementitious composites10.1007/BF02484160 ↗
37. Influence of the micro-and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates10.1016/j.cemconres.2011.11.015 ↗
38. Numerical analysis of lateral inertial confinement effects on impact test of concrete compressive material properties10.1260/2041-4196.1.1.145 ↗