Enhancement of low-cement self-compacting concrete with dolomite powder
Source abstract
Abstract
Abstract This study aims at exploring the benefits of using dolomite powder (DP) to improve the engineering performance of low-cement self-compacting concrete (SCC) with cementitious materials comprised of 50 wt% of ordinary Portland cement (OPC) and 50 wt% pozzolanic materials of ground granulated blast furnace slag (GGBFS/slag) and low calcium fly ash (FA). Experimental results showed that the DP addition to partially substitute for the pozzolanic materials had no impact on the setting properties of pastes with blended binder of slag and OPC while significantly improved those of the pastes with that of FA and OPC or ternary mixture of slag, FA, and OPC binder. In addition, the adjustment of DP addition to the above-mentioned three binders had successfully manufactured the self-compacting mortars (SCMs) with significant increase in the flowing ability and compressive strength, in which the DP addition of 30 wt% substituting for the total amount of pozzolanic materials resulted in the hardened mortars with highest compressive strengths after ages of 7 days. The improvement of compressive strengths of hardened SCMs can be obtained by the DP addition up to 50 wt%. The SCCs produced from the appropriate proportions of the resulting DP modified SCMs had the engineering properties mostly satisfying the technical requirements for practical concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Self-consolidating concrete in Virginia department of transportation’s bridge structures
2. Self-compacting concrete: theoretical and experimental study10.1016/j.cemconres.2005.06.002 ↗
3. Self-compacting concrete10.3151/jact.1.5 ↗
4. The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars10.1016/j.cemconcomp.2005.12.003 ↗
5. The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars10.1016/j.cemconres.2006.04.002 ↗
6. A new method for the mix design of medium strength flowing concrete with low cement content10.1016/S0958-9465(02)00013-6 ↗
7. A simple mix design method for self-compacting concrete10.1016/S0008-8846(01)00566-X ↗
8. European Federation of Producers and Contractors of Specialist Products for Structures (EFNARC) · 2005
9. Self-compacting concrete: an analysis of 11 years of case studies10.1016/j.cemconcomp.2005.10.003 ↗
10. Mortar as a model to predict self-compacting concrete rheological properties as a function of time and temperature10.1016/j.conbuildmat.2016.08.136 ↗
11. Carbonation resistance and microstructural analysis of low and high volume fly ash self compacting concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2016.10.067 ↗
12. Self-compacting concrete incorporating high volumes of class F fly ash: preliminary results10.1016/S0008-8846(00)00504-4 ↗
13. Evaluation of strength at early ages of self-compacting concrete with high volume fly ash10.1016/j.conbuildmat.2007.04.005 ↗
14. Simplified mixture design for production of self- consolidating concrete
15. Development of cost-effective self-consolidating concrete incorporating fly ash, slag cement, or viscosity-modifying admixtures
16. Design of self-compacting concrete with ground granulated blast furnace slag10.1016/j.matdes.2012.06.049 ↗
17. Utilization of high volume of industrial slag in self compacting concrete10.1016/j.jclepro.2015.08.039 ↗
18. Properties of HPC with recycled aggregates10.1016/j.cemconres.2005.11.022 ↗
19. Novel ternary blends of Type 1 Portland cement, residual rice husk ash, and limestone powder to improve the properties of self-compacting concrete10.1016/j.conbuildmat.2016.09.002 ↗
20. Properties of self-compacting mortar made with various types of sand10.1016/j.cemconcomp.2012.07.007 ↗
21. The use of quarry dust for SCC applications10.1016/S0008-8846(01)00726-8 ↗
22. Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case)10.1016/j.resconrec.2006.12.004 ↗
23. Use of different limestone and chalk powders in self-compacting concrete10.1016/j.cemconres.2004.07.001 ↗
24. Behavior of self-compacting concrete made with marble and tile wastes exposed to external sulfate attack10.1016/j.conbuildmat.2016.12.193 ↗
25. Incorporation of fillers from marble and tile wastes in the composition of self-compacting concretes10.1016/j.conbuildmat.2015.04.052 ↗
26. Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method10.1016/j.jclepro.2016.12.156 ↗
27. Effects of fly ash and dolomite powder on the properties of self-compacting concrete10.1016/j.conbuildmat.2011.03.018 ↗
28. Effect of dolomite limestone powder on the compressive strength of concrete10.1016/j.proeng.2013.04.098 ↗
29. ASTM C150 · 2017
30. ASTM C1618 · 2015
31. ASTM C305 · 2014
32. Effects of red mud on properties of self-compacting mortar10.1016/j.jclepro.2016.07.052 ↗
33. ASTM C109 · 2016
34. ASTM C1621 · 2014
35. ASTM C39 · 2016
36. ASTM C215 · 2014
37. ASTM C597 · 2016
38. The filler effect: the influence of filler content and surface area on cementitious reaction rates10.1111/jace.12264 ↗
39. Correlation between bulk and surface resistivity of concrete10.1007/s40069-014-0094-z ↗
40. FM5-578 · 2004