journal article·2018-10

Minimizing cutting wastes of reinforcing steel bars through optimizing lap splicing within reinforced concrete elements

Zahra S. Moussavi Nadoushani, Ahmed W.A. Hammad, Jianzhuang Xiao, Ali Akbarnezhad

Publisher page

Abstract

Abstract A major waste stream in construction of concrete structures is the steel reinforcement waste generated during cutting of steel rebar to their final required lengths. The amount of steel waste generated during the cutting process can be affected considerably by the cutting patterns specified to steel providers after structural design of reinforced concrete elements. This paper proposes a novel approach for minimizing the cutting waste from reinforcing bars by taking advantage of a slight flexibility in selecting the location of lap splices of reinforcing bars within reinforced concrete members as specified by design codes. The focus is placed on identifying the lap splicing patterns for steel reinforcement used in concrete columns and shear walls. A framework to implement the proposed approach is presented and applied to a case study involving the construction of columns and shear walls for an actual 6 storey building. The estimated waste produced after adoption of optimal lap splicing patterns obtained using the allowable flexibility for the lap splices location is compared with the waste generated when cutting patterns are optimized based on fixed lengths, with no flexibility, according to conventional cutting waste minimization methods. The results show a decrease of 50.7% and 55.7% in terms of steel waste generated, and a reduction of 7.7% and 11.8% in steel reinforcement consumption for columns and shear walls, respectively, due to optimizing the lap splicing patterns by the framework.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optimization and Packing Problems · BIM and Construction Integration · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Sustainable structural design methodologies10.1061/(ASCE)SC.1943-5576.0000095 ↗
2. Effects of structural system on the life cycle carbon footprint of buildings10.1016/j.enbuild.2015.05.044 ↗
3. A computational method for selection of optimal concrete recycling strategy10.1680/macr.14.00211 ↗
4. Reducing building waste at construction sites in Hong Kong10.1080/0144619042000202816 ↗
5. Minimizing cutting wastes of reinforcement steel bars using genetic algorithms and integer programming models10.1061/(ASCE)0733-9364(2007)133:12(982) ↗
6. Lapping pattern, stock length, and shop drawing of beam reinforcements of an RC building10.1061/(ASCE)CP.1943-5487.0000303 ↗
7. Building information modeling-based analysis to minimize waste rate of structural reinforcement10.1061/(ASCE)CO.1943-7862.0000508 ↗
8. Three-step solutions for cutting stock problem of construction steel bars10.1007/s12205-014-0238-3 ↗
9. A linear programming approach to the cutting_stock problem10.1287/opre.9.6.849 ↗
10. A linear programming approach to the cutting stock problem—Part II10.1287/opre.11.6.863 ↗
11. One-dimensional cutting stock with a limited number of open stacks: bounds and solutions from a new integer linear programming model10.1111/itor.12134 ↗
12. Controlling cutting pattern in one-dimensional trim problems10.1287/opre.23.3.483 ↗
13. A heuristic for the one-dimensional cutting stock problem with pattern reduction10.1243/09544054JEM966 ↗
14. Heuristics for the one-dimensional cutting stock problem with limited multiple stock lengths10.1016/j.cor.2008.07.001 ↗
15. ACI · 2008
16. I. MathWorks, MATLAB, 2011.
17. Gossett · 2009
18. J.F. Pierce, Some large-scale production scheduling problems in the paper industry in Prentice-Hall, Englewood, N.J, 1964.
19. IBM · 2009
20. Optimising Embodied Carbon and U-value in Load Bearing Walls: A Mathematical Bi-Objective Mixed Integer Programming Approach10.1016/j.enbuild.2018.05.061 ↗