journal article·2019-11

Water vapor diffusivity of engineered wood: Effect of temperature and moisture content

A.A. Chiniforush, H. Valipour, A. Akbarnezhad

Publisher page

Abstract

Abstract This paper investigates the effects of the glue line, moisture content, and temperature on diffusion coefficients of engineered wood products. The diffusion coefficient were measured in three orthogonal directions for glued laminated timber (Glulam) made of Blackbutt (Eucalyptus pilularis), Pacific Teak (Tectona grandis), Tasmanian Oak (Eucalyptus regnans/obliqua/delegatensis), Radiata Pine (Pinus radiata), Slash Pine (Pinus elliottii), Laminated Veneer Lumber (LVL) made of Radiata Pine, and Cross Laminated Timber (CLT) made of Norwegian Spruce (Picea abies). Experiments were conducted on specimens with and without glue line at four different temperatures, i.e. 15, 25, 35, and 45 °C and three different relative humidity gradients. Adsorption isotherms were obtained, and analytical equations were fitted to the experimental data to determine the diffusion coefficient of wood as a function of temperature and moisture content. The diffusion coefficient showed a strong dependency on the temperature and moisture content, highlighting the importance of accounting for these factors in modelling of moisture transport and analysis of drying stresses, distortion and warping, as well as long-term serviceability analysis of the timber elements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Bamboo properties and applications · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Wood-based building materials and atmospheric carbon emissions10.1016/S1462-9011(99)00038-6 ↗
2. Energy implications of using steel-timber composite (STC) elements in buildings10.1016/j.enbuild.2018.07.038 ↗
3. Skaar · 1988
4. Hygroexpansion in wood
5. Eckelman · 2000
6. R.J. Ross, Wood handbook : wood as an engineering material, Forest Products Laboratory, General Technical Report FPL- GTR-190, Madison, WI : U.S., 2010.
7. Moisture and temperature induced swelling/shrinkage of softwood and hardwood glulam and LVL: An experimental study10.1016/j.conbuildmat.2019.02.114 ↗
8. T. Gereke, Moisture-induced stresses in cross-laminated wood panels (Doctoral thesis), (2009) 193. doi:10.3929/ethz-a-005898668.
9. Hygroscopic swelling and shrinkage of latewood cell wall micropillars reveal ultrastructural anisotropy10.1098/rsif.2014.0126 ↗
10. Computational up-scaling of anisotropic swelling and mechanical behavior of hierarchical cellular materials10.1016/j.compscitech.2012.02.001 ↗
11. A 3D transient nonlinear modelling of coupled heat, mass and deformation fields in anisotropic material10.1016/j.ijheatmasstransfer.2012.04.009 ↗
12. A 3-D version of TransPore: a comprehensive heat and mass transfer computational model for simulating the drying of porous media10.1016/S0017-9310(99)00098-8 ↗
13. Heat and mass transfer in wood during drying10.1016/0017-9310(85)90141-3 ↗
14. Some aspects of the modelling of wood chips drying in superheated steam10.1016/S0017-9310(96)00340-7 ↗
15. Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels10.1016/j.conbuildmat.2018.01.092 ↗
16. An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200–260 °C10.1016/j.ijheatmasstransfer.2009.10.020 ↗
17. Combined bound water and water vapour diffusion of Norway spruce and European beech in and between the principal anatomical directions10.1515/HF.2011.091 ↗
18. Thermal and moisture flux in soft fibreboards10.1007/s00107-010-0498-7 ↗
19. Thermal conductivity and water vapour transmission properties of wood-based materials10.1007/s00107-008-0304-y ↗
20. Sonderegger · 2011
21. Modelling moisture-related mechanical properties of wood Part I: properties of the wood constituents10.1007/BF00390012 ↗
22. Moisture-related mechanical properties of softwood: 3D micromechanical modeling10.1016/j.commatsci.2009.03.008 ↗
23. Orthotropic hygric and mechanical material properties of oak wood10.1080/17480272.2014.941930 ↗
24. Moisture-dependent orthotropic elasticity of beech wood10.1007/s00226-011-0449-4 ↗
25. Moisture-dependent elastic and strength anisotropy of European beech wood in tension10.1007/s10853-012-6534-8 ↗
26. Three-dimensional elastic behaviour of common yew and Norway spruce10.1007/s00226-008-0192-7 ↗
27. Long-term behaviour of steel-timber composite (STC) shear connections10.1016/j.engstruct.2019.109356 ↗
28. A.A. Chiniforush, A. Akbarnezhad, H.R. Valipour, M. Bradford, Long-term behavior of steel-CLT connections, in: World Conf. Timber Eng., Seoul, Republic of Korea, 2018.
29. A.A. Chiniforush, A. Akbarnezhad, P. Thakore, A. Ataei, Long-Term Tensile Behaviour of Engineered Wood in Parallel to Grain Direction, in: World Conf. Timber Eng., Seoul, Republic of Korea, 2018.
30. Experimental and analytical study of the mechanical behavior of heterogeneous glulam–UHPFRC beams assembled by bonding: short- and long-term investigations10.1016/j.conbuildmat.2015.09.022 ↗
31. Long-term behavior of wood-concrete composite floor/deck systems with shear key connection detail10.1061/(ASCE)0733-9445(2007)133:9(1307) ↗
32. Time-dependent behaviour of timber lightweight concrete composite floors10.1016/j.engstruct.2010.09.007 ↗
33. Steel-timber composite (STC) beams: numerical simulation of long-term behaviour10.1002/cepa.250 ↗
34. Characterizing water sorption and diffusion properties of wood/plastic composites as a function of formulation design10.1016/j.conbuildmat.2016.12.120 ↗
35. Moisture penetration in oak during sinusoidal humidity fluctuations studied by NMR10.1016/j.conbuildmat.2018.01.133 ↗
36. Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling10.1016/j.conbuildmat.2017.12.212 ↗
37. Water vapour diffusion resistance factor of Phyllostachys edulis (Moso bamboo)10.1016/j.conbuildmat.2017.02.156 ↗
38. Characterization of hygrothermal properties of wood-based products – Impact of moisture content and temperature10.1016/j.conbuildmat.2014.04.014 ↗
39. A Fickian model for temperature-dependent sorption hysteresis in hygrothermal modeling of wood materials10.1016/j.ijheatmasstransfer.2016.04.057 ↗
40. Time-dependent behaviour of timber-concrete composite members: numerical verification, sensitivity and influence of material properties10.1016/j.conbuildmat.2014.05.079 ↗
41. Time · 1998
42. Some aspects of moisture sorption dynamics in wood
43. Wadsö · 1993
44. Siau · 2012
45. American Society for Testing and Materials, ASTM E96/E96M: Standard test methods for water vapor transmission of materials, ASTM International, West Conshohocken, PA, USA, 2013.
46. Masked edge effects when measuring diffusion coefficients with the cup method10.1002/pen.760341007 ↗
47. Uber einige meteorologische Begriffe
48. Monteith · 2007
49. Joy · 1963
50. Surface mass transfer coefficients for wood10.1080/07373939308916897 ↗
51. An investigation of the external and internal resistance to moisture diffusion in wood10.1007/BF00351396 ↗
52. The effective diffusion coefficient and mass transfer coefficient of nordic softwoods as calculated from direct drying experiments10.1515/HF.1999.088 ↗
53. Evaluation of parameter values for a high-temperature drying simulation model using direct drying experiments10.1080/07373939708917288 ↗
54. An irreversible thermodynamics model for unsteady-state nonisothermal moisture diffusion in wood10.1007/BF00195282 ↗
55. Internal mass transfer coefficient during drying of softwood (Pinus elliottii Engelm.) boards10.1007/s00226-008-0223-4 ↗
56. Temperature effect on diffusion coefficient in drying wood
57. An optimization technique to determine red oak surface and internal moisture transfer coefficients during drying
58. Stamm · 1964
59. J.F. Siau, Wood: Influence of moisture on physical properties, Dept. of Wood Science and Forest Products, Virginia Polytechnic Institute and State University, 1995.
60. American Society for Testing and Materials, ASTM E104 · 2012
61. Humidity control in the laboratory using salt solutions-a review10.1002/jctb.5010170901 ↗
62. American Society for Testing and Materials, ASTM C731-15 · 2015
63. International Organization for Standardization, ISO 13061-1: Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 1: Determination of moisture content for physical and mechanical tests, Geneva, Switzerland, 2014.
64. International Organization for Standardization, ISO 13061-2: Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 2: Determination of density for physical and mechanical tests, Geneva, Switzerland, 2014.
65. International Organization for Standardization, ISO 13061-14: Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 14: Determination of volumetric shrinkage, Geneva, Switzerland, 2016.
66. Boland · 2006
67. A Unified moisture sorption-desorption isotherm for engineering wood10.1016/j.conbuildmat.2019.02.114 ↗
68. Haque · 2006
69. Walker · 2006
70. Measurement and evaluation of moisture transport coefficients during drying of wood10.1515/hfsg.1997.51.4.372 ↗
71. Mass transfer in wood: identification of structural parameters from diffusivity and permeability measurements10.1615/JPorMedia.v13.i11.80 ↗
72. Mass transfer properties (permeability and mass diffusivity) of four australian hardwood species10.15376/biores.7.3.3410-3424 ↗
73. Moisture diffusivity of building materials from water absorption measurements
74. T. Toratti, Creep of timber beams in variable environment, Ph. D. Thesis, Helsinki. (1992) 182.
75. Experimental determination of the convective heat and mass transfer coefficients for wood drying10.1007/s002260000045 ↗
76. F.F.P. Kollman, W.A. Côté, Principles of Wood Science and Technology, vol. I. Solid Wood, 1984.
77. Diffusivity and surface emissivity in wood drying
78. Modeling the kinetics of moisture adsorption by wood10.1007/BF00353224 ↗