journal article·2018-09Open access

The role of pH on leaching of heavy metals and chlorides from electric arc furnace dust in cement-based mortars

E.F. Ledesma, A. Lozano-Lunar, J. Ayuso, A.P. Galvín, J.M. Fernández, J.R. Jiménez

Abstract

Electric arc furnace dust (EAFD) presents a pollution hazard due to its heavy metal leachability. Its characterization is essential for recovery or disposal in hazardous waste landfills. The present work discusses the results of encapsulating two electric arc furnace dust samples (EAFD1 and EAFD2) by means of the stabiliza-tion/solidification (S/S) technique in cement-based mortars. The pH influence on the leaching levels of Se, Mo, Cd, and Pb was evaluated using a pH dependence test as analytical support. In addition, the compressive strength of the S/S mortars was meas-ured to verify its behaviour as a monolithic block. The leaching procedures for granu-lar and monolithic mortars were carried out in order to classify the EAFD samples and the S/S mortars made with EAFD according to the legal limit values imposed by the EU Council Decision 2003/33/EC. Thus, the release levels of Se, Mo, Cd, Pb and chlo-ride in the leachate form of EAFD exceeded the legal limit values, and both EAFDs were classified as hazardous wastes. Concerning the compliance test of S/S mortars after crushing, despite lower releases being registered, none of the S/S mortars in the granular state could be classified as non-hazardous waste due to the high Pb level reg-istered. Finally, after analysing the release levels of S/S mortars of EAFD in the mono-lithic state, the S/S mortars of EAFD1 were classified as non-hazardous waste. Regard-ing the S/S mortars of EAFD2, despite the high reduction in the Pb release level after the S/S treatment, these mortars exceeded the hazardous legal limits.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Unesid, Informe 2013 sobre el reciclaje del acero en la Industria Siderúrgica Española, in, https://unesid.org/iris2013/IRWoSNFORMERECICLAJEACERO2013.pdf, 2013.
2. A hydrometallurgical process to treat carbon steel electric arc furnace dust10.1016/0304-386X(92)90077-D ↗
3. Mineral phases of weathered and recent electric arc furnace dust10.1016/j.jhazmat.2007.10.041 ↗
4. Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD): Part I: Characterization and leaching by diluted sulphuric acid10.1016/j.jhazmat.2010.01.059 ↗
5. Possibility of carbon steel EAFD solidification/stabilization in concrete
6. Chemical, physical, structural and morphological characterization of the electric arc furnace dust10.1016/j.jhazmat.2006.01.044 ↗
7. EWC, European Waste Catalog in, https://www.boe.es/boe/dias/1999/01/08/pdfs/A00570-00580.pdf, 2002.
8. Characterization of steel mill electric-arc furnace dust10.1016/j.jhazmat.2004.02.032 ↗
9. Turning waste into valuable resource: potential of electric arc furnace dust as photocatalytic material10.1007/s11356-014-3167-2 ↗
10. Enhancement of electric arc furnace dust by recycling to electric arc furnace10.1061/(ASCE)0733-9372(2002)128:12(1169) ↗
11. Effect of electric arc furnace dust on the properties of OPC and blended cement concretes10.1016/j.conbuildmat.2010.06.024 ↗
12. Kinetics of the volatilization removal of lead in electric arc furnace dust10.2320/matertrans.46.323 ↗
13. S. Pensaert, J. Zwaenepoel, B. Vanhove, J. Dewilde, F. De Naeyer, R.-U. Helmholtz Centre Environmental, Case-study of the first remediation in Flanders by means of on-site immobilization on a heavy metal impacted site, Consoil 2008: Theme E - Remediation Concepts & Technologies, vol. 1–3, (2008) 667–672.
14. Chemical stabilization of scrap metal yard contaminated soil using ordinary portland cement: Strength and leachability aspects10.1016/j.buildenv.2005.09.013 ↗
15. Modeling of zinc solubility in stabilized/solidified electric arc furnace dust10.1016/j.jhazmat.2007.01.102 ↗
16. Immobilisation solidification of hazardous toxic waste in cement matrices10.3989/mc.1999.v49.i254.446 ↗
17. Stabilization and solidification of electric arc furnace dust originating from steel industry by using low grade MgO10.1515/aep-2015-0040 ↗
18. Stabilization of electric-arc furnace dust in concrete10.1590/S1516-14392010000400014 ↗
19. Cementing efficiency of electric arc furnace dust in mortars10.1016/j.conbuildmat.2017.09.074 ↗
20. UNE-EN 14429:2015. Characterization of waste – Leaching behaviour test – Influence of pH on leaching with initial acid/base addition.
21. UNE-EN 12457-4:2003. Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 L/kg for materials with particle size below 10 mm (without or with size reduction).
22. XP X31-211:2012. Waste – test for the determination of the leachability of a solid waste material initially massive or generated by a solidification process.
23. UNE-EN 14899:2007. Characterization of waste – Sampling of waste materials – Framework for the preparation and application of a sampling plan.
24. ArcelorMittal, in, http://corporate.arcelormittal.com/, 2017.
25. Long and short-term performance of a stabilized/solidified electric arc furnace dust10.1016/j.jhazmat.2007.03.034 ↗
26. Experimental study of the mechanical stabilization of electric arc furnace dust using fluid cement mortars10.1016/j.jhazmat.2016.11.051 ↗
27. UNE-EN 1015-3:2000. Methods of test for mortar for masonry. Part 3: Determination of consistence of fresh mortar (by flow table).
28. XP X31-212:2011. Characterization of waste – determination of the massive solid characteristic.
29. UNE-80103:2013. Test methods of cements. Physical analysis. Density determination by the standard le chatelier flask.
30. European Council Decision, in, http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2003:011:0027:0049:EN:PDF, 2003.
31. EEA, English Environmental Agency, in, https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/296422/geho1110btew-e-e.pdf, 2010.
32. Treatment of toxic metal aqueous solutions: encapsulation in a phosphate-calcium aluminate matrix10.1016/j.jenvman.2014.01.044 ↗
33. Solidification/stabilisation of air pollution control residues using Portland cement: physical properties and chloride leaching10.1016/j.wasman.2008.08.006 ↗
34. H. van der Sloot, J. Dijkstra, Development of horizontally Standardized leaching tests for construction materials: a material based or release based approach? Identical leaching mechanisms for different materials, in, http://www.ecn.nl/docs/library/report/2004/c04060.pdf, 2004.
35. Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials10.1016/j.cemconres.2007.04.003 ↗
36. Use of metakaolin to stabilize sewage sludge ash and municipal solid waste incineration fly ash in cement-based materials10.1016/j.jhazmat.2012.10.019 ↗
37. Stabilisation/solidification of APC residues from MSW incineration with hydraulic binders and chemical additives10.1016/j.jhazmat.2013.11.014 ↗
38. Modification and characterization of residue electric arc furnace dust (EAFD) for application in chromium (VI) reduction reactions
39. Investigations on the use of electric-arc furnace dust (EAFD) in Pozzolan-modified Portland cement I (MP) pastes10.1016/j.cemconres.2006.06.003 ↗
40. Steel foundry electric arc furnace dust management: stabilization by using lime and Portland cement10.1016/j.jhazmat.2007.09.066 ↗
41. Hydrometallurgical recovery of zinc and lead from electric arc furnace dust using mononitrilotriacetate anion and hexahydrated ferric chloride10.1016/S0304-3894(01)00394-6 ↗
42. Immobilization of EAFD heavy metals using acidic materials10.1080/10934520701189794 ↗
43. Evaluation of environmental compatibility of EAFD using different leaching standards10.1016/j.jhazmat.2008.11.125 ↗
44. Potentially toxic elements in bottom ash from hazardous waste incinerators: an integrated approach to assess the potential release in relation to solid-phase characteristics10.1007/s10163-016-0505-0 ↗
45. Leaching behaviour of elements from coal combustion fly ash: an overview10.1016/j.coal.2011.10.006 ↗
46. R. Laaksonen, Development of criteria for acceptance of monolithic waste at landfill, 2004.
47. Properties of portland cement pastes incorporating nanometer-sized franklinite particles obtained from electric-arc-furnace dust10.1111/j.1151-2916.2001.tb01114.x ↗
48. Characterization of mercury- and zinc-doped alkali-activated slag matrix – Part II. Zinc10.1016/S0008-8846(03)00046-2 ↗
49. Immobilization of mercury and zinc in an alkali-activated slag matrix10.1016/S0304-3894(03)00143-2 ↗
50. The solubility of calcium zineate (CaZn(2)(OH)(6)center dot 2H(2)O)10.1016/S0008-8846(01)00557-9 ↗
51. A calorimetric and microstructural study of solidified toxic wastes. A classification of OPC waste interference effects10.1016/0956-053X(94)90031-0 ↗
52. Immobilization of Cu, Pb and Zn in mine-contaminated soils using reactive materials10.1016/j.jhazmat.2010.12.039 ↗
53. Investigation of stabilization/solidification for treatment of electric arc furnace dust: dynamic leaching of monolithic specimens10.1016/j.cemconres.2007.08.025 ↗
54. Parameters controlling the release of hazardous waste (Ni2+, Pb2+ and Cr3+) solidified/stabilized by cement-CEM I10.1617/s11527-014-0315-6 ↗