journal article·2019-07

Synthesis of alkaline cements based on fly ash and metallurgic slag: Optimisation of the SiO2/Al2O3 and Na2O/SiO2 molar ratios using the response surface methodology

Jhonathan F. Rivera, Nuno Cristelo, Ana Fernández-Jiménez, Ruby Mejía de Gutiérrez

Publisher page

Abstract

During the present work, different binders were synthetized by alkaline activation of fly ash (FA) and a mixture of 75% fly ash and 25% metallurgical slag (FASLG). Two different curing periods, of 7 and 28 days, were considered. A Variance Analysis (ANOVA), conducted to assess the effectiveness of the Response Surface Methodology that was used to structure the study, revealed that this was capable to predict, with satisfactory precision, the maximum compression strength values of the pastes considered. By optimising the independent variables, defined as the SiO2/Al2O3 and Na2O/SiO2 molar ratios, 28-day uniaxial compression strength (UCS) values of 44.3 MPa and 28.5 MPa were predicted, for the FA28 and FASLG28, respectively. The experimental results showed UCS values of FA28 = 41.5 MPa and FASLG28 = 22.1 MPa, confirming the validity of each model. R-square values of 85.76% (FA28) and 85.48% (FASLG28) are an effective measure of the experimental variability associated with the estimation of new observations, which can be further reduced if more variables are controlled and included in the model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Leachability of elements in alkaline and acidic coal fly ash samples during batch.pdf10.1016/j.fuel.2012.06.013 ↗
2. Fly ash-based geopolymers containing added silicate waste. A review10.1016/j.ceramint.2017.07.221 ↗
3. Fly ash-based geopolymer: clean production, properties and applications10.1016/j.jclepro.2016.03.019 ↗
4. Life-cycle environmental and cost impacts of reusing fly ash10.1016/j.resconrec.2016.07.001 ↗
5. D.C. Montgomery, Diseño y analisis de experimentos. Montgomery 2da edición – copia.pdf, Segunda ed, Limusa Wiley, 2004.
6. ASTM C618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM Int. Annu. B. Stand. (2012) 1–5.
7. Statistical study of curing conditions in alkali activation of mine tailings10.1680/jenge.18.00013 ↗
8. Montgomery · 2014
9. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
10. Medium-term phase stability of Na2O-Al2O3-SiO2-H2O geopolymer systems10.1016/j.cemconres.2007.10.003 ↗
11. The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers10.1016/j.cemconcomp.2011.03.006 ↗
12. Alkali-activated fly ash. Relationship between mechanical strength gains and initial ash chemistry10.3989/mc.2008.v58.i291.101 ↗
13. Alkali activation of fly ash. Part III: effect of curing conditions on reaction and its graphical description10.1016/j.fuel.2010.03.051 ↗
14. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
15. Quantitative and qualitative assessment of the amorphous phase of a Class F fly ash dissolved during alkali activation reactions – Effect of mechanical activation, solution concentration and temperature10.1016/j.compositesb.2016.08.001 ↗
16. Effect of relative humidity on the reaction products of alkali activated fly ash10.1016/j.jeurceramsoc.2011.11.036 ↗
17. Effects SiO2/Na2O molar ratio on mechanical properties and the microstructure of nano-SiO2 metakaolin-based geopolymers10.1016/j.conbuildmat.2013.12.003 ↗
18. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers10.1016/j.colsurfa.2006.12.064 ↗
19. Alkali activation of fly ash: effect of the SiO2/Na2O ratio part1 FTIR study10.1016/j.micromeso.2007.02.055 ↗
20. An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash10.1016/j.cemconres.2007.01.013 ↗
21. Alkali activation of fly ashes. Part 1: effect of curing conditions on the carbonation of the reaction products10.1016/j.fuel.2005.03.030 ↗
22. Sustainable alkali activated materials: Precursor and activator derived from industrial wastes10.1016/j.jclepro.2017.06.151 ↗
23. Stabilisation of construction and demolition waste with a high fines content using alkali activated fly ash10.1016/j.conbuildmat.2018.03.057 ↗
24. Alkali-activated fly ash/slag cement Strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
25. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes10.1016/S0958-9465(02)00059-8 ↗
26. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O10.1016/j.cemconres.2011.05.006 ↗
27. Effect of calcium additions on N-A-S-H cementitious gels10.1111/j.1551-2916.2010.03668.x ↗
28. Response surface methodology for optimization of stabilizer dosage rates of marginal sand stabilized with Sludge Ash and fiber based on UCS performances10.1007/s12205-016-0724-x ↗
29. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
30. Hydration of alkali-activated ground granulated blast furnace slag10.1023/A:1004742027117 ↗
31. Waste glass as partial mineral precursor in alkali-activated slag/fly ash system10.1016/j.cemconres.2017.08.012 ↗
32. Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes10.1016/j.conbuildmat.2017.12.005 ↗
33. “Metakaolin-slag-clinker blends”. The role of Na+ or K+ as alkaline activators of theses ternary blends10.1111/jace.12272 ↗
34. Opc-fly ash cementitious systems: Study of gel binders produced during alkaline hydration10.1007/s10853-006-0585-7 ↗
35. Activation of metakaolin/slag blends using alkaline solutions based on chemically modified silica fume and rice husk ash10.1007/s12649-011-9093-3 ↗