journal article·2019-03Open access

Compressive strength of high-strength concrete masonry grouted prisms

Fernando S. Fonseca, Ernesto S. Fortes, Guilherme A. Parsekian, Jefferson S. Camacho

Abstract

Abstract An experimental program was devised to assess the influence of the compressive strength of the grout on the compressive strength of masonry constructed with high-strength concrete masonry units. Three different compressive strengths of mortar, grout, and concrete masonry units were used. Grouts were made without and with a shrinkage-compensating admixture. The various components were combined to construct several hollow and grouted prisms, which were then tested. The results show that very high-strength blocks were not as efficient as medium-strength blocks and that there was a difference between the compressive strengths of ungrouted and grouted masonry; depending on the combination of the materials used, grouted masonry can be less or more efficient than ungrouted masonry. For one combination of materials, the shrinkage-compensating admixture was shown to be effective in reducing the grout shrinkage, and the grouted prisms constructed with that combination of materials were more efficient than their hollow prisms counterpart. Grouted prisms constructed with grouts without the shrinkage-compensating admixture were, on average, less efficient than hollow prisms. The efficiency of grouted masonry depends on many factors including compatibility of deformation between the masonry components, compaction of the grout, shrinkage characteristics of the grout, block geometry, and bond between grout and block. Further research is needed to determine the influence of these factors and obtain a complete understanding of the behavior and capacity of high strength masonry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Microbial Applications in Construction Materials · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. NCMA EK 9-4A · 2005
2. Behavior of concrete block masonry under axial compression
3. Suggested failure criteria for grouted masonry under axial compressive
4. Compressive strength of concrete masonry prism
5. The prediction of compressive strength of ungrouted hollow concrete block masonry10.1016/j.conbuildmat.2014.01.025 ↗
6. Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method10.1016/j.conbuildmat.2016.01.048 ↗
7. Finite element analysis of concrete masonry prisms
8. On the compressive strength prediction for concrete masonry prisms10.1617/s11527-009-9492-0 ↗
9. Factors influencing compressive strength of concrete masonry prism10.1680/macr.1996.48.175.95 ↗
10. Effects of joint thickness, adhesion and web shells to the face shell bedded concrete masonry loaded in compression10.7158/S12-035.2013.14.3 ↗
11. Strength, behavior, and failure mode of hollow concrete masonry constructed with mortars of different strengths10.1016/j.conbuildmat.2016.12.112 ↗
12. A.A. Hamid, R.G. Drysdale, A.C. Heidebrecht, Effect of grouting on the strength characteristics of concrete block masonry, in: Proceedings of the NAMC 1987, the 4th North American Masonry Conference. The Masonry Society, Los Angeles, CA, 11-1 – 11-17.
13. R.H. Atkinson, G.R. Kingsley. A comparison of the behavior of clay and concrete masonry in compression, TCCMAR Report No. 1.1-1, U.S. – Japan Coordinated Program for Masonry Building Research, 1985.
14. A.A. Hamid, M. Bolhassani, A.Turner, E. Minaie, F.L. Moon. Mechanical properties of ungrouted and grouted concrete masonry assemblages, in: Proceeding of the 13th CMS, 2017, the 13th Canadian Masonry Symposium, Halifax, Canada.
15. Compression behavior and failure mechanisms of concrete masonry prisms10.1061/(ASCE)0899-1561(2005)17:1(107) ↗
16. Influence of blocks and grout on compressive strength and stiffness of concrete masonry prisms10.1016/j.conbuildmat.2018.06.091 ↗
17. Simplified micro modeling of partially grouted masonry assemblages10.1016/j.conbuildmat.2015.03.021 ↗
18. Stress-strain curves for unconfined and confined concrete masonry
19. Strength and deformation of confined and unconfined grouted concrete masonry
20. Relationship between the compressive strength of concrete masonry and the compressive strength of concrete masonry units10.1061/(ASCE)MT.1943-5533.0001204 ↗
21. Compressive strength of masonry constructed with high strength blocks
22. High-strength concrete masonry walls under concentric and eccentric loadings10.1061/(ASCE)ST.1943-541X.0001978 ↗
23. Hotchwalt · 2012
24. TMS 402/602-16 · 2016
25. CSA S304.1-14 · 2014
26. BS 5628-3 · 2005
27. CSN EN 1996-1-1+A1 · 2012
28. AS 3700:2018 · 2018
29. NZS 4230:2004 · 2004
30. Properties of mortar using cubes, prism halves, and cylinder specimens
31. NBR 15961-2 · 2011
32. NBR 12118 · 2011
33. Parsekian · 2012
34. NBR 13279 · 2005
35. NBR 5738 · 2003
36. NBR 5739 · 2007
37. DRY®D1 (C and M) Rev, 23/10/2008, Expansive admixture for cement based mortars and concretes. , 2015.
38. Drysdale · 2008
39. ASTM C1019-11 · 2011
40. ASTM C1314-12 · 2012
41. Chahine · 1989