journal article·2018-07

Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete

Manoj K. Dash, Sanjaya K. Patro

Publisher page

Abstract

Abstract The present study aims to represent the outcomes of investigation carried out to assess the use of water cooled ferrochrome slag (WCFS) as an alternative to natural sand in concrete making. Various destructive tests such as compressive strength, splitting tensile strength, flexural strength and modulus of elasticity were conducted on various concrete samples containing 0–50% of the WCFS on replacement of equal weight of natural sand. Non-destructive test like ultrasonic pulse velocity (UPV) test was conducted to compare the results of destructive tests. Rapid chloride permeability test (RCPT), acid resistance and sulphate resistance tests were addressed to access the durability of concrete containing the WCFS. Optical micro structural study was conducted to examine the microstructure of concrete with the WCFS. The WCFS is found similar to natural sand. The results indicated that there is a little decrease in strength properties of concrete due to inclusion of the WCFS but can be used up to 30% with minor scarification of strength. This little scarification may not be considered important when compared with the advantages on reuse of industrial waste and thus conservation of natural resources. Inclusion of the WCFS up to 30% has almost no negative impact on durability of concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Materials Engineering and Processing · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate10.1016/j.buildenv.2006.07.003 ↗
2. Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete10.1016/j.conbuildmat.2015.07.081 ↗
3. Use of ferrochrome ash (FCA) and lime dust in concrete preparation10.1016/j.jclepro.2016.05.042 ↗
4. Utilization of ferrochrome wastes such as ferrochrome ash and ferrochrome slag in concrete manufacturing10.1177/0734242X16654751 ↗
5. Properties of concrete pavements prepared with ferrochromium slag as concrete aggregate10.1016/j.cemconres.2004.11.019 ↗
6. Environmental and technical assessment of ferrochrome slag as concrete aggregate material10.1016/j.conbuildmat.2013.08.002 ↗
7. Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete – a review10.1016/j.ijsbe.2016.04.006 ↗
8. Capillarity of concrete incorporating waste foundry sand10.1016/j.conbuildmat.2013.05.013 ↗
9. Properties of concrete using metallurgical industrial by-products as aggregates10.1016/j.conbuildmat.2010.02.034 ↗
10. Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete10.1016/j.conbuildmat.2011.06.041 ↗
11. Comparative investigation on the influence of spent foundry sand as partial replacement of fine aggregates on the properties of two grades of concrete10.1016/j.conbuildmat.2015.03.011 ↗
12. Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates10.1016/j.conbuildmat.2013.12.051 ↗
13. Properties of concrete manufactured using steel slag10.1016/j.proeng.2014.12.229 ↗
14. Optimum content of copper slag as a fine aggregate in high strength concrete10.1016/j.matdes.2009.12.037 ↗
15. Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand10.1016/j.conbuildmat.2014.06.034 ↗
16. Strength and abrasion characteristics of ISF slag concrete10.1061/(ASCE)MT.1943-5533.0000709 ↗
17. Retardation of cement hydration caused by heavy metals present in ISF slag used as aggregate10.1016/j.cemconcomp.2008.07.005 ↗
18. Prediction of compressive strength of concrete with fly ash as sand replacement material10.1016/j.cemconcomp.2006.10.001 ↗
19. IS 455 · 1989
20. IS 2720 (Part III/Section 1) · 1980
21. IS 383 · 1970
22. IS 2386 (Part III) · 1963
23. IS 4032 · 1985
24. IS 456 · 2000
25. IS 9103 · 1999
26. IS 10262 · 1999
27. IS 1199 · 1959
28. ASTM C 192:98, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, 1998, ASTM International, West Conshohocken (PA).
29. IS 516, Methods of Tests for Strength of Concrete, 1959, Bureau of Indian Standards; New Delhi.
30. IS 5816 · 1999
31. IS 13311 (Part 1) · 1992
32. ASTM C 1202:97, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, 1997, ASTM International, West Conshohocken (PA).
33. ASTM C 267 · 2012
34. ACI 209.2R · 2008
35. Jackson · 1996
36. Sulphate attack in high-performance concrete-a review
37. Development of an acid resistant concrete-a review