Microstructure and mechanical properties of fibre reinforced asphalt mixtures
Source abstract
Abstract
Conventional asphalt mixtures can perform satisfactorily in most flexible pavement and airfield applications. However, during recent years the trend has been towards traffic growth, severe climate conditions, and heavier loads. This allied to durability and cost effectiveness issues, has raised the demand to improve the mechanical properties of conventional asphalt materials by means of modification. Fibres may have the potential to achieve such modification and, thereby, enhance the mechanical properties of asphalt mixtures. This paper examines the relative performance of asphalt mixture modified with different fibre types and contents against the main distress types experienced by flexible pavements. Also, fibre distribution and orientation in the asphalt mixture are explored in this paper. The scanning electronic microscope images show the difference in the microstructure among fibre types. X-ray computed tomography investigation results indicate that steel fibres are present throughout the asphalt mixture specimen. The test results show that fibres have a notable impact on the stiffness modulus and fracture toughness of asphalt mixtures at 20 °C test temperature. In addition, fibres provide slightly improved fatigue life of fibre reinforced asphalt mixtures, mainly at low strain values. Furthermore, results indicate that there is no detrimental impact of fibres on either the tensile strength or the moisture damage resistance of such mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Development of a predictive system for estimating fatigue life of asphalt mixtures using the indirect tensile test10.1061/(ASCE)TE.1943-5436.0000452 ↗
2. Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fénix and semi-circular bending tests10.1016/j.conbuildmat.2013.07.084 ↗
3. Influence of diatomite and mineral powder on thermal oxidative ageing properties of asphalt10.1155/2015/947834 ↗
4. Analysis of use of natural fibers and asphalt rubber binder in discontinuous asphalt mixtures10.1016/j.conbuildmat.2011.06.030 ↗
5. Experimental study on road performance of basalt fiber reinforced Bitumen mastics
6. Reinforcement of recycled foamed asphalt using short polypropylene fibers10.1155/2013/903236 ↗
7. Posidonia oceanica used as a new natural fibre to enhance the performance of asphalt mixtures10.1016/j.conbuildmat.2015.10.193 ↗
8. Thermo-plastic fiber’s reinforcing effect on hot-mix asphalt concrete mixture10.1016/j.conbuildmat.2014.02.038 ↗
9. Effects of fibers on the dynamic properties of asphalt mixtures10.1007/s11595-006-4733-3 ↗
10. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
11. Fatigue cracking resistance of fiber-reinforced asphalt concrete10.1177/004051750507500206 ↗
12. BS EN 1426, Bitumen and bituminous binders—determination of needle penetration, British Standard and European Committee, London, United Kingdom, 2007.
13. BS 4987-1, Coated macadam (asphalt concrete) for roads and other paved areas, Specification for constituent materials and for mixtures, British Standard, Standards Policy and Strategy Committee, London, United Kingdom, 2005.
14. BS EN 12697-35, Bituminous mixtures — test methods, Part 35: Laboratory mixing, British Standard and European Committee, London, United Kingdom, 2016.
15. BS EN 12697-33, Bituminous mixtures —test methods for hot mix asphalt, Part 33: Specimen prepared by roller compactor, British Standard and European Committee, London, United Kingdom, 2003.
16. Fatigue and deformation properties of glass fiber reinforced bituminous mixes
17. Cleven · 2000
18. C. Alvarado, E. Mahmoud, I. Abdallah, E. Masad, S. Nazarian, R. Langford, V. Tandon, J. Button, Feasibility of quantifying the role of coarse aggregate strength on resistance to load in HMA, TxDOT Project No. 0-5268 and Research Report No. 0-5268 (2007).
19. Laboratory investigation on the brucite fiber reinforced asphalt binder and asphalt concrete10.1016/j.conbuildmat.2015.02.089 ↗
20. Experimental study of fibers in stabilizing and reinforcing asphalt binder10.1016/j.fuel.2009.08.020 ↗
21. Influence of fibres on rheological properties and toughness of bituminous binder10.1016/j.conbuildmat.2017.12.146 ↗
22. Wiljanen · 2003
23. M.J. Dennis, Industrial computed tomography, General Electric, NDE System and Service, 1997.
24. Internal structure characterization of asphalt concrete using image analysis10.1061/(ASCE)0887-3801(1999)13:2(88) ↗
25. BS EN 12697-26, Bituminous mixtures: Test methods for hot mix asphalt, Part 26: Stiffness, British Standard and European Committee London, United Kingdom, 2012.
26. Draft BS, DD ABF Method for the determination of the fatigue characteristics of bituminous mixtures using indirect tensile fatigue British Standard, London, United Kingdom, 2003.
27. Practical fatigue characterization of bituminous paving mixture
28. Draft BS EN 12697-24 Bituminous mixtures – Test methods – Part 24: Resistance to fatigue Indirect tensile test on cylindrical shaped specimens, British Standard and European Standard London, United Kingdom, 2015.
29. BS EN 12697-23, Bituminous mixtures – Test methods Part 23: Determination of the indirect tensile strength of bituminous specimens British Standard and European Committee, London, United Kingdom, 2017.
30. BS EN 12697-12, Part 12: Determination of the water sensitivity of bituminous specimens, British Standard and European Committee London, United Kingdom, 2003.
31. BS EN 12697-25, Bituminous mixtures — Test methods, Part 25: Cyclic compression test, British Standard and European Committee, London, United Kingdom, 2016.
32. BS EN 12697-44, Bituminous mixtures — Test methods for hot mix asphalt, Part 44: Crack propagation by semi-circular bending test, British Standard London, United Kingdom, 2010.
33. M. van de Ven, A.d.F. Smit, R.L. Krans, Possibilities of a semi-circular bending test, Eighth International Conference on Asphalt PavementsFederal Highway Administration, 1997.
34. Evaluation and design of fiber-reinforced asphalt mixtures10.1016/j.matdes.2008.09.030 ↗
35. Investigation into the bond strength of bitumen-fibre mastic10.1016/j.conbuildmat.2018.09.084 ↗
36. Evaluation of fiber-reinforced asphalt mixtures using advanced material characterization tests10.1520/JTE102442 ↗
37. Differences in cracking resistance of asphalt mixtures due to ageing and moisture damage10.1016/j.conbuildmat.2016.02.199 ↗
38. Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures10.1061/(ASCE)0899-1561(2007)19:6(475) ↗
39. Q. Lu, J.T. Harvey, Evaluation of moisture sensitivity of hot mix asphalt by flexural beam fatigue test, Asphalt Concrete: Simulation, Modeling, and Experimental Characterization, 2006, pp. 124–133.10.1061/40825(185)13 ↗
40. R. McDaniel, H. Soleymani, A. Shah, Use of reclaimed asphalt pavement (RAP) under Superpave specifications: a regional pooled fund project, 2002.10.5703/1288284313465 ↗
41. Moisture damage evaluation of asphalt mixtures using AASHTO T283 and DC (T) fracture test
42. Fracture resistance characterization of superpave mixtures using the semi-circular bending test10.1520/JAI12264 ↗
43. Using semi circular bending test to evaluate low temperature fracture resistance for asphalt concrete10.1007/s11340-009-9303-0 ↗
44. Investigation of size effect in asphalt mixture fracture testing at low temperature10.1080/14680629.2012.657064 ↗
45. On the mixed mode I/II fracture properties of jute fiber-reinforced concrete10.1016/j.conbuildmat.2017.05.034 ↗
46. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects10.1016/j.conbuildmat.2010.03.012 ↗
47. Asphalt mixtures