journal article·2019-04

Effect of aggregate contact characteristics on densification properties of asphalt mixture

Jiange Li, Peilong Li, Jinfei Su, Yu Xue, Wenyu Rao

Publisher page

Abstract

Abstract The densification properties of asphalt mixture are an external manifestation of aggregate contact action, including the friction, interlocking and dislocation of aggregates as well as the cohesion of asphalt binder during compaction. The asphalt binder also has a lubrication effect on the contact action at the high temperature. To investigate the effect of aggregate contact characteristics on the densification properties of asphalt mixture, an aggregate contact device was developed and aggregate contact tests were conducted on different conditions. Two parameters, F that refers to the maximum contact force composed of friction and interlocking force and E that refers to the required energy during the whole test, were gained according to the contact test curve. Considering the lubrication of asphalt binder at the high temperature, the MF and ME refer to the dry mixture, while the AMF and AME refer to the asphalt mixture. The densification parameters were obtained by means of analyzing the densification curves. Then the relationships between the parameters of aggregate contact and those of densification of asphalt mixture were discussed. The results indicate that the aggregate contact action composed of friction and interlocking force increases with the enlargement of nominal maximum aggregate size (NMAS) of the asphalt mixture, and the values of MF and ME increase with the increase of NMAS. The asphalt binder has a significant lubrication effect on the aggregate contact at the high temperature. The contact action of asphalt mixture with a dense gradation is lubricated enough is prone to be compacted. Comparing to test temperature and asphalt content, the gradation of mixture and its NMAS are more easily to affect the contact action, which has the significant effect on the densification properties of the asphalt mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Morphological characteristics of aggregates and their influence on the performance of asphalt mixture10.1016/j.conbuildmat.2018.07.124 ↗
2. Study on the correlation between aggregate skeleton characteristics and rutting performance of asphalt mixture10.1016/j.conbuildmat.2018.05.153 ↗
3. Effect of coarse aggregate morphology on the mechanical properties of stone matrix asphalt10.1016/j.conbuildmat.2017.06.062 ↗
4. Effect of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt10.1061/(ASCE)0733-947X(2006)132:7(580) ↗
5. Unloading of an elastic–plastic loaded spherical contact10.1016/j.ijsolstr.2004.12.006 ↗
6. Evaluating the shear-friction resistance across sliding planes in concrete10.1016/j.engstruct.2011.01.013 ↗
7. Micromechanical model for asphalt mixture coupling inter-particle effect and imperfect interface10.1016/j.conbuildmat.2017.05.015 ↗
8. Compaction characteristics of asphalt mixture with different gradation type through superpave gyratory compaction and X-ray CT scanning10.1016/j.conbuildmat.2016.10.098 ↗
9. Evaluation of deformation properties of asphalt mixture using aggregate slip test10.1080/10298436.2015.1007229 ↗
10. Effect of aggregate contact condition on skeleton stability in asphalt mixture
11. Microstructural viscoplastic continuum model for permanent deformation in asphalt pavements
12. Particle flow during compaction of asphalt model materials10.1016/j.conbuildmat.2015.09.061 ↗
13. Numerical modeling of compaction and flow of coke/pitch mixtures using discrete element method10.1016/j.conbuildmat.2018.02.121 ↗
14. Analysis of parameters affecting asphalt mixture performance and new perspectives on the design parameters10.1016/j.conbuildmat.2018.04.130 ↗
15. Method for predicting the laboratory compaction behavior of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001244 ↗
16. Effect of compaction temperature and procedure on the design of asphalt mixtures using Marshall and gyratory compactors10.1016/j.conbuildmat.2014.04.135 ↗
17. Microstructure characterization of cold in-place recycled asphalt mixtures by X-ray computed tomography10.1016/j.conbuildmat.2018.03.203 ↗
18. Analysis of viscous flow properties of asphalt in aging process10.1016/j.conbuildmat.2016.06.136 ↗
19. Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure10.1016/j.conbuildmat.2018.05.139 ↗
20. Analysis of viscoelastic response and creep deformation mechanism of asphalt mixture10.1016/j.conbuildmat.2018.03.104 ↗
21. Performance evaluation of bitumen modified with pyrolysis carbon black made from waste tyres10.1016/j.conbuildmat.2016.02.143 ↗
22. Characterization of particle movement in Superpave gyratory compactor at meso-scale using SmartRock sensors10.1016/j.conbuildmat.2018.04.146 ↗
23. Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures10.1080/10298436.2014.925551 ↗
24. High temperature characteristics of warm mix asphalt mixtures with nanoclay and chemical warm mix asphalt modified binders10.1016/j.jclepro.2016.02.033 ↗
25. Influence of the properties of filler on high and medium temperature performances of asphalt mastic10.1016/j.conbuildmat.2016.05.041 ↗
26. Effect of chemical composition of aggregate on interfacial adhesion property between aggregate and asphalt10.1016/j.conbuildmat.2017.04.061 ↗
27. Study on adhesion between asphalt binders and aggregate minerals under ambient conditions using particle-modified atomic force microscope probes10.1016/j.conbuildmat.2015.10.011 ↗
28. Impact of particle morphology on aggregate-asphalt interface behavior10.1016/j.conbuildmat.2016.11.132 ↗
29. Effects of adhesion promoters on the contact angle of bitumen-aggregate interface10.1016/j.ijadhadh.2016.07.013 ↗
30. The effect of freeze–thaw cycle on the low-temperature properties of asphalt fine aggregate matrix utilizing bending beam rheometer10.1016/j.coldregions.2016.02.008 ↗
31. Effect of compaction methods and aggregate gradations on air voids distribution in asphalt mixtures
32. Compaction temperatures of Sasobit produced warm mix asphalt mixtures modified with SBS10.1016/j.conbuildmat.2016.07.015 ↗