Assessment and restoration of bond strength of heat-damaged reinforced concrete elements
Source abstract
Abstract
Abstract This investigation focuses on the assessment of the residual (after cooling) bond strength between concrete and steel rebars of reinforced concrete elements after exposure to elevated temperature and how to restore the bond strength using different repairing techniques and materials. The bond test was carried out on twenty-four beam end test specimens. The test parameters considered in the current research are the exposure condition, concrete compressive strength, rebar type, rebar size, rebar location, repairing techniques, and repairing materials. The test results indicated a significant reduction in the residual bond strength for heat-damaged specimens with a dramatic change in the bond stress-slip behavior. The deep repair technique is more efficient than the shallow repair technique in restoring a large portion of the original bond strength for heat-damaged specimens. Among the different repair materials used in the current research, the commercially fiber reinforced mortar is the most efficient one. Based on the limited number of specimens considered in this study, simple relationships are proposed to predict the bond strength and characterize the bond stress – slip behavior. The proposed relationships yield good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Retained properties of concrete exposed to high temperatures: Size effect10.1002/fam.996 ↗
2. Constitutive relationships for self-compacting concrete at elevated temperatures10.1617/s11527-013-0187-1 ↗
3. Constitutive relationships for steel fibre reinforced concrete at elevated temperatures10.1007/s10694-012-0322-5 ↗
4. Mechanical properties of normal and high strength concretes subjected to high temperatures and using image analysis to detect bond deteriorations10.1016/j.conbuildmat.2010.01.020 ↗
5. The effect of cement dosage on mechanical properties of concrete exposed to high temperatures10.1016/j.firesaf.2012.10.016 ↗
6. Modifications of material properties due to elevated temperatures
7. Fire performance of sustainable recycled concrete aggregates: mechanical properties at elevated temperatures and current research needs10.1007/s10694-015-0504-z ↗
8. Effects of elevated temperatures on residual properties of concrete reinforced with waste polypropylene carpet fibres
9. Effect of high temperature or fire on heavy weight concrete properties10.1016/j.cemconres.2004.05.023 ↗
10. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
11. Residual strength for concrete after exposure to high
12. Impact of high temperature on PFA concrete10.1016/S0008-8846(01)00513-0 ↗
13. Repairability of fire damaged structures: CIB W14 report
14. Some mechanical properties of glass reinforced concrete at elevated temperatures
15. Effect of different parameters on concrete-bar bond under high temperature
16. Bond strength at high temperatures10.1680/macr.1981.33.115.75 ↗
17. Residual bond strength between steel bars and concrete after elevated temperatures10.1016/j.firesaf.2009.04.001 ↗
18. The influence of high temperature on the bond in reinforced concrete10.1016/0379-7112(79)90024-9 ↗
19. How fire affects steel-to-concrete bond
20. Further responses of the bond in reinforced concrete to high temperatures10.1680/macr.1983.35.124.157 ↗
21. Acoustic emission and bond degradation in reinforced concrete due to elevated temperatures
22. Bond characteristics of reinforced normal-strength concrete beams at elevated temperatures10.14359/51687098 ↗
23. Experimental research on bond strength between rebar and concrete after high temperature10.4028/www.scientific.net/AMM.71-78.1057 ↗
24. Predicting the bond between concrete and reinforcing steel at elevated temperatures10.12989/sem.2013.48.5.643 ↗
25. Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steel10.1016/j.conbuildmat.2004.03.006 ↗
26. Modelling the bond between concrete and reinforcing steel in a fire10.1016/j.engstruct.2010.08.010 ↗
27. Analysis of bond-slip between concrete and steel bar in fire10.1016/j.compstruc.2015.09.011 ↗
28. Numerical modeling of reinforcement pull-out and cover splitting in fire-exposed beam-end specimens10.1016/j.engstruct.2015.12.017 ↗
29. Beam test on bond behavior between high-grade rebar and high-strength concrete after elevated temperatures10.1016/j.firesaf.2014.07.001 ↗
30. Bond after fire10.1016/j.conbuildmat.2016.11.131 ↗
31. Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete10.1016/j.firesaf.2007.11.002 ↗
32. Experimental analysis of the loss of bond between rebars and concrete exposed to high temperatures
33. Structural repair of fire damaged concrete
34. Repair of heat-damaged reinforced concrete T-beams using FRC jackets10.1680/macr.2007.59.3.223 ↗
35. Repair of heat-damaged RC shallow beams using advanced composites10.1617/s11527-007-9238-9 ↗
36. Repair of heat-damaged reinforced concrete slabs using fibrous composite materials10.1016/j.conbuildmat.2010.09.033 ↗
37. Repair of fire-damaged reinforced concrete columns
38. Repair of fire damaged circular reinforced concrete columns with FRP composites10.1016/j.conbuildmat.2010.06.017 ↗
39. ASTM-A944 · 2005 · 1
40. BS-EN197-1 · 2000 · 1
41. ASTM-E119 · 2000 · 1
42. Design criteria for early-age bond strength in reinforced concrete10.1007/BF02472635 ↗
43. CEB-FIP · 1993 · 1
44. Bond behavior of reinforcement in conventional and self-compacting concrete10.1260/1369-4332.15.12.2033 ↗
45. Analytical and experimental investigation for bond behaviour of newly developed polystyrene foam particles’ lightweight concrete10.1016/j.engstruct.2013.10.015 ↗
46. C. Orangun, J. Jirsa, J. Breen, The strength of anchored bars: a Re-evaluation of test data on development length and splices. Research Report (154-3F), 1975.
47. Bond between normal strength and high-strength concrete (HSC) and reinforcing bars in splices in beams
48. ACI-408R · 2003 · 1
49. R. Eligehausen, E. Popov, V. Bertero, Local Bond Stress-slip Relationships of Deformed Bars Under Generalized Excitations, 1983.
50. Bond stress-slip model for steel bars in unconfined or steel, FRC, or FRP confined concrete under cyclic loading10.1061/(ASCE)0733-9445(2009)135:5(509) ↗
51. Local bond stres sslip behaviour of reinforcing bars em1bedded in plain and fibre concrete
52. Z. Huang, B. Engström, J. Magnusson, Experimental Investigation of the Bond and Anchorage Behaviour of Deformed Bars in High Strength Concrete, Chalmers Univ. Technol. Div. Concr. Struct. Report 94, 1996, pp. 1–32.