journal article·2020-01

Evaluation of chloride ion penetration through concrete surface electrical resistivity of field naturally degraded structures present in marine environment

Carlos Eduardo Tino Balestra, Thiago Alessi Reichert, Wagner Alessandro Pansera, Gustavo Savaris

Publisher page

Abstract

Abstract As reinforcement corrosion due to chlorides action is the main cause degradation of reinforced concrete structures in marine environment, concrete electrical resistivity has been used as a non-destructive methodology in order to evaluate the service life of these structures, since it is a simple and fast field methodology that presents confiable results. At this point, many works have been carried out in order to stablish a correlation between concrete electrical resistivity and chlorides penetration. However, observing the literature and standards about this issue it was noted significant differeces between the values presented for stablish this correlation. Furthermore, a significant part of the literature studies were conducted under controlled laboratory conditions, which can differ from the real aggressiveness that a structure is exposed. Thus, this paper presents a new proposal of range values and classes between the chlorides penetration and the concrete surface electrical resistivity, based on the analysis of real chloride profiles from structures present for more than 40 years in different marine aggressive zones under natural degradation. The results shown that standard parameters were close from the values proposed in this work; however a refinement in the range values and the insertion of new parameter classes are necessary for better evaluation of chlorides penetration in concrete structures present in marine environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Chloride-induced corrosion of steel reinforcement: mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
2. Corrosion degree effect on nominal and effective strengths of reinforcement naturally corroded10.1061/(ASCE)MT.1943-5533.0001599 ↗
3. Fuzzy logic for estimating chloride diffusion in concrete10.1680/jstbu.16.00153 ↗
4. Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams
5. Electrical Resistivity as microstructural parameter for the modelling of service life of reinforced concrete structures
6. Web-based national corrosion cost inventory system for Saudi Arabia
7. Impact of climate change on the service life of concrete structures
8. Degradation of flexural strength in reinforced concrete members caused by steel corrosion10.1016/j.conbuildmat.2013.12.101 ↗
9. Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams10.1617/s11527-012-9941-z ↗
10. Evaluation of water content gradient using a new configuration of linear array four-point probe for electrical resistivity measurement10.1016/j.cemconcomp.2017.07.020 ↗
11. Experimental investigation of the relationship between residual cross-section shapes and the ductility of corroded bars10.1016/j.conbuildmat.2014.07.059 ↗
12. Degradation relationships for the mechanical properties of corroded steel rebars10.1016/j.conbuildmat.2017.04.209 ↗
13. Nonlinear stress–strain behaviour of corrosion-damaged reinforcing bars including inelastic buckling10.1016/j.engstruct.2012.09.034 ↗
14. Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity10.1016/j.conbuildmat.2017.01.100 ↗
15. Recent durability studies on concrete structure10.1016/j.cemconres.2015.05.021 ↗
16. The effects of specimen parameters on the resistivity of concrete10.1016/j.conbuildmat.2014.08.009 ↗
17. Electrical resistivity of unsaturated concrete using different types of cement10.1016/j.conbuildmat.2015.12.168 ↗
18. Use of electrical resistivity as an indicator for durability10.1016/j.conbuildmat.2014.09.077 ↗
19. Relationship between concrete resistivity and corrosion rate – a literature review10.1016/j.cemconcomp.2013.03.019 ↗
20. Effect of chemical admixtures on concrete’s electrical resistivity10.1108/IJBPA-11-2017-0058 ↗
21. Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength10.1016/j.conbuildmat.2010.11.069 ↗
22. Effects of coarse aggregates on the electrical resistivity of Portland cement concrete10.1016/j.conbuildmat.2016.12.044 ↗
23. Effect of the interfacial transition zone on the conductivity of Portland cement mortars10.1111/j.1151-2916.2000.tb01344.x ↗
24. Modification of four point method to measure the concrete electrical resistivity in presence of reinforcing bars10.1016/j.cemconcomp.2014.07.013 ↗
25. AASHTO TP 95-14 · 2014 · 10
26. FM 5-578 · 2004 · 4
27. FHWA-KS-14-15 · 2015 · 39
28. Electrical resistivity of concrete for durability evaluation: a review10.1155/2017/8453095 ↗
29. Influence of parameters on surface resistivity of concrete10.1016/j.cemconcomp.2015.06.003 ↗
30. Chloride profile modeling contemplating the convection zone based on concrete structures present for more than 40 years in different marine aggressive zones10.1016/j.conbuildmat.2018.11.271 ↗
31. Update world map of Köppen-Geiger climate classification10.5194/hess-11-1633-2007 ↗
32. Electrochemical tehniques for measuring metallic corrosion
33. Contribution for durability studies based on chloride profiles analysis of real marine structures in different marine aggressive zones10.1016/j.conbuildmat.2019.02.067 ↗
34. C.E.T. Balestra, Analysis of chloride profile obtained from real concrete structures presente in different marine aggressive zones (Doctoral Thesis), Aeronautics Institute of Technology, São José dos Campos, São Paulo, Brazil, 2017, 247p (in Portuguese).
35. Development of laboratory equipment to obtain powdered concrete samples to determine chlorides concentration for durability studies
36. ASTM C1152 Standard Test Method for Acid-soluble Chloride in Mortar and Concrete 2012 American Society for Testing and Materials West Conshohocken 4
37. Relations between chloride determination in real concrete structures by X-ray fluorescence spectroscopy and by potentiometric titration
38. Interpretation of chloride profile from concrete exposed to tropical marine environments10.1016/S0008-8846(01)00453-7 ↗
39. Chloride profiles in two marine structures – meaning and some predictions10.1016/j.buildenv.2004.01.036 ↗
40. Effect of material and environmental parameters on chloride penetration profiles in concrete structures10.1016/j.cemconres.2006.09.005 ↗
41. Outliers labeling with boxplot procedures10.1198/016214504000001466 ↗
42. Boxplot-Based outilier detection for the location-scale family10.1080/03610918.2013.813037 ↗
43. Application of outlier mining in insider identification based on boxplot method10.1016/j.procs.2016.07.069 ↗
44. Cohen · 2008 · 618