journal article·2018-10Open access

Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete

Hernán Xargay, Paula Folino, Nicolás Nuñez, Martín Gómez, Antonio Caggiano, Enzo Martinelli

Abstract

Este documento investiga el efecto de la alta temperatura en dos materiales compuestos cementosos autocompactantes (SC) diferentes. Las muestras de SC-High Strength (SCHSC) y Fiber-Reinforced Concrete (SCHSFRC) se probaron en flexión de tres puntos después de haber sido expuestas a altas temperaturas a 300 y 600 °C. Además de la respuesta convencional de fuerza-desplazamiento, se monitoreó la actividad de Emisión Acústica (AE) durante las pruebas de flexión con el objetivo de investigar la posible correlación entre el comportamiento de la fractura, la tasa de AE y la influencia de la exposición a altas temperaturas. Las pruebas señalaron claramente los efectos de la exposición al calor. Más específicamente, las muestras de SCHSC mostraron una disminución significativa en las propiedades mecánicas como resultado de los tratamientos térmicos. Luego, se observó una degradación menor para el SCHSFRC después de la exposición al calor a 300 °C, mientras que las muestras expuestas a 600 °C exhibieron una respuesta más dura que el SCHSC correspondiente. Los resultados mostraron que el efecto de las fibras desempeñó un papel beneficioso en la reducción de la expansión de las grietas inducidas por el calor desarrolladas en la matriz de hormigón durante la exposición de las muestras a altas temperaturas. Este efecto puente de las fibras se observó también en términos de la actividad de AE: se registraron sistemáticamente muchos menos eventos de AE para especímenes de SCHSFRC con respecto a los de SCHSC, para un valor dado del desplazamiento de apertura de boca de grieta (CMOD) impuesto. Por lo tanto, las mediciones de AE confirman su potencial para analizar el nivel de daño en materiales compuestos cementosos.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. ACI Committee 363 – ACI 363R-10. (2010). Report on High-Strength Concrete. Reported by ACI Committee 363.
2. An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete10.1016/j.conbuildmat.2015.07.007 ↗
3. ACI Committee 544 – ACI 544.1R-96. (Reapproved 2009). State-of-the-Art Report on Fiber Reinforced Concrete. Reported by ACI Committee 544.
4. Effect of transient high temperature on high-strength concrete
5. Performance of spalling resistance of high performance concrete with polypropylene fibers contents and lateral confinement10.1016/j.cemconres.2004.11.013 ↗
6. Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °C10.1016/j.cemconres.2005.03.007 ↗
7. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures10.1016/j.firesaf.2009.07.001 ↗
8. RILEM Technical Committee 200-HTC: Mechanical concrete properties at high temperatures – modelling and applications. Part 1: Introduction – General presentation. (2007). Materials and Structures, 40, 841-853.10.1617/s11527-007-9285-2 ↗
9. Naus · 2010
10. Effect of fire on concrete and concrete structures10.1002/pse.51 ↗
11. Effects of elevated temperatures on properties of concrete10.1016/j.firesaf.2007.01.003 ↗
12. Effects of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures
13. Variations in the modulus of elasticity and Poisson’s ratio with temperature
14. Pore structures, permeabilities, and compressive strengths of concrete at temperatures up to 800 °C
15. Properties of concrete after high-temperature heating and cooling
16. Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures10.1016/j.firesaf.2011.07.010 ↗
17. Mechanical properties of high performance self-compacting concretes at room and high temperature10.1016/j.conbuildmat.2016.02.132 ↗
18. Residual stress-strain relationship for concrete after exposure to high temperatures10.1016/j.cemconres.2006.05.029 ↗
19. The effect of exposure to elevated temperatures on the fracture energy of plain concrete10.1007/BF02486347 ↗
20. Residual fracture energy of high-performance and normal concrete subject to high temperatures10.1007/BF02480828 ↗
21. Self-consolidating concrete subjected to high temperature Mechanical and physicochemical properties10.1016/j.cemconres.2009.08.001 ↗
22. Phase distribution and microstructural changes of self-compacting cement paste at elevated temperature10.1016/j.cemconres.2007.02.011 ↗
23. Transient strain of self-compacting concrete loaded in compression heated to 700 C10.1617/s11527-012-9894-2 ↗
24. K. Pistol, F. Weise, B. Meng, High temperature behaviour of self-compacting concrete with limestone powder. In Rheology and Processing of Construction Materials: Proceedings of the 7th RILEM International Conference on Self-Compacting Concrete and 1st RILEM International Conference on Rheology and Processing of Construction Materials, RILEM Proceedings PRO 90 (pp. 221-228). RILEM Bagneux (2013).
25. Acoustic emission and ultrasound for damage characterization of concrete elements
26. ASTM E1316–17a: Standard Terminology for Nondestructive Examinations · 2017
27. Grosse · 2008
28. An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams10.1016/j.conbuildmat.2010.11.033 ↗
29. Damage investigation of single-edge notched beam tests with normal strength concrete and ultra high performance concrete specimens using acoustic emission techniques10.1016/j.conbuildmat.2011.12.080 ↗
30. Fracture process zone in notched concrete beam under three-point bending by acoustic emission10.1016/j.conbuildmat.2014.05.012 ↗
31. Experimental analysis of crack evolution in concrete by the acoustic emission technique
32. Fracture monitoring of lightweight composite-concrete beams10.1016/j.compstruct.2017.01.024 ↗
33. Damage assessment of reinforced concrete beams qualified by acoustic emission
34. RILEM Technical Committee 212-ACD: Test method for damage qualification of reinforced concrete beams by acoustic emission. (2010). Materials and Structures, 43, 1183-1186.10.1617/s11527-010-9639-z ↗
35. Evaluation of strengthened RC beams: cyclic load test and acoustic emission methods
36. Evaluation of reinforced concrete beam specimens with acoustic emission and cyclic load test methods
37. Predicting the ultimate bending capacity of concrete beams from the ‘‘relaxation ratio’’ analysis of AE signals10.1016/j.conbuildmat.2005.06.004 ↗
38. Estimating operating load conditions on reinforced concrete highway bridges with b-value analysis from acoustic emission monitoring10.1177/1475921710365424 ↗
39. An experimental study on loading rate effect on acoustic emission based b-values related to reinforced concrete fracture10.1016/j.conbuildmat.2014.07.076 ↗
40. Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission10.1016/j.ymssp.2015.02.006 ↗
41. Temporal and spatial development of drying shrinkage cracking in cement-based materials10.1016/S0013-7944(02)00150-9 ↗
42. Advanced structural health monitoring of concrete structures with the aid of acoustic emission10.1016/j.conbuildmat.2014.04.103 ↗
43. Ohtsu · 2015
44. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
45. Classification of cracking mode in concrete by acoustic emission parameters10.1016/j.mechrescom.2011.03.007 ↗
46. Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features10.1016/j.conbuildmat.2014.05.015 ↗
47. Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time tomography10.1016/j.conbuildmat.2014.05.011 ↗
48. Experimental study on AE characteristics of three-point-bending concrete beams10.1016/j.cemconres.2003.08.021 ↗
49. Acoustic emission behavior of steel fibre reinforced concrete under bending10.1016/j.conbuildmat.2009.06.042 ↗
50. Acoustic emission characterization of the fracture process in fibre reinforced concrete10.1016/j.conbuildmat.2011.04.049 ↗
51. Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emission10.1016/j.conbuildmat.2012.06.066 ↗
52. Acoustic emission analysis and thermo-hygro-mechanical model for concrete exposed to fire
53. Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission10.1016/j.conbuildmat.2012.06.070 ↗
54. The influence of thermal-stressing (up to 1000 °C) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete10.1016/j.conbuildmat.2013.01.020 ↗
55. Effect of high temperature on mechanical and acoustic emission properties of calcareous-aggregate concrete10.1016/j.applthermaleng.2016.06.107 ↗
56. Temperature effects on failure behavior of self-compacting high strength plain and fiber reinforced concrete10.1016/j.conbuildmat.2017.12.137 ↗
57. Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices10.1016/j.cemconcomp.2015.04.015 ↗
58. RILEM Technical Committee 162-TDF: Test and design methods for steel fibre reinforced concrete – Bending test. (2002). Materials and Structures, 35, 579–582.10.1617/13884 ↗
59. Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete10.1016/j.conbuildmat.2016.08.068 ↗
60. RILEM Technical Committee 50-FMC: Determination of fracture energy of mortar and concrete by means of three point bend tests on notched beams
61. A. Pollock, Acoustic emission inspection, Technical report, TR-103-96-12/89, Physical Acoustics corporation, 195 Clarksville Road, Princeton Jct., NJ., USA (1989).
62. Acoustic emission applied to study crack propagation in concrete10.1007/BF02472508 ↗
63. ACI Committee 224 – ACI 224R-01. (2001). Control of cracking in concrete structures. Reported by ACI Committee 244.
64. RILEM Technical Committee 212-ACD: Test method for classification of active cracks in concrete structures by acoustic emission. (2010). Materials and Structures, 43, 1187-1189.10.1617/s11527-010-9640-6 ↗
65. FS3N, Steel fibres for concrete, Maccaferri Technical
66. FIBROMAC12®, Mono-filamentary polypropylene fibre, Maccaferri Technical Data Sheet, 2010.