journal article·2019-11

Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology

Bitrus Emmanuel Achara, Bashar S. Mohammed, M.S. Liew

Publisher page

Abstract

Abstract This paper analyses the bond behaviour of steel reinforcement bars in the matrix of nano-silica (NS)-modified self-consolidating engineered cementitious composites (SC-ECC). Presented first is the results of pull-out tests performed on three different diameters (12 mm, 16 mm, 20 mm) sizes of reinforcing steel bar embedded in the matrix. Subsequently, the results of the experiment are used in identifying the bond-slip relationship which explains the interactions between steel bars and matrix. A response surface methodology is applied to develop predictive models which are used to perform multi-objective optimization on bond-slip properties such as bond energy, bond slip and bond strength. Lastly, the experimental and predicted results obtained demonstrate that the developed models are suitable for the interpretation of the bond behaviour of steel bars embedded in the NS-modified cementitious matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Proposed classification of HPFRC composites based on their tensile response10.1617/s11527-006-9103-2 ↗
2. Tailoring engineered cementitious composites for impact resistance10.1016/j.cemconres.2012.04.006 ↗
3. A strain-hardening cementitious composites with the tensile capacity up to 8%10.1016/j.conbuildmat.2017.01.060 ↗
4. Longitudinal shear resistance of PVA-ECC composite slabs10.1016/j.istruc.2015.12.003 ↗
5. Application of ECC for bridge deck link slabs
6. Application of ECC for bridge deck link slabs10.1617/s11527-009-9544-5 ↗
7. Seismic performance of multisimple-span bridges retrofitted with link slabs10.1061/(ASCE)1084-0702(2002)7:2(85) ↗
8. Application of Engineered Cementitious Composites (ECC) in interior beam–column connections for enhanced seismic resistance10.1016/j.engstruct.2014.03.026 ↗
9. Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer10.2174/1874149501711010638 ↗
10. Structural behavior of RC engineered cementitious composite (ECC) exterior beam–column joints under reversed cyclic loading10.1016/j.conbuildmat.2016.01.001 ↗
11. Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers10.1016/j.conbuildmat.2014.10.036 ↗
12. On engineered cementitious composites (ECC)10.3151/jact.1.215 ↗
13. Experimental investigation on pull-out strength of hybrid reinforcement of fibre in rubberized cementitious composites
14. Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members10.1617/s11527-014-0475-4 ↗
15. Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar10.1016/j.conbuildmat.2014.11.037 ↗
16. Shrinkage of internal cured high strength engineered cementitious composite with pre-wetted sand-like zeolite10.1016/j.conbuildmat.2016.12.182 ↗
17. Nano-core effect in nano-engineered cementitious composites10.1016/j.compositesa.2017.01.008 ↗
18. Bond behaviour of deformed steel bars embedded in recycled aggregate concrete10.1016/j.conbuildmat.2013.08.031 ↗
19. Factors affecting bond development between Ultra High Performance Concrete (UHPC) and steel bar reinforcement10.1016/j.conbuildmat.2017.03.091 ↗
20. Development of straight reinforcing bars in tension
21. Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete10.1016/j.conbuildmat.2013.09.032 ↗
22. Bond behavior between steel bar and recycled aggregate concrete after freeze–thaw cycles10.1016/j.coldregions.2015.06.008 ↗
23. The performance of high fluidity concrete for normal strength structures10.1016/j.conbuildmat.2016.12.042 ↗
24. Mechanical behaviour of self-compacting concrete made with recovery filler from hot-mix asphalt plants10.1016/j.conbuildmat.2016.11.063 ↗
25. Properties of nano-silica-modified self-compacting engineered cementitious composites10.1016/j.jclepro.2017.06.137 ↗
26. S. EFNARC, Guidelines for self-compacting concrete, EFNARC, UK, 2002, pp. 1–32 .
27. Bond of high-strength concrete under monotonic pull-out loading10.1680/macr.2004.56.9.545 ↗
28. Experimental and analytical investigation on bond-slip behaviour of deformed bars embedded in engineered cementitious composites10.1016/j.conbuildmat.2016.10.036 ↗
29. Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete10.1016/j.conbuildmat.2013.08.035 ↗
30. Fiber pullout behavior of HPFRCC: effects of matrix strength and fiber type10.1016/j.compstruct.2017.04.064 ↗
31. Engineered cementitious composites with high-volume fly ash
32. Nano-modification to improve the ductility of cementitious composites10.1016/j.cemconres.2015.05.026 ↗
33. Bond between powder type self-compacting concrete and steel reinforcement10.1016/j.conbuildmat.2012.12.029 ↗
34. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
35. A. Committee, Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03), American Concrete Institute, Detroit, Michigan, US, 2003, p. 49.
36. Bond-slip responses of stainless reinforcing bars in grouted ducts10.1016/j.engstruct.2017.03.049 ↗
37. Tension stiffening in reinforced high performance fiber reinforced cement-based composites10.1016/j.cemconcomp.2014.03.004 ↗
38. Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete10.1016/j.conbuildmat.2007.11.015 ↗
39. Hybrid fibre rubberized ecc optimization for modulus of elasticity
40. Optimisation of steel fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
41. Optimization techniques for the design of high-performance fibre-reinforced concrete10.1007/s001580050165 ↗
42. Study on compatibility of cement–superplasticiser assisted by multicriteria statistical optimisation10.1016/j.jmatprotec.2004.03.020 ↗
43. Data mining based optimization of test cases to enhance the reliability of the testing
44. V.C. Khed, B.S. Mohammed, M.F. Nuruddin, Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC, in: IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2018, vol. 140, no. 1, p. 012137.10.1088/1755-1315/140/1/012137 ↗
45. Fracture and fatigue of natural fiber-reinforced cementitious composites10.1016/j.cemconcomp.2009.02.006 ↗
46. Concrete made with hybrid blends of crumb rubber and metakaolin: optimization using response surface method10.1016/j.conbuildmat.2016.06.047 ↗
47. Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method10.1016/j.compositesb.2014.01.017 ↗
48. Formulating and optimising the compressive strength of controlled low-strength materials containing mine tailings by mixture design and response surface methods10.1016/j.mineng.2013.07.007 ↗
49. Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method10.1016/j.matdes.2013.06.034 ↗
50. Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis10.1016/j.conbuildmat.2014.12.010 ↗
51. Multi-response optimization of post-fire residual compressive strength of high performance concrete10.1016/j.conbuildmat.2012.08.048 ↗
52. Optimized waste tea activated carbon for adsorption of Methylene Blue and Acid Blue 29 dyes using response surface methodology10.1016/j.cej.2011.09.100 ↗
53. Optimization of hybrid fibres in engineered cementitious composites10.1016/j.conbuildmat.2018.08.188 ↗
54. RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers10.1016/j.conbuildmat.2014.05.064 ↗
55. Montgomery · 2017
56. Simultaneous optimization of several response variables10.1080/00224065.1980.11980968 ↗
57. Mix design and characteristics evaluation of an eco-friendly Ultra-High Performance Concrete incorporating recycled coral based materials