A novel fluid for use in oil and gas well construction to prevent the oil and gas leak from the wellbore
Source abstract
Abstract
Abstract This paper proposed a novel and efficient fluid for use in oil and gas well of deep-water weakly consolidated formation to prevent the oil and gas leak from the wellbore. The proper placement techniques are suggested to make the annulus and formation consolidated at the same time. The evaluation of compressive strength and thickening time of cementing fluid illustrated that the cementing fluid is suitable to use as oil well cement and formation curing agent. The optimal parameter of grouting pressure, grouting time, curing time, water/solid ratio and undrained shear strength of formation are proposed by depth of penetration, compressive strength and shear bonding strength tests. The reaction mechanism and solidification pattern of cementing fluid are revealed. After the operation of cementing fluid, the strength transition zone formed in the adjacent area of wellbore. Thus, the bonding strength of cement-formation interface was enhanced, and the leakage of oil and gas can be prevented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Drilling and Well Engineering · Concrete and Cement Materials Research · Oil and Gas Production Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A novel and efficient epoxy/chitosan cement slurry for use in severe acidic environments of oil wells-structural characterization and kinetic modeling10.1016/j.jhazmat.2012.01.068 ↗
2. Scientific American, How BP's Blowout Ranks among Top 5 Oil Spills in 1 Graphic. https://www.scientificamerican.com/article/how-bp-s-blowout-ranks-among-top-5-oil-spills-in-1-graphic/ (accessed 20 April 2015).
3. H2S-CO2 mixture corrosion-resistant Fe2O3-amended wellbore cement for sour gas storage and production wells10.1016/j.conbuildmat.2018.08.120 ↗
4. Effects of plasma-treated rock asphalt on the mechanical properties and microstructure of oil-well cement10.1016/j.conbuildmat.2018.07.133 ↗
5. A review of oil well cement alteration in CO2-rich environments10.1016/j.conbuildmat.2018.07.250 ↗
6. Do chlorides qualify as accelerators for the cement of deepwater oil wells at low temperature?10.1016/j.conbuildmat.2016.12.089 ↗
7. Ultra deep water cementing, challenges and solutions
8. Key factors in managed pressure cementing for deep water
9. New chemical systems and placement methods to stabilize and seal deepwater shallow-water flow zones
10. Prediction model of shallow geological hazards in Lingshui 17-2 deepwater based on laboratory experiment and a hybrid computational approach
11. Microscale characterization of field and laboratory foamed cement by use of X-ray microcomputed tomography10.2118/180278-PA ↗
12. Design and performance evaluation of a unique deepwater cement slurry
13. Field application for quick-setting cement
14. Comparative study on cementation of cement-mudcake interface with and without mud-cake-solidification-agents application in oil & gas wells10.1016/j.petrol.2016.05.014 ↗
15. Influence of mud cake solidification agents on thickening time of oil well cement and its solution10.1016/j.conbuildmat.2017.07.128 ↗
16. Dynamic modeling of the formation damage and mud cake deposition using filtration theories coupled with SEM image processing10.1016/j.jngse.2017.02.047 ↗
17. Properties of oil well cement with high dosage of metakaolin10.1016/j.conbuildmat.2016.02.173 ↗
18. Yang · 2016
19. Experiments on integrated solidification and cementation of the cement-formation interface using the Mud Cake to Agglomerated Cake (MTA) method10.1016/S1876-3804(10)60028-6 ↗
20. Cement and clay grouting of foundations10.1061/JSFEAQ.0000099 ↗
21. Utilization of alkali-activated slag based composite in deepwater oil well cementing10.1016/j.conbuildmat.2018.07.068 ↗
22. Effects of epoxy resin on ground-granulated blast furnace slag stabilized marine sediments10.1039/C7RA06460H ↗
23. An experimental study on the relationship between localised zones and borehole instability in poorly cemented sands10.1016/j.petrol.2015.08.009 ↗
24. Shear failure analysis of a shallow depth unsupported borehole drilled through poorly cemented granular rock10.1016/j.enggeo.2014.10.003 ↗
25. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
26. Effects of epoxy resin on the mechanical performance and thickening properties of geopolymer cured at low temperature10.1016/j.matdes.2016.07.003 ↗
27. Novel hybrid organic-geopolymer materials10.1016/j.clay.2012.11.001 ↗
28. Fire resistant melamine based organic-geopolymer hybrid composites10.1016/j.cemconcomp.2015.03.007 ↗
29. Analysis of strength development in soft clay stabilized with cement-based stabilizer10.1016/j.conbuildmat.2014.08.087 ↗