journal article·2019-06

Tests on seismic performance of corroded reinforced concrete shear walls repaired with basalt fiber-reinforced polymers

Dejian Shen, Qun Yang, Congbin Huang, Zhenghua Cui, Jinyang Zhang

Publisher page

Abstract

Abstract Reinforcement corrosion caused by carbonation of the concrete cover or excessive chloride concentration primarily leads to the deterioration of reinforced concrete (RC) structures. To address the issue of reinforcement corrosion in RC structures, basalt fiber-reinforced polymer (BFRP) is today slowly gaining acceptability as an effective alternative to repair corroded RC structures in seismic areas. The present paper aims to evaluate the feasibility of using BFRP as externally bonded jackets applied on the surface of the RC shear walls. Seven medium-rise walls with aspect ratios of 1.6 were tested under the combination of constant axial load and cyclic lateral load, including one original mock-up, three corroded mock-ups with various corrosion rates, and three corroded mock-ups repaired with BFRP jackets. The seismic performance of original and repaired mock-ups with respect to failure mode, hysteretic behavior, stiffness, ductility, energy dissipation capacity, and strength was discussed. In addition, a strut-and-tie model in consideration of reinforcement corrosion and FRP confinement as well as a model for confining stress distribution of cross-sections featuring large aspect ratio (over 2) were proposed. The test and theoretical results show that application of BFRP jackets is able to minimize the corrosion concerns and restore the seismic performance of corroded RC shear walls.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Finite element analysis of cracking and delamination of concrete beam due to steel corrosion10.1016/j.engstruct.2013.04.005 ↗
2. Determining corrosion levels in the reinforcement rebars of buildings in coastal areas. A case study in the Mediterranean coastline10.1016/j.conbuildmat.2015.09.059 ↗
3. Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behavior10.1016/j.conbuildmat.2015.10.139 ↗
4. Nonlinear stress-strain behaviour of corrosion-damaged reinforcing bars including inelastic buckling10.1016/j.engstruct.2012.09.034 ↗
5. Bond behavior of corroded reinforcement bars
6. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
7. Bearing capacity of steel-caged RC columns under combined bending and axial loads: estimation based on Artificial Neural Networks10.1016/j.engstruct.2013.06.039 ↗
8. Strain rate effect on bond stress-slip relationship between basalt fiber-reinforced polymer sheet and concrete10.1177/0731684415574539 ↗
9. Strain rate effect on effective bond length of basalt FRP sheet bonded to concrete10.1016/j.conbuildmat.2015.02.016 ↗
10. Repair of corrosion-damaged columns with FRP wraps10.1061/(ASCE)1090-0268(2001)5:1(3) ↗
11. Seismic behavior of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel jacket10.1016/j.conbuildmat.2009.01.003 ↗
12. In-plane behavior of seismically damaged masonry walls repaired with external BFRP10.1016/j.compstruct.2013.01.031 ↗
13. Bond stress-slip relationship between basalt fiber-reinforced polymer bars and concrete using a pull-out test10.1177/0731684415627504 ↗
14. Bond behavior between basalt fiber-reinforced polymer sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load10.1061/(ASCE)CC.1943-5614.0000349 ↗
15. Performance of concrete beams reinforced with basalt FRP for flexure and shear10.1061/(ASCE)CC.1943-5614.0000491 ↗
16. Dynamic bond stress-slip relationship between basalt FRP sheet and concrete under initial static loading
17. Environmental resistance and mechanical performance of basalt and glass fibers10.1016/j.msea.2010.04.021 ↗
18. Behavior of reinforced concrete box beam with initial cracks repaired with basalt fiber-reinforced polymer sheet10.1177/0731684415595469 ↗
19. Seismic performance of RC short columns strengthened with BFRP10.4028/www.scientific.net/AMM.351-352.1532 ↗
20. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
21. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns10.1016/j.engstruct.2014.06.043 ↗
22. Evaluation of hysteretic response and strength of repaired R/C walls strengthened with FRPs10.1016/j.engstruct.2006.11.021 ↗
23. Tests on seismically damaged reinforced concrete structural walls repaired using fiber-reinforced polymers10.1061/(ASCE)CC.1943-5614.0000110 ↗
24. American Concrete Institute (ACI) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R-08), American Concrete Institute, Farmington Hills, Michigan, 2008
25. A database for investigating NZS3101 structural wall provisions
26. Behaviour of composite joints with concrete encased CFST columns under cyclic loading: Experiments10.1016/j.engstruct.2013.11.030 ↗
27. Experimental study on the seismic performance of shear walls under varied axial compression ratios
28. Experimental evaluation of seismic performance of squat RC structural walls with limited ductility reinforcing details10.1080/13632469.2014.962669 ↗
29. Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns10.1016/j.engstruct.2009.08.012 ↗
30. Residual capacity of corroded reinforcing bars10.1680/macr.2005.57.3.135 ↗
31. Effect of corrosion on ductility of reinforcing bars10.1680/macr.2005.57.7.407 ↗
32. Flexural drift capacity of reinforced concrete wall with limited confinement
33. ACI 318–99 provisions for seismic design of structural walls
34. Effect of axial loads in the seismic behavior of reinforced concrete walls with unconfined wall boundaries10.1016/j.engstruct.2014.04.047 ↗
35. Reinforcement slip in reinforced concrete columns
36. Axial and lateral stress-strain model for FRP confined concrete10.1016/j.engstruct.2015.04.046 ↗
37. Modelling of rectangular RC columns strengthened with FRP10.1016/S0958-9465(02)00017-3 ↗
38. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
39. Cover cracking as a function of rebar corrosion. II: numerical model10.1007/BF02472864 ↗
40. Prediction of strength and drift capacity of corroded reinforced concrete columns10.1016/j.conbuildmat.2016.04.048 ↗
41. Xiang · 2007
42. Analytical model for predicting shear strength of squat walls10.1061/(ASCE)0733-9445(2001)127:1(43) ↗
43. Shear strength of squat walls: a strut-and-tie model and closed-form design formula10.1016/j.engstruct.2014.11.027 ↗
44. Park · 1975
45. Strut-and-tie model for a reinforced concrete wall strengthened with carbon fibre-reinforced polymers10.1016/j.compstruct.2015.03.024 ↗
46. Experimental investigations on reinforced concrete shear walls strengthened with basalt fiber-reinforced polymers under cyclic load10.1016/j.conbuildmat.2016.12.102 ↗