A green drying powder inorganic coating based on geopolymer technology
Source abstract
Abstract
Abstract A geopolymer-based drying powder decorative coating was successfully prepared from metakaolin and solid type water glass by using simple powder mixing process, and the coating was successfully applied in engineering. The compressive strength and rheological performances of coating were studied. To improve the coating anti-cracking performance, the quartz sand and polycondensed aluminum phosphate (PAP) were applied and studied. The experiment results showed that water glass and water content significantly influenced the viscosity and compressive strength of drying powder coating, 3 wt% PAP improved the 3 d compressive strength from 23 to 29 MPa and prolonged surface drying time from 0.6 to 3 h, no crack in 500 μm thickness coating including quartz sand. The coating performances, including surface drying time, hardness, water resistance, and scrub resistance, were systematically tested based on the Chinese construction coating standards. The optimal coating formula (WG/MK = 0.8, W/P = 0.5, PAP = 3 wt%) was obtained for a coating that has excellent properties of high strength, artificial aging resistance, high temperature resistance, good workability, etc. The coating has good prospects of development and application due to its outstanding advantages, low manufacturing cost, simple manufacturing technology, environment friendly, etc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. New report published on global paint and coatings industry, Focus on Powder Coatings, 11 (2017) 7.10.1016/j.fopow.2017.10.034 ↗
2. Preparation of green cardanol-based expoxy and hardener as primer coating for petroleum and gas steel in marine environment10.1016/j.porgcoat.2017.06.002 ↗
3. Eco-friendly polyurethane coatings from cottonseed and karanja oil10.1016/j.porgcoat.2015.05.014 ↗
4. Waterborne vegetable oil epoxy coatings: Preparation and characterization10.1016/j.porgcoat.2012.05.001 ↗
5. Current advances of VOCs degradation by bioelectrochemical system: a review10.1016/j.cej.2017.11.014 ↗
6. VOCs characteristics and their relation with rheological properties of base and modified bitumens at different temperatures10.1016/j.conbuildmat.2017.12.158 ↗
7. Environmentally friendly intumescent coatings formulated with vegetable compounds10.1016/j.porgcoat.2017.08.007 ↗
8. Effect of organo-montmorillonite nanoclay on VOCs inhibition of Bitumen10.1016/j.conbuildmat.2017.04.040 ↗
9. Novel environment friendly inorganic red pigments based on attapulgite10.1016/j.powtec.2017.03.044 ↗
10. Deposition of colored inorganic coating layers on lamellar sericite surface and the pigmentary performances10.1016/j.powtec.2011.07.025 ↗
11. Geopolymer: inorganic polymeric new materials10.1007/BF01912193 ↗
12. Sodium silicate-free geopolymers as coating materials: effects of Na/Al and water/solid ratios on adhesion strength10.1016/j.ceramint.2014.10.099 ↗
13. Geopolymer coating of bacteria-containing granules for use in self-healing concrete10.1016/j.proeng.2015.01.193 ↗
14. Research status and development prospect of mineral polymer materials
15. Recent developments on inorganic polymers synthesis and applications10.1016/j.ceramint.2016.07.027 ↗
16. Reprint of Hot-pressure forming process of PVC/geopolymer composite materials10.1016/j.clay.2013.02.010 ↗
17. Effects of the metakaolin-based geopolymer on high temperature performances of geopolymer/PVC composite materials10.1016/j.clay.2015.07.008 ↗
18. Preparation and characterization of a reflective and heat insulative coating based on geopolymers10.1016/j.enbuild.2014.11.028 ↗
19. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
20. A novel surface waterproof geopolymer derived from metakaolin by hydrophobic modification10.1016/j.matlet.2015.11.006 ↗
21. Potential application of geopolymers as protection coatings for marine concrete:Ⅰ.basic properties10.1016/j.clay.2010.01.014 ↗
22. Potential application of geopolymers as protection coatings for marine concrete:Ⅱ.microstructure and anticorrosion10.1016/j.clay.2010.04.024 ↗
23. Potential application of geopolymers as protection coatings for marine concrete: III filed experiment10.1016/j.clay.2012.05.008 ↗
24. Sodium silicate-free geopolymers as coating materials: Effects of Na/Al and water/solid ratios on adhesion strength10.1016/j.ceramint.2014.10.099 ↗
25. Improving the durability of pozzolan concrete using alkaline solution and geopolymer coating10.1016/j.proeng.2015.11.121 ↗
26. Feasibility of producing geopolymers from two different Tunisian clays before and after calcination at various temperature10.1016/j.clay.2013.12.006 ↗
27. Addition of low reactive clay into metakaolin-based geopolymer formulation: synthesis, existence domains and properties10.1016/j.powtec.2015.11.012 ↗
28. Effect of the addition of ammonium molybdate on metakaolin-based geopolymer formation: shrinkage and crystallization10.1016/j.powtec.2015.02.012 ↗
29. Feasibility of aluminosilicate compounds from various raw materials: Chemical reactivity and mechanical properties10.1016/j.powtec.2016.06.001 ↗
30. High strength geopolymer binder based on waste-glass power10.1016/j.apt.2016.09.034 ↗
31. Early-age hydration characteristics of composite binder containing iron tailing powder10.1016/j.powtec.2017.04.022 ↗
32. Influence of the initial water content in flash calcined metakaolin-based geopolymer10.1016/j.conbuildmat.2018.12.201 ↗
33. Water content and porosity effect on dydrogen radiolytic yields of geopolymers10.1016/j.jnucmat.2017.07.005 ↗
34. Aluminum phosphate sealed alumina coating: characterization of microstructure
35. Chemically bonded phosphate ceramics-a novel class of geopolymers
36. Rheology of geopolymer by DOE approach10.1016/j.conbuildmat.2012.04.122 ↗
37. Effect of superplasticiser on workability enhancement of Class F and Class C fly ash-based geopolymers10.1016/j.conbuildmat.2016.06.067 ↗
38. Influence of kind and added timing of organic admixture on the composition, structure and property of fresh cement paste10.1016/0008-8846(95)00021-6 ↗
39. Roussel · 2011
40. Geopolymerisation kinetics. 2. Reaction kinetics modelling10.1016/j.ces.2007.01.028 ↗
41. Evaluation of tension-stiffening, crack, spacing and crack width of geopolymer concretes10.1016/j.conbuildmat.2017.11.085 ↗
42. Calcium carbonate efflorescence on Portland cement and building materials10.1016/S0008-8846(02)00937-7 ↗
43. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗