Material selections in asphalt pavement for wet-freeze climate zones: A review
Source abstract
Abstract
Abstract The objectives of this review paper are to document current practices in wet-freeze climate zones and introduce emerging technologies that would be largely implemented in wet-freeze climate zones in the near future. A current practice is defined as a procedure that has been shown by research or experience to produce acceptable results and that is established or proposed as a standard suitable for widespread adaptation. An emerging technology is defined as a technique or a material that can improve the asphalt pavement performance, partly replace general materials, and contribute to more sustainable asphalt pavements. This review identified the criteria used to determine locations in the United States and two Canadian provinces with a similar wet-freeze climate. In addition, asphalt binders, asphalt additives/modifiers, asphalt mixture types, reclaimed asphalt mixtures, asphalt mixture test methods, asphalt mixture design methods, and deicers were reviewed. This review concluded with some recommendations in terms of using environmentally friendly materials and selecting cracking and rutting failure criteria to design asphalt mixtures with enhanced performance in wet-freeze climates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Smart Materials for Construction · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Appendix I: Climate Zone Definitions
2. J. Mahoney, M. Rutherford, R. Hicks, Guidelines for Spring Highway Use Restrictions, 1987.
3. Federal Highway Administration, Highway Performance Monitoring System Field Manual, 2014.
4. National Climatic Data Center. Air Freezing Index-USA Method, National Climatic Data Center [cited 2017 April 1st]; Available from: https://www.ncdc.noaa.gov/sites/default/files/attachments/Air-Freezing-Index-Return-Periods-and-Associated-Probabilities.pdf.
5. Calculating insulation needs to fight frost heave by comparing freezing index and frost depth. In: Tech Solutions 605.0. DOW Chemical Canada-Building Solutions. Available from: http://msdssearch.dow.com/PublishedLiteratureDOWCOM/dh_01f6/0901b803801f6296.pdf?filepath=styrofoam/pdfs/noreg/178-00754.pdf&fromPage=GetDoc.
6. Average Annual State Temperatures, Current Results, Weather and Science Fact. Available from: https://www.currentresults.com/Weather/US/average-annual-state-temperatures.php.
7. Canada Cities Annual Temperature, Current Results, Weather and Science Facts. Available from: https://www.currentresults.com/Weather/Canada/Cities/temperature-annual-average.php.
8. Effect of short-term ageing temperature on bitumen properties10.1080/14680629.2017.1304268 ↗
9. Asphalt Institute, SP-1 Superpave Performance Graded Asphalt Binder Specifications and Testing, 2001, Lexington, Kentucky.
10. Michigan Department of Transportation · 2016 · 1
11. Van Dam · 2015 · 61801
12. Development of a Testing Approach for Tack Coat Application Rate at Pavement Layer Interfaces
13. Tack Coat Best Practices
14. Ohio Department of Transportation · 2013 · 1190
15. Clark · 2012 · 18
16. Jurgensen Companies, Trackless Tack, 2017 [cited 2017 October 19]; Available from: http://www.jrjnet.com/product/asphalt/trackless-tack/.
17. Heartland Asphalt Materials, Trackless Tack, 2011 [cited 2017 October 20]; Available from: http://www.heartlandasphaltmaterials.com/Trackless%20Tack.aspx.
18. Blacklidge, UltraTack®. 2017 [cited 2017 October 17]; Available from: http://blacklidgeemulsions.com/himod-technology/#ultratack.
19. Al-Qadi · 2012 · 26
20. Al-Qadi · 2012 · 59
21. Special Provision for Low-Tracking Bond Coat Emulsified Asphalt, Permissive Use
22. Tayabji · 2010
23. Aging influence on rheology properties of petroleum-based asphalt modified with biobinder10.1061/(ASCE)MT.1943-5533.0000712 ↗
24. Partial replacement of asphalt binder with bio-binder: characterisation and modification10.1080/10298436.2011.596937 ↗
25. High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests10.1016/j.conbuildmat.2014.11.063 ↗
26. High temperature performance of SBS modified bio-asphalt10.1016/j.conbuildmat.2017.03.103 ↗
27. Asphalt binders blended with a high percentage of biobinders: aging mechanism using FTIR and rheology10.1061/(ASCE)MT.1943-5533.0001117 ↗
28. Chemical characterization and oxidative aging of bio-asphalt and its compatibility with petroleum asphalt10.1016/j.jclepro.2016.11.100 ↗
29. Optimization of bio-asphalt using bio-oil and distilled water10.1016/j.jclepro.2017.07.154 ↗
30. Thermal storage stability of bio-oil modified asphalt10.1061/(ASCE)MT.1943-5533.0002237 ↗
31. Using bio-based rejuvenator derived from waste wood to recycle old asphalt10.1016/j.conbuildmat.2018.08.201 ↗
32. Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources10.1016/j.conbuildmat.2013.11.017 ↗
33. Effectiveness of asphalt penetrating sealers in extending new asphalt pavement
34. Watson · 2012 · 83
35. Evaluation of the Moisture Susceptibility of WMA Technologies
36. Topic 1: Inroduction and Seminar Objectives
37. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
38. Hawley · 1997
39. Polymer modified asphalt
40. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
41. Woolley · 2000
42. Effect of styrene-butadiene-styrene on the properties of asphalt and stone-matrix-asphalt mixture10.1061/(ASCE)MT.1943-5533.0000185 ↗
43. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
44. Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene10.1016/j.conbuildmat.2016.09.014 ↗
45. Papagiannakis · 1995 · 97
46. Hicks · 2010
47. Cheng · 2012
48. Z. You, X. Yang, Q. Dai, Low Emission Asphalt with Crumb Rubber, 2016: Reported to Michigan Department of Environmental Qualify.
49. Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm10.1016/j.jclepro.2017.04.168 ↗
50. K.R. Hansen, A. Copeland, Asphalt Pavement Industry Survey on Recycled Materials and Warm-mix Asphalt Usage: 2014, 2015: Washington, DC.
51. Harvey · 1995
52. Establishing a baseline of knowledge through 2005 by reviewing AI IS-220
53. Modification mechanism of asphalt modified with Sasobit and Polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.03.043 ↗
54. Workshop summary
55. Department of transportation perspective: a survey on polyphosphoric acid use and issues
56. Federal Highway Administration · 2012 · 13
57. Minnesota Department of Transportation. Asphalt Binder Modification-MnROAD Field Investigation of Polyphosphoric Acid Modified Asphalt. Road Research 2017; Available from: http://www.dot.state.mn.us/mnroad/projects/Polyphosphoric_Acid_Mod_Asphalt/index.html.
58. Minnesota Department of Transportation, Road Research: MnRoad – Field Monitoring, 2016.
59. Von Quintus · 2014
60. Fiber-reinforced asphalt-concrete – a review10.1016/j.conbuildmat.2009.11.009 ↗
61. Field performance of fabrics and fibers to retard reflective cracking10.1016/0266-1144(89)90005-8 ↗
62. Prospect of using glass fiber reinforced bituminous mixes
63. Application of cracking and seating and use of fibers to control reflective cracking
64. The effect of polypropylene fibers on asphalt performance10.1016/j.buildenv.2007.02.011 ↗
65. H.L. Von Quintus, J. Mallela, R.L. Lytton, Techniques for Mitigation of Reflective Cracks, in 2010 FAA Worldwide Airport Technology Transfer Conference. 2010: Atlantic City, New Jersey.
66. Investigation of the conductivity of asphalt concrete containing conductive fillers10.1016/j.carbon.2004.12.033 ↗
67. Review of advances in micromechanical modeling of aggregate–aggregate interactions in asphalt mixtures10.1139/l06-113 ↗
68. Effect of deicing solutions on the tensile strength of micro-or nano-modified asphalt mixture10.1016/j.conbuildmat.2010.06.038 ↗
69. Exploring the interactions of chloride deicer solutions with nanomodified and micromodified asphalt mixtures using artificial neural networks10.1061/(ASCE)MT.1943-5533.0000452 ↗
70. Nanoclay-modified asphalt materials: preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
71. Developments of nano materials and technologies on asphalt materials–a review10.1016/j.conbuildmat.2017.03.158 ↗
72. Moisture susceptibility evaluation of nanosize hydrated lime-modified asphalt-aggregate systems based on surface free energy concept10.3141/2446-06 ↗
73. Fourier transform infrared spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders10.1016/j.conbuildmat.2015.10.085 ↗
74. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder10.1016/j.conbuildmat.2016.03.152 ↗
75. Effectiveness of micro-and nanomaterials in asphalt mixtures through dynamic modulus and rutting tests10.1155/2016/2645250 ↗
76. Performance of micro-and nano-modified asphalt mixtures through flow number and moisture susceptibility evaluations10.1520/JTE20150434 ↗
77. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
78. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
79. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay10.1016/j.conbuildmat.2012.02.056 ↗
80. Effects of regular-sized and nanosized hydrated lime on binder rheology and surface free energy of adhesion of foamed warm mix asphalt10.1061/(ASCE)MT.1943-5533.0001222 ↗
81. Property analysis of exfoliated graphite nanoplatelets modified asphalt model using molecular dynamics (MD) method10.3390/app7010043 ↗
82. Material Characteristics of Hot Mix Asphalt and Binder Using Freeze-Thawing Condition
83. Michigan Department of Transportation, Special Provision for Superpave HMA Mixtures, 2007: michiganltap.org.
84. Prowell · 2012
85. Performance of warm mix asphalt containing Sasobit®: state-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
86. Gradation segregation analysis of warm mix asphalt mixture10.1061/(ASCE)MT.1943-5533.0002208 ↗
87. Hurley · 2010 · 73
88. Aurilio · 2009
89. Field Performance of Warm Mix Asphalt Technologies
90. A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques10.1016/j.conbuildmat.2017.06.135 ↗
91. Comparative study on the properties of WMA mixture using foamed admixture and free water system10.1016/j.conbuildmat.2013.06.028 ↗
92. Quantification of physicochemical properties, activation energy, and temperature susceptibility of foamed asphalt binders10.1016/j.conbuildmat.2017.07.123 ↗
93. Preliminary laboratory evaluation of methanol foamed warm mix asphalt binders and mixtures10.1061/(ASCE)MT.1943-5533.0002085 ↗
94. Characteristics of water-foamed asphalt mixture under multiple freeze-thaw cycles: laboratory evaluation10.1061/(ASCE)MT.1943-5533.0002474 ↗
95. Laboratory testing of rheological behavior of water-foamed bitumen10.1061/(ASCE)MT.1943-5533.0002362 ↗
96. Washington State University · 2017
97. Warm mix asphalt using sasobit® in cold region
98. Kristjansdottir · 2006 · 92
99. Laboratory moisture susceptibility evaluation of WMA under possible field conditions10.1016/j.conbuildmat.2015.10.004 ↗
100. Hurley · 2009 · 40