journal article·2019-01

Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites

Cong Ding, Liping Guo, Bo Chen, Yanhui Xu, Yuanzhang Cao, Chunguang Fei

Publisher page

Abstract

Abstract High-ductility cementitious composites (HDCCs) with multiple cracking and excellent tensile strain behavior have been widely studied. The fiber component plays a pivotal role and its surface state directly determines the mechanical performances of composites. In this work, micromechanics design theory was used to guide polyvinyl alcohol (PVA) fiber surface treatment. Based on the strength criterion, energy criterion and fracture criterion, the frictional bond strength needs to be limited to an appropriate range. In addition, three different modifying agents (i.e., an oil agent, hydrophilic silica, and nanoscale graphite) were applied as coatings to the PVA fiber surface. The results showed that the hydrophilic silica-treated PVA fibers (S-PVAF) and nanoscale graphite-treated PVA fibers (G-PVAF) exhibited high hydrophobicity and roughness; consequently, the chemical bonding was greatly reduced. However, the S-PVAF still exhibited breakage and abrasion damage during the pullout process, whereas the G-PVAF were pulled out completely. Finally, the fiber bridging stress versus crack opening σ ( δ ) relation was studied by using notched coupon specimens. G-PVA-HDCCs exhibited greater complementary energy. The tensile ductility reached 2.7%, which was higher than that of oiled PVA-HDCC. The results showed the promising advantages of using nanoscale graphite for surface treatment to achieve a higher surface quality.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Durability of mechanically loaded engineered cementitious composites under highly alkaline environments10.1016/j.cemconcomp.2007.09.004 ↗
2. Reinforced geopolymer composites for enhanced material greenness and durability10.1016/j.scs.2011.07.009 ↗
3. An improved image processing method for assessing multiple cracking development in strain hardening cementitious composites (SHCC)10.1016/j.cemconcomp.2016.10.005 ↗
4. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
5. The role of flaw size and fiber distribution on tensile ductility of PVA-ECC10.1016/j.compositesb.2013.08.089 ↗
6. Nanoscale characterization of engineered cementitious composites (ECC)10.1016/j.cemconres.2010.11.001 ↗
7. On engineered cementitious composites (ECC) a review of the material and its applications10.3151/jact.1.215 ↗
8. Deterioration of bond capacity of plasma-treated polymer fiber reinforcement10.1016/j.cemconcomp.2018.03.010 ↗
9. Study on fiber hybridization effect of engineered cementitious composites with low-and high-modulus polymeric fibers10.1016/j.conbuildmat.2016.02.112 ↗
10. Multiple cracking response of plasma treated polyethylene fiber reinforced cementitious composites under flexural loading10.1016/j.cemconcomp.2011.12.001 ↗
11. Interfacial bond between reinforcing fibers and calcium sulfoaluminate cements: fiber pullout characteristics
12. Measuring and modifying interface properties of PVA fibers in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
13. Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces10.1016/S0022-5096(96)00095-6 ↗
14. Matrix tailoring of engineered cementitious composites (ECC) with non-oil-coated, low tensile strength PVA fiber10.1016/j.conbuildmat.2017.11.072 ↗
15. Tensile strain-hardening behavior of PVA-ECC
16. Interface tailoring for strain-hardening PVA-ECC
17. Effects of fiber-matrix interaction on multiple cracking performance of polymeric fiber reinforced cementitious composites10.1016/j.compositesb.2013.03.043 ↗
18. The phenomena of rupture and flow in solids
19. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)10.1016/j.conbuildmat.2014.12.071 ↗
20. Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash10.1016/j.conbuildmat.2013.11.001 ↗
21. Mechanical and thermal properties of green lightweight engineered cementitious composites10.1016/j.conbuildmat.2013.07.104 ↗
22. Effect of composition on flexural behavior of engineered cementitious composites10.1007/s11431-012-4990-7 ↗
23. Preparation and performance of the modified high-strength/high-modulus polyvinyl alcohol fiber/polyurethane grouting materials10.1016/j.conbuildmat.2018.02.173 ↗
24. Fiber/cement interface tailoring with plasma treatment10.1016/S0958-9465(98)00053-5 ↗
25. Impact of surface plasma treatment on the performance of PET fiber reinforcement in cementitious composites10.1016/j.cemconres.2016.08.018 ↗
26. Effect of fiber treatments on the sisal fiber properties and fiber-matrix bond in cement based systems10.1016/j.conbuildmat.2015.10.120 ↗
27. Engineered cementitious composites with high-volume fly ash
28. Designing added functions in engineered cementitious composites
29. Wu · 2001
30. Micromechanics of crack bridging in fibre-reinforced concrete10.1007/BF02472808 ↗
31. New micromechanics design theory for pseudo strain hardening cementitious composite
32. Effect of slip-hardening interface behavior on fiber rupture and crack bridging in fiber-reinforced cementitious composites
33. Effect of fiber strength and fiber-matrix interface on crack bridging in cement composites
34. Ductile cement-based composites with wood fibers-material design and experimental approach
35. Wettability measurement and hydrophobicity mechanism analysis of leaf surface of hylotelephium erythrostictum
36. Droplet spreading on rough surfaces: tackling the contact line boundary condition10.1063/1.4941577 ↗