journal article·2018-06

Friction performance assessment of Non-Asbestos Organic (NAO) composite-to-steel interface and Polytetrafluoroethylene (PTFE) composite-to-steel interface: Experimental evaluation and application in seismic resistant structures

Zheng Li, Minjuan He, Hanlin Dong, Zhan Shu, Xijun Wang

Publisher page

Abstract

Abstract This paper presents an experimental research program for assessing the mechanical performance of two types of friction interfaces: i.e. Non-Asbestos Organic (NAO) friction composite against steel and Polytetrafluoroethylene (PTFE) composite against steel. A shear device was designed for testing the friction interface, and the compressive force on the interface was realized by a pretension high strength bolt. Cyclic loading tests were conducted for evaluating the friction performance of the interfaces, and loading frequency, loading amplitude, and magnitude of compressive force on the interface were considered as main influencing parameters. Experimental results showed that with the same magnitude of compressive force on the interface, the sliding shear force of the PTFE-steel interface was much smaller than that of the NAO-steel interface. An average friction coefficient of 0.12 was obtained for the NAO-steel interface, while an average friction coefficient of 0.025 was obtained for the PTFE-steel interface. Both friction interfaces exhibited stable and predictable behavior. The interfaces were further utilized in a slip friction damping device developed for upgrading the seismic performance of a novel timber-steel hybrid seismic resistant structure, and analytical results revealed that both structural damage and unrecoverable deformation of the structure were significantly decreased with the application of the damping devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Tribology and Wear Analysis · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Tremblay · 1993
2. Characterization of two friction interfaces for use in seismic damper applications10.1617/s11527-008-9365-y ↗
3. Influence of steel shim hardness on the Sliding Hinge Joint performance10.1016/j.jcsr.2011.11.009 ↗
4. Experimental studies on cyclic performance of column base weak axis aligned asymmetric friction10.1016/j.jcsr.2015.05.007 ↗
5. Response of friction damped braced frames10.1061/JSDEAG.0005968 ↗
6. Disc brakes for commercial vehicles – friction of aramid fibre composites
7. Role of different metallic fillers in non-asbestos organic (NAO) friction composites for controlling sensitivity of coefficient of friction to load and speed10.1016/j.triboint.2009.12.062 ↗
8. Effects of aramid fiber concentration on the friction and wear characteristics of non-asbestos organic friction composites using standardized braking tests10.1016/j.wear.2016.03.002 ↗
9. Kim · 2007
10. Experimental analysis on friction materials for supplemental damping devices10.1016/j.conbuildmat.2014.04.092 ↗
11. Structures of molecules and crystals of fluoro-carbons10.1038/174549a0 ↗
12. Friction and wear of PTFE – a review10.1016/0043-1648(92)90039-B ↗
13. Preparation and characterization of polytetrafluoroethylene (PTFE)/Thermally Expanded Graphite (TEG) nanocomposites10.1016/j.compositesb.2017.05.046 ↗
14. Enhanced mechanical and tribological properties in polytetrafluoroethylene sulphide/polytetrafluoroethylene composites reinforced by short carbon fiber10.1016/j.compositesb.2016.01.036 ↗
15. Mechanical properties of polytetrafluoroethylene composites reinforced with graphene nanoplatelets by solid-state processing10.1016/j.compositesb.2016.03.082 ↗
16. China Machinery Industry Federation (CMIF) · 2006
17. Chinese Standard GB 50017 · 2003
18. An overview of the impacts of the 2010–2011 Canterbury earthquakes10.1016/j.ijdrr.2015.01.014 ↗
19. Research on the application of information system to damage of buildings in Wenchuan county town during the Wenchuan earthquake
20. Seismic friction base isolation performance using demolished waste in masonry housing10.1016/j.conbuildmat.2008.01.012 ↗
21. A numerical study of coupled timber walls with slip friction damping devices10.1016/j.conbuildmat.2016.05.160 ↗
22. Experimental studies on cyclic performance of column base strong axis-aligned asymmetric friction connections10.1061/(ASCE)ST.1943-541X.0001327 ↗
23. Proposed design models for the asymmetric friction connection10.1002/eqe.2520 ↗
24. Free from damage beam-to-column joints: testing and design of DST connections with friction pads10.1016/j.engstruct.2014.12.019 ↗
25. Pilot study on the experimental behavior of GFRP-steel slip-critical connections10.1016/j.compositesb.2016.10.007 ↗
26. Experimental behaviour of innovative thermal spray coating materials for FREEDAM joints10.1016/j.compositesb.2016.09.075 ↗
27. Numerical modelling of innovative DST steel joint under cyclic loading10.1016/j.acme.2017.10.008 ↗
28. Stiffness-based approach for Belleville springs use in friction sliding structural connections10.1016/j.jcsr.2017.07.009 ↗
29. Standardised friction damper bolt assemblies time-related relaxation and installed tension variability10.1016/j.jcsr.2017.10.029 ↗
30. Experimental investigation on lateral performance of timber-steel hybrid shear wall systems10.1061/(ASCE)ST.1943-541X.0000855 ↗
31. McKenna · 2000