Investigation on waterproof mechanism and micro-structure of cement mortar incorporated with silicane
Source abstract
Abstract
Abstract This paper aimed to investigate the effect of different dosages silicane on waterproof mechanism and micro-structure of control and modified cement mortar incorporated with silicane using water absorption of capillarity, crack resistance, wettability, permeability resistance and degree of hydration test. At the same time, the micro-structure mechanism of cement mortar were researched by the Scanning electron microscopy (SEM), the X-ray diffraction (XRD), the Fourier transform-infrared spectroscopy (FT-IR) and Nitrogen-absorption test. Modified cement mortar were prepared by incorporating 1%, 3% and 5% silicane into control cement mortar, respectively. The experimental results shown that for the different dosages silicone and mix designs used in this paper, the addition of silicane improved the crack resistance, contact angle and the permeability resistance while decreased the water absorption of capillarity compared with control cement mortar, which indicated that the waterproof of modified cement mortar was strengthened generally. The Non-evaporable water content was used to evaluate the degree of hydration of control modified cement paste. Experimental results illustrated that degree of hydration was restrained because of the incorporation of silicane, which could be testified using the XRD and FT-IR test. In addition, in comparison with control cement mortar, the maximum adsorption capacity and total pore volume of cement mortar were increased by the SEM and Nitrogen-absorption test, manifesting that most of pores of modified cement mortar was closed. Most importantly, the hydration and waterproof mechanism was revealed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. The rapid chemically induced corrosion of concrete sewers at high H2S concentration10.1016/j.watres.2019.06.062 ↗
2. Distribution of corrosion products at the steel-concrete interface: Influence of mill scale properties, reinforcing steel type and corrosion inducing method10.1016/j.conbuildmat.2019.116854 ↗
3. Numerical simulation of steel corrosion in chloride contaminated concrete10.1016/j.conbuildmat.2019.116745 ↗
4. Phyllite clays as raw materials replacing cement in mortars: Properties of new impermeabilizing mortars10.1016/j.conbuildmat.2019.07.081 ↗
5. The use of microfine cement to enhance the efficacy of carbon nanofibers with respect to drying shrinkage crack resistance of portland cement mortars10.1016/j.cemconcomp.2017.08.006 ↗
6. Accelerated testing of plain and epoxy-coated reinforcement in simulated seawater and chloride solutions10.1016/S0008-8846(01)00487-2 ↗
7. Activated chemicals of cementitious capillary crystalline waterproofing materials and their self-healing behaviour10.1016/j.conbuildmat.2018.12.093 ↗
8. Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive10.1016/j.conbuildmat.2012.07.093 ↗
9. Long-term performance of redispersible powders in mortars10.1016/S0008-8846(00)00498-1 ↗
10. Mechanical properties and resistance to chloride ion permeability of epoxy emulsion cement mortar reinforced by glass flake10.1016/j.conbuildmat.2017.07.162 ↗
11. Properties of polymer-modified mortars using epoxy and acrylic emulsions10.1016/j.conbuildmat.2005.08.007 ↗
12. Performance evaluation of recycled rubber waterproofing bituminous membranes for concrete bridge decks and other surfaces10.1016/j.conbuildmat.2017.01.058 ↗
13. Influence of water–cement ratio and cement content on the properties of polymer-modified mortars10.1016/S0008-8846(99)00060-5 ↗
14. A hydrophobic release agent containing SiO2-CH3 submicron-sized particles for waterproofing mortar structures10.1016/j.conbuildmat.2018.12.018 ↗
15. Application of emulsion powder in cementitious waterproof slurry
16. A review of coir fiber reinforced polymer composites10.1016/j.compositesb.2019.107305 ↗
17. Efficacy of iron-based bioproducts as surface biotreatment for earth-based plastering mortars10.1016/j.jclepro.2019.117803 ↗
18. Experimental study on mechanical and waterproof performance of lightweight foamed concrete mixed with crumb rubber10.1016/j.conbuildmat.2019.03.157 ↗
19. Estimation of water flow through cracked concrete under load
20. Steady-state and multiple cracking of short random fiber composites10.1061/(ASCE)0733-9399(1992)118:11(2246) ↗
21. Conditions for pseudo strain-hardening in fiber reinforced brittle matrix composites10.1115/1.3119767 ↗
22. Latex and rosin films as alternative waterproofing coatings for 3-layer sugarcane-bamboo-based particleboards10.1016/j.polymertesting.2019.02.026 ↗
23. Stearyl methacrylate co-polymers: towards new polymer coatings for mortars protection10.1016/j.apsusc.2019.05.097 ↗
24. Development of pseudo-ductile permanent formwork for durable concrete structures10.1617/s11527-009-9561-4 ↗
25. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
26. Incorporation super absorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC)10.1016/j.conbuildmat.2011.08.032 ↗
27. Preparation and evaluation of polymer/clay nanocomposite surface treatment for concrete durability enhancement10.1016/j.cemconcomp.2011.11.006 ↗
28. Study on silane impregnation for protection of high performance concrete10.1016/j.proeng.2011.12.456 ↗
29. Improvement in the water resistance of MAPC coatings as a function of NaCl concentration
30. Development and use of polymer-modified cement for adhesive and repair applications10.1016/j.conbuildmat.2017.12.103 ↗
31. An experimental investigation of hydration mechanism of cement with silicane10.1016/j.conbuildmat.2018.01.164 ↗
32. Improving cracking resistance of cement mortar by thermo-sentive poly N-isopropyl acrylamide (PNIPAM)gels10.1016/j.jclepro.2017.11.242 ↗
33. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
34. Modification effects of colloidal nanoSiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
35. Fabrication and mechanism of cement-based waterproof material using silicate tailing from reverse flotation10.1016/j.powtec.2017.04.029 ↗