journal article·2018-07

Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure

Milad Salemi, Hao Wang

Publisher page

Abstract

Abstract Computational modeling is an effective tool to study complex microstructure of stone-based infrastructure material such as asphalt concrete (AC). In this paper, a hybrid approach of image scanning and aggregate packing is developed to randomly generate two-dimension digital specimens of asphalt concrete for virtual testing. Detailed shape characteristics of aggregates are captured using the calibrated high-resolution images. The virtual microstructure is generated based on Random Sequential Addition (RSA) packing after knowing volumetric composition of AC. The microstructure was used for virtual testing of AC using finite element modeling (FEM). Dynamic modulus testing was simulated and the predicted results were validated with laboratory testing results reported in the literature. The robustness and consistency of the packing method were proved by generating different digital specimens with random selection and placement of aggregates having the same gradation. The effect of shape variation of aggregates due to random selection and spatial distribution was found negligible for dynamic modulus predicted from the virtual testing. The discrepancies between simulated and measured results were discussed for future improvements of virtual testing of AC using computational modeling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Near-surface pavement failure under multiaxial stress state in thick asphalt pavement10.3141/2154-08 ↗
2. Effect of volumetric factors on mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties10.1016/j.conbuildmat.2013.08.045 ↗
3. Development of modulus and fatigue test protocol for fine aggregate matrix for axial direction of loading10.1520/JTE20150295 ↗
4. Micromechanical analysis of viscoelastic properties of asphalt concretes10.3141/1789-12 ↗
5. Microstructure-based inherent anisotropy of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000325 ↗
6. Two-dimensional virtual microstructure generation of particle-reinforced composites
7. Effect of air voids on the high-temperature creep behavior of asphalt mixture based on three-dimensional discrete element modeling10.1016/j.matdes.2015.10.005 ↗
8. Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: application to aggregates used in concrete10.1016/S0008-8846(02)00836-0 ↗
9. Three-dimensional digital representation of granular material microstructure from X-ray tomography imaging10.1061/(ASCE)0887-3801(2004)18:1(28) ↗
10. Comparison of 2D and 3D image-based aggregate morphological indices10.1080/10298436.2011.575137 ↗
11. Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures10.1016/j.conbuildmat.2011.12.071 ↗
12. Influence of aggregate particles on mastic and air-voids in asphalt concrete10.1016/j.conbuildmat.2015.05.031 ↗
13. Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology10.1016/j.conbuildmat.2016.05.166 ↗
14. Micromechanical analysis of asphalt mixture fracture with adhesive and cohesive failure10.1016/j.engfracmech.2014.10.029 ↗
15. Evaluation of thermal conductivity of asphalt mixture with heterogeneous microstructure10.1016/j.applthermaleng.2015.03.070 ↗
16. Studying the effect of microstructural properties on the mechanical degradation of asphalt mixtures10.1016/j.conbuildmat.2015.05.108 ↗
17. Generation of virtual asphalt mixture porosity for computational modelling10.1016/j.powtec.2015.01.070 ↗
18. Virtual testing of asphalt mixture with two-dimensional and three-dimensional random aggregate structures10.1080/10298436.2015.1066005 ↗
19. E.A. Masad,Aggregate imaging system (AIMS): Basics and applications, Final Report, FHWA/TX-05/5-1707-01-1, 2005.
20. L. Gates, E. Masad, R. Pyle, D. Bushee, Aggregate Image Measurement System 2 (AIMS2). Final Report, FHWA-HIF-11-030, 2011
21. Random sequential addition of hard spheres10.1080/00268979100100981 ↗
22. Precise algorithm to generate random sequential addition of hard hyperspheres at saturation10.1103/PhysRevE.88.053312 ↗
23. S. Torquato, Random Heterogeneous Materials: Microstructure and Macroscopic Properties, vol. 16, Springer Science & Business Media, 2005.
24. Dynamic modulus prediction of asphalt concrete mixtures through computational micromechanics10.3141/2507-01 ↗
25. Analytical fomulas for film thickness in compacted asphalt mixture10.3141/1829-04 ↗
26. Quantifying laboratory compaction effects on the internal structure of asphalt concrete10.3141/1681-21 ↗
27. 3D particle size distributions from 2D observations: stereology for natural applications10.1016/S0377-0273(98)00043-2 ↗