journal article·2018-08

Optimizing rejuvenator content in asphalt concrete to enhance its durability

Arturo F. Espinoza-Luque, Imad L. Al-Qadi, Hasan Ozer

Publisher page

Abstract

Abstract The use of rejuvenators in asphalt concrete (AC) have been receiving greater attention recently due to their effect on improving the performance of AC mixes to control the impact of the increasing use of recycled asphalt. This study evaluates the effectiveness of a rejuvenator to reduce AC’s cracking susceptibility utilizing the Illinois Flexibility Index Test (I-FIT). The AC’s rutting potential was assessed using the Hamburg Wheel Track Test. Samples were prepared on unaged and short-term aged conditions to identify the effect of service time on AC mixes. This study found that increasing rejuvenator content on AC mixes may reduce cracking susceptibility, but possibly increase rutting. Both 2-D and 3-D balanced mix design interaction plots show that designing a durable AC mix with recycled material can be achieved by controlling rejuvenator content with and without aging. Contractors and agencies alike may use interaction plots to develop AC mixes with optimal balanced performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Life-cycle greenhouse gases and energy consumption for material and construction phases of pavement with traffic delay10.3141/2428-04 ↗
2. ARA, Guide for Mechanistic Empirical Design of New and Rehabilitated Pavement Structures, NCHRP Report No. 1-37A. Washington, DC, 2004.
3. Effect of coarse aggregate shape on engineering properties of stone mastic asphalt applied to airport pavements
4. Performance evaluation of hot mix asphalt containing recycled asphalt shingles in Washington state
5. Performance of hot mix asphalt concrete produced with coarse recycled concrete aggregate10.1061/(ASCE)MT.1943-5533.0001284 ↗
6. Primary causes of cracking of asphalt pavement in North Carolina: field study10.1080/10298436.2014.943220 ↗
7. D.W. Christensen, R.F. Bonaquist, Volumetric Requirements for Superpave Mix Design, NCHRP Report No. 567. Washington, DC, 2006.
8. Evaluation of the relationship between asphalt binder properties and non-load related cracking
9. Fracture resistance characterization of superpave mixtures using the semi-circular bending test10.1520/JAI12264 ↗
10. Evaluation of low temperature properties of rubberized asphalt mixtures10.1016/j.proeng.2017.02.098 ↗
11. N. Tran, A. Taylor, R. Willis, Effect of Rejuvenator on Performance Properties of HMA Mixtures with High RAP and RAS Contents, NCAT Report 12-05. Auburn, AL, 2012.
12. I.L. Al-Qadi, M. Elseifi, S.H. Carpenter, Reclaimed asphalt pavement – A literature review, Report No. FHWA-ICT-07-001. Illinois Center for Transportation, Rantoul, IL, 2007. http://hdl.handle.net/2142/46007.
13. Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP10.1016/j.conbuildmat.2016.07.029 ↗
14. Early-age performance characterization of hot-mix asphalt overlay with varying amounts of asphalt binder replacement10.1016/j.conbuildmat.2017.07.114 ↗
15. 100% recycled hot mix asphalt: a review and analysis10.1016/j.resconrec.2014.07.007 ↗
16. Asphalt aging: dual oxidation mechanism and its interrelationships with asphalt composition and oxidative age hardening10.3141/1638-06 ↗
17. A novel approach to understanding asphalt binder aging behavior using asphaltene proportion as a performance indicator10.1520/JTE20140490 ↗
18. Effect of physicochemical factors on asphalt oxidation kinetics
19. Oxidation kinetics of asphalt corbett fractions and compositional dependence of asphalt oxidation10.1080/10916469808949814 ↗
20. Asphalt oxidation mechanisms and the role of oxidation products on age hardening revisited10.1080/14680629.2011.9713895 ↗
21. Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders10.1016/j.fuel.2014.06.038 ↗
22. Investigations on bitumen rejuvenator diffusion and structural stability
23. Turning back time: rheological and microstructural assessment of rejuvenated bitumen10.3141/2444-06 ↗
24. Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators10.1016/j.conbuildmat.2016.02.013 ↗
25. Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures10.1016/j.conbuildmat.2006.03.006 ↗
26. Impact of rejuvenators on aging properties of bitumen10.1016/j.conbuildmat.2015.07.030 ↗
27. Effectiveness of rejuvenator seal materials on performance of asphalt pavement10.1016/j.conbuildmat.2014.01.018 ↗
28. Hot in-place asphalt recycling for small repairs on airfields in remote settings
29. Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures10.1016/j.conbuildmat.2014.08.073 ↗
30. Impacts of rejuvenators on performance and engineering properties of asphalt mixtures containing recycled materials10.1016/j.conbuildmat.2013.12.025 ↗
31. AASHTO: R30, Standard Practice for Mixture Conditioning of Hot Mix Asphalt (HMA), 2015.
32. Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters10.1016/j.conbuildmat.2016.03.144 ↗
33. AASHTO TP 124, Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature, 2016.
34. AASHTO: T 324-16, Standard Method of Test for Hamburg Wheel – Track Testing of Compacted Hot Mix Asphalt (HMA), 2016.
35. I.L. Al-Qadi, H. Ozer, J. Lambros, A. El-Khatib, P. Singhvi, T. Khan, J. Rivera-Perez, B. Doll, Testing Protocols to Ensure Performance of High Asphalt Binder Replacement Mixes Using RAP and RAS, Report No. FHWA-ICT-15-017. Illinois Center for Transportation, Rantoul, IL, 2015.
36. H. Ozer, I.L. Al-Qadi, E. Barber, E. Okte, Z. Zhu, S. Wu, Evaluation of I-Fit Results and Machine Variability Using MNRoad Test Track Mixtures, Report No. FHWA-ICT-17-012. Illinois Center for Transportation. Rantoul, IL, 2017.
37. Rivera-Perez · 2017
38. Y. Yildirim, P. W. Jayawickrama, M. Hossain, A. Alhabshi, C. Yildirim, A. De Fortier Smit, D. Little, Hamburg Wheel-Tracking Database Analysis, Report No. FHWA/TX-05/0-1707-7. Texas Transportation Institute. College Station, TX, 2007.
39. Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents10.1016/j.conbuildmat.2017.03.214 ↗
40. Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test10.3141/2446-01 ↗
41. Evaluation of various hamburg wheel-tracking devices and AASHTO T324 specification for rutting testing of asphalt mixtures10.1080/14680629.2017.1389092 ↗
42. P. Singhvi, H. Ozer, I.L. Al-Qadi, Environmental and Functional Benefits and Trade-Offs of Hot In-Place Recycling Treatment Techniques, Report No. ICT-17-001. Center for Highway Pavement Preservation, Okemos, MI, 2016.
43. I.L. Al-Qadi, D.L. Lippert, S. Wu, H. Ozer, G. Renshaw, T.R. Murphy, A. Butt, S. Gundapuneni, J.S. Trepanier, J.W. Vespa, I.M. Said, A.F. Espinoza-Luque, F.R. Safi, Utilizing Lab Tests to Predict Asphalt Concrete Overlay Performance, Report No. FHWA-ICT-17-020. Illinois Center for Transportation, Rantoul, IL, 2017.
44. Fracture characterization of asphalt mixtures with high recycled content using Illinois semicircular bending test method and flexibility index10.3141/2575-14 ↗