Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads
Source abstract
Abstract
Abstract The flexural properties of basalt textile reinforced concrete (BTRC) specimens with pre-tension, short carbon, steel, and AR-glass fibers were investigated through three-point bending in a utilizing drop-weight impact setup. The flexural impact parameters, such as flexural strength, flexural modulus, ultimate strain, maximum strain, and energy absorption capacity, were determined under different impact velocities. The flexural strength and toughness of the BTRC specimens without pre-tension significantly increased when the impact velocity (1.0–3.0 m/s) and layers of basalt textiles were increased. By contrast, the flexural modulus initially increased and subsequently decreased with increasing impact velocity, whereas the loading rate exerted a marginal influence on the ultimate strain and the maximum strain. When the basalt textile had four reinforcement layers, the BTRC reinforced with 0.5 vol% of short carbon fiber or short steel fiber exhibited varied different flexural responses under different impact velocities (1.0–4.0 m/s); in particular, the BTRC reinforced with short steel fibers had a higher maximum strain. In addition, pre-tensioned BTRC with different short fibers were tested under an impact velocity of 1.0 m/s. The flexural strength decreased as the short carbon fiber and glass fiber contents increased. The highest flexural strength was observed in the pretensioned specimen with 0.5 vol% of short glass fiber and three layers of basalt textile. The addition of short fibers in cement matrix, the number of textile layer used as reinforcement, the pretension on textile, and the impact velocities used in the tests can significantly affect the flexural impact behavior of BTRC specimens. The Weibull parameters were analyzed to quantify the degree of variability in the flexural strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Innovations in Concrete and Construction Materials · Wound Healing and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Bond characteristics of carbon, alkali resistant glass, and aramid textiles in mortar10.1061/(ASCE)0899-1561(2004)16:4(356) ↗
2. Bonding characteristics of multifilament polymer yarns and cement matrices10.1016/j.compositesa.2008.03.012 ↗
3. Influence of thermal treatment on tensile failure of basalt fibers10.1016/S0013-7944(01)00119-9 ↗
4. Stability of basalt fibers in a medium of hydrating cement10.1023/A:1014930930475 ↗
5. Use of basalt fibers for concrete structures10.1016/j.conbuildmat.2015.07.138 ↗
6. Fire structural resistance of basalt fibre composite10.1016/j.compositesa.2015.01.006 ↗
7. Enhanced bonding of low modulus polymer fibers-cement matrix by means of crimped geometry10.1016/S0008-8846(97)00088-4 ↗
8. Effect of short, dispersed glass and carbon fibres on the behaviour of textile-reinforced concrete under tensile loading10.1016/j.engfracmech.2012.06.001 ↗
9. Improved mechanical properties of textile reinforced concrete thin plate10.1007/s11595-013-0647-z ↗
10. Influence of short dispersed and short integral glass fibres on the mechanical behaviour of textile-reinforced concrete10.1617/s11527-012-9913-3 ↗
11. Experimental study on basalt textile reinforced concrete under uniaxial tensile loading10.1016/j.conbuildmat.2017.01.083 ↗
12. Strain rate effect on the tensile behaviour of textile-reinforced concrete under static and dynamic loading10.1016/j.msea.2010.11.014 ↗
13. Tension stiffening in textile-reinforced concrete under high speed tensile loads10.1016/j.cemconcomp.2015.07.009 ↗
14. Experimental research on mechanical performance of hybrid fiber reinforced cementitious composites with polyvinyl alcohol short fiber and carbon textile10.1177/0021998310371529 ↗
15. Mechanical properties of FRCM using carbon fabrics with different coating treatments10.1016/j.compositesb.2015.11.012 ↗
16. Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement-based composites10.1016/j.cemconres.2016.03.008 ↗
17. Concrete Prestressed with Textile Fabric10.3151/jact.1.231 ↗
18. Pre-tensioning of fabrics in cement-based composites10.1016/j.cemconres.2007.02.010 ↗
19. Distributed cracking mechanisms in textile-reinforced concrete under high speed tensile tests10.1617/s11527-015-0685-4 ↗
20. Dynamic tensile testing of fabric–cement composites10.1016/j.conbuildmat.2010.06.014 ↗
21. Distributed cracking and stiffness degradation in fabric-cement composites10.1007/s11527-005-9005-8 ↗
22. Size effects on impact response of composite laminates10.1016/S0734-743X(98)00036-0 ↗
23. Behavior of concrete beams strengthened with fiber-reinforced polymer laminates under impact loading10.1061/(ASCE)1090-0268(2003)7:3(209) ↗
24. Impact response of ultra-high-strength fiber-reinforced cement composite
25. Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials10.1016/0958-9465(95)00003-8 ↗
26. Impact resistance of fiber reinforced concrete at subnorma temperatures10.1016/S0958-9465(98)00015-8 ↗
27. Polymer and steel fiber-reinforced cementitious composites under impact loading-Part 1: bond-slip response
28. Polymer and steel fiber-reinforced cementitious composites under impact loading-Part 2: flexural toughness
29. Impact response of steel fiber-reinforced concrete using a Split Hopkinson pressure bar10.1061/(ASCE)0899-1561(2004)16:1(54) ↗
30. Fibre reinforced concrete beams under impact loading10.1016/S0008-8846(96)85024-1 ↗
31. Dynamic properties of polypropylene fiber-reinforced concrete slabs10.1016/S0958-9465(97)00030-9 ↗
32. Static and dynamic behavior of extruded sheets with short fibers10.1061/(ASCE)0899-1561(2001)13:4(248) ↗
33. Low velocity flexural impact behavior of AR glass fabric reinforced cement composites10.1016/j.cemconcomp.2009.04.011 ↗
34. Impact behavior of sisal fiber cement composites under flexural load
35. Mechanical characterization of steel fiber reinforced self-compacting refractory concrete
36. Basalt Fiber Reinforced Polymer Composites
37. Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence10.1016/j.cemconcomp.2011.11.019 ↗
38. NetAnswer. Report rep036: Textile Reinforced Concrete - State-of-the-Art Report of RILEM TC 201-TRC, Materials & Structures.
39. A. C. Standard Test Method for Flexural Performance of Fiber Reinforced Concrete (using Beam with Third-point Loading), ASTM C1609/C1609M-05, West Conshohocken Pennsylvania, 2006.
40. Strain rates for three-and four-point flexure tests10.1007/BF00610652 ↗
41. F. Silva, K. Ghavami, J. d’Almeida. Strain Rate Behavior of Fiber-Reinforced Cement Composite Materials, Fifth International Symposium on Natural Polymers and Composites—ISNAPOL, 2004, pp. 205–207.
42. Impact behavior of sisal fiber cement composites under flexural load
43. Flexural impact response of textile-reinforced aerated concrete sandwich panels10.1016/j.matdes.2015.07.004 ↗
44. Influence of bond properties on the tensile behaviour of Textile Reinforced Concrete10.1016/j.cemconcomp.2008.08.004 ↗
45. A general strength distribution function for brittle materials10.1016/0955-2219(92)90021-5 ↗
46. M. Gencoglu, B. Mobasher. Static and Impact Behavior of Fabric-Reinforced Cement Composites in Flexure, High-Performance Fiber-Reinforced Cement Composites (HPFRCC5) (2007) 463–470.
47. Strengthening concrete elements by confinement within textile reinforced concrete (TRC) shells–Static and impact properties10.1016/j.conbuildmat.2013.03.031 ↗
48. Mechanical properties of hybrid cement-based composites