journal article·2018-08

The effect of alternations in mineral additives (zeolite, bentonite, fly ash) on physico-chemical behavior of Portland cement based binders

Anja Terzić, Lato Pezo, Nevenka Mijatović, Jovica Stojanović, Milan Kragović, Ljiljana Miličić, Ljubiša Andrić

Publisher page

Abstract

Abstract Instrumental analyses accompanied by analytical modeling tools were employed to assess physico-chemical changes induced by variations in chemical composition of cementitious composites, i.e. mortar binders. Coal combustion ash was utilized as pozzolanic mineral additive. The binders’ mix-design was supplemented with sorptive clays to prevent migration of toxic elements from fly ash. The experiment was established on the premise of clay’s ion-exchanging ability. Ten binders comprising cement CEM I 42.5 and fly ash, zeolite and/or bentonite additions were prepared in accordance with chemometric experimental design rules. Chemical composition was determined via XRF method. The changes in mineral phases and crystallinity were traced by X-ray diffraction. Hydration mechanisms and thermal behavior were investigated via DTA/TGA. The chemical bonds were identified by FTIR. Morphology of hardened samples was detected by SEM. Mathematical tools employed data sets of instrumental analyses to form a clear differentiation between binders and to assess changes caused by adoption of mineral additives in the mix designs. Sorptive clays showed pozzolanic behavior, thereby causing no incapacitation to the cement hydration mechanism, and classifying as a possible economical resources which can be used in production technology of construction materials to redeem environmental pollution issues of building industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate10.1016/j.buildenv.2006.07.003 ↗
2. Experimental and numerical study on mechanical properties of Ultra High Performance Concrete (UHPC)10.1016/j.conbuildmat.2017.08.170 ↗
3. Advanced mechanical properties and frost damage resistance of ultra-high performance fiber reinforced concrete10.1016/j.conbuildmat.2016.09.012 ↗
4. Mechanical and thermal properties of graphene sulfonate nanosheet reinforced sacrificial concrete at elevated temperatures10.1016/j.conbuildmat.2017.07.157 ↗
5. The microstructural and mechanical properties of geopolymer composites containing glass microfibres10.1016/j.ceramint.2016.12.118 ↗
6. Artificial fly ash based aggregates properties influence on lightweight concrete performances10.1016/j.ceramint.2014.10.086 ↗
7. Production of macroporous ceramics from fibres dispersed mortars (FDM)10.1016/j.ceramint.2005.07.008 ↗
8. Enhanced properties of cement mortars with multilayer graphene nanoparticles10.1016/j.conbuildmat.2017.05.146 ↗
9. Weibull statistical analysis of splitting tensile strength of concretes containing class F fly ash, micro/nano-SiO210.1016/j.ceramint.2013.12.083 ↗
10. Research into the properties of concrete modified with natural zeolite addition10.1016/j.conbuildmat.2016.03.133 ↗
11. Assessment of early-age autogenous shrinkage strains in concrete using bentonite clay as internal curing technique10.1016/j.conbuildmat.2014.05.051 ↗
12. Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars10.1016/j.cemconres.2007.02.005 ↗
13. Evaluation of lignite fly ash for utilization as component in construction materials10.1080/19392699.2013.776960 ↗
14. Service life and global warming potential of chloride exposed concrete with high volumes of fly ash10.1016/j.cemconcomp.2017.03.020 ↗
15. Microstructure and mechanical properties of fly ash blended cement pastes10.1016/j.conbuildmat.2014.10.009 ↗
16. Mix design and properties of fly ash waste lightweight aggregates in structural lightweight concrete
17. Influence of recycled aggregates and high contents of fly ash on concrete fresh properties10.1016/j.cemconcomp.2017.09.009 ↗
18. Laboratory compaction of fly ash and fly ash with cement additions10.1016/j.jhazmat.2007.06.011 ↗
19. Impacts of pH on leaching potential of elements from MSW incineration fly ash10.1016/j.fuel.2016.07.089 ↗
20. Mobility of trace elements in fly ash and in zeolitised coal fly ash10.1016/j.fuel.2014.12.037 ↗
21. Investigation of characteristics and leaching behavior of coal fly ash, coal fly ash bricks and clay bricks10.1016/j.eti.2017.02.002 ↗
22. Diffusion tests of mercury through concrete, bentonite-enhanced sand and sand10.1016/j.jhazmat.2006.08.046 ↗
23. Engineering properties of concrete containing natural zeolite as supplementary cementitious material: strength, toughness, durability, and hygrothermal performance10.1016/j.cemconcomp.2014.09.013 ↗
24. An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan10.1016/j.conbuildmat.2012.04.038 ↗
25. Bentonite as a natural additive for lime and lime–metakaolin mortars used for restoration of adobe buildings10.1016/j.cemconcomp.2015.04.005 ↗
26. FT-IR and XRD analysis of natural Na-bentonite and Cu(II)-loaded Na-bentonite10.1016/j.saa.2011.04.013 ↗
27. Comparative FT-IR study of structural modifications during acid treatment of dioctahedral smectites and hectorite10.1016/S1386-1425(98)00040-7 ↗
28. Removal of heavy metals from wastewaters by Na-exchanged bentonites10.1346/CCMN.2003.0510501 ↗
29. Modification of natural bentonite using a chelating agent for sorption of 60Co radionuclide from aqueous solution10.1016/j.clay.2016.02.021 ↗
30. On the impact of temperatures up to 200 °C in clay repositories with bentonite engineer barrier systems: a study with coupled thermal, hydrological, chemical, and mechanical modeling10.1016/j.enggeo.2015.08.026 ↗
31. The IZA handbook of natural zeolites: a tool of knowledge on the most important family of porous minerals10.1016/j.micromeso.2013.08.028 ↗
32. Ion-exchange process for ammonium removal and release using natural Iranian zeolite10.1016/j.clay.2010.12.020 ↗
33. Antimicrobial behavior of ion-exchanged zeolite X containing fragrance10.1016/j.micromeso.2016.07.006 ↗
34. Ammoxidation of ethylene to acetonitrile over vanadium and molybdenum supported zeolite catalysts prepared by solidstate ion exchange10.1016/j.molcata.2016.02.028 ↗
35. Theoretical study of transition metal cation exchanged zeolites: interaction with NO10.1016/j.theochem.2009.01.029 ↗
36. Application of natural zeolites in anaerobic digestion processes: a review10.1016/j.clay.2012.01.013 ↗
37. Ion-exchange in natural zeolite stilbite and significance in defluoridation ability10.1016/j.micromeso.2014.03.014 ↗
38. Principal component analysis10.1002/wics.101 ↗
39. Predicting compressive strength of different geopolymers by artificial neural networks10.1016/j.ceramint.2012.08.070 ↗
40. Chemometric study of limestone physico-chemical properties and thermal behavior for application in construction composites10.2298/SOS1703247R ↗
41. Artificial neural network approach to estimate composition of chemically synthesized biphasic calcium phosphate powders
42. Analytical modeling of activation procedure applied in α-alumina thermo-mechanical synthesis10.1016/j.ceramint.2015.05.158 ↗
43. Introduction to cement and concrete,10.1016/B978-0-08-100275-9.00017-6 ↗
44. Chemometric assessment of mechano-chemically activated zeolites for application in the construction composites10.1016/j.compositesb.2016.10.040 ↗
45. Optimization of bentonite clay mechano-chemical activation using artificial neural network modeling10.1016/j.ceramint.2016.11.058 ↗
46. Ettringite and C-S-H Portland cement phases for waste ion immobilization: a review10.1016/S0956-053X(96)00072-4 ↗
47. Impact of drying on pore structures in ettringite-rich cements10.1016/j.cemconres.2016.03.003 ↗
48. Determining cement composition by Fourier transform infrared spectroscopy10.1016/1065-7355(94)00031-X ↗
49. Infrared and Raman spectral studies in cement and concrete10.1016/0008-8846(80)90005-8 ↗
50. Vibrational spectroscopic study of syngenite formed during the treatment of liquid manure with sulphuric acid10.1016/S0924-2031(01)00139-4 ↗
51. G. Li, FT-IR Studies of Zeolite Materials: Characterization and Environmental Applications (Ph.D. thesis), University of Iowa, 2005, http://ir.uiowa.edu/etd/96.
52. In-situ FTIR analyses of bentonite under high-pressure10.1016/j.clay.2010.11.017 ↗
53. Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
54. Characterization of zeolites by infrared spectroscopy
55. The effect of mechano-chemical activation and surface treatment of limestone filler on the properties of construction composites10.1016/j.compositesb.2017.02.041 ↗