journal article·2018-03Open access

Identification of damage mechanisms in cement paste based on acoustic emission

Rafal Anay, Vafa Soltangharaei, Lateef Assi, Timothy DeVol, Paul Ziehl

Abstract

Abstract Acoustic emission (AE) monitoring during compressive loading was employed to investigate micro-crack formation and coalescence in cement paste specimens. To establish a correlation between damage and AE activity, the data was categorized on the basis of amplitude and cumulative signal strength (CSS). Three distinct stages of crack behavior, illuminated by changes in the slope of the cumulative signal strength versus time relationship, were identified. Micro-crack initiation, crack extension, and unstable crack growth (crack coalescence) were assigned to these stages. An unsupervised pattern recognition approach was employed to separate the data into signal subsets which were then classified and assigned to differing mechanisms. To gain further insight into the crack growth network and behavior, specimens were loaded to varying levels of ultimate capacity and micro-CT scanning was employed to investigate the dimensional extent of micro-cracking and to correlate the images with AE data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Micromechanical multiscale fracture model for compressive strength of blended cement pastes10.1016/j.cemconres.2015.12.003 ↗
2. Fracture mechanism in cement-based materials subjected to compression10.1061/(ASCE)0733-9399(1998)124:1(94) ↗
3. ASTM, ASTM -10b: Standard Terminology for non destructive examinations, (2013).
4. M. Pour-ghaz, R. Spragg, J. Castro, J. Weiss, Can acoustic emission be used to detect alkali silica reaction earlier than length change?, in: 14th Int. Conf. Alkali-Aggregate React. (2012) 1–10.
5. P. Olaszek, G. Swit, J.R. Casas Rius, Proof load testing supported by acoustic emission: an example of application, in: Bridge Maintenance, Safety, Management and Life-Cycle Optimization: Proceedings of the Fifth International IABMAS Conference, Philadelphia, USA, 11–15 July 2010.10.1201/b10430-65 ↗
6. Acoustic emission monitoring for assessment of prestressed concrete beams10.1016/j.conbuildmat.2014.01.100 ↗
7. On-site acoustic-emission monitoring for assessment of a prestressed concrete double-tee-beam bridge without plans10.1061/(ASCE)CF.1943-5509.0000810 ↗
8. Study on the AE characteristics of fracture process of mortar, concrete and steel-fiber-reinforced concrete beams10.1016/S0008-8846(00)00358-6 ↗
9. Microcracking and fracture process in cement mortar and concrete: a comparative study using acoustic emission technique10.1007/s11340-012-9708-z ↗
10. Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio10.1016/j.cemconres.2007.02.008 ↗
11. Assessment of localized damage in concrete under compression using acoustic emission10.1061/(ASCE)0899-1561(2006)18:3(325) ↗
12. Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique10.1016/j.conbuildmat.2013.03.041 ↗
13. Use of cluster analysis of acoustic emission signals in evaluating damage severity in concrete structures
14. Use of acoustic emission data clustering to identify damage mode in concrete structures
15. Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features10.1016/j.conbuildmat.2014.05.015 ↗
16. An unsupervised pattern recognition approach for AE data originating from fatigue tests on polymer-composite materials10.1016/j.ymssp.2015.04.011 ↗
17. Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites10.1016/j.compstruct.2014.05.023 ↗
18. Cluster analysis of acoustic emission signals for 2D and 3D woven carbon fiber/epoxy composites10.1177/0021998315597742 ↗
19. Damage classification in carbon fibre composites using acoustic emission: a comparison of three techniques10.1016/j.compositesb.2014.08.046 ↗
20. Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission10.1016/j.compositesa.2016.07.002 ↗
21. Pattern recognition techniques for acoustic emission based condition assessment of unfired pressure vessels
22. Rahman · 2014
23. Investigation of the changes in microstructure and transport properties of leached cement pastes accounting for mix composition10.1016/j.cemconres.2015.09.017 ↗
24. Unsupervised and supervised pattern recognition of acoustic emission signals during early hydration of Portland cement paste
25. ASTM International, ASTM C305: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars, Am. Soc. Test. Mater. (2011) 13–15. doi: 10.1520/C0305-11.2.
26. AEwin software version e4.30, Mistras Group Inc. (2004). http://www.physicalacoustics.com/by-product/aewin/.
27. Localization of microcracking in concrete under uniaxial tension
28. The influence of microcracking on the mechanical behavior of cement based materials10.1016/1065-7355(95)90020-9 ↗
29. Application of the ae improved b-value to quantitative evaluation of fracture process in concrete-materials
30. Moment tensor analysis of acoustic emission for cracking mechanisms in concrete
31. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
32. A generalized theory of acoustic emission and green’s functions in a half space
33. Classification of cracking mode in concrete by acoustic emission parameters10.1016/j.mechrescom.2011.03.007 ↗
34. Effect of wave distortion on acoustic emission characterization of cementitious materials10.1016/j.conbuildmat.2012.03.013 ↗
35. Identification of cracking mechanisms in scaled FRP reinforced concrete beams using acoustic emission10.1007/s11340-012-9692-3 ↗
36. BURKER, SkyScan 1176 In vivo X-Ray Microtomography Instruction Manual, 2011. http://www.bruker.com/.
37. Technique to measure 3D work-of-fracture of concrete in compression
38. The influence of shrinkage-cracking on the drying behaviour of White Portland cement using Single-Point Imaging (SPI)10.1016/S0926-2040(98)00080-0 ↗
39. Single-point imaging of partially dried, hydrated white Portland cement10.1006/jmra.1995.0019 ↗
40. Magnetic resonance imaging of crack formation in hydrated cement paste materials10.1016/j.cemconres.2004.01.023 ↗
41. MRI: A complementary tool for imaging cement pastes10.1016/j.cemconres.2006.07.003 ↗
42. Mistras Group Hellas ABEE, NOISIS, Advanced Acoustic Emission Data Analysis Pattern Recognition and Neural Networks Software for Acoustic Emission Applications, 11th Edition, 2012. http://www.mistrasgroup.gr/.