Micromechanical modeling of crack-bridging relations of hybrid-fiber Strain-Hardening Cementitious Composites considering interaction between different fibers
Source abstract
Abstract
Abstract As tensile crack-bridging constitutive relations play an important role in the multiple cracking behaviors of Strain-Hardening Cementitious Composites (SHCCs), careful control of the crack-bridging relations is the key to a successful design of the materials. This study theoretically explores the crack-bridging relations of SHCCs with fixed total volume fraction (2.5%) of hybrid polyvinyl alcohol (PVA) and steel fibers. Since a large number of experiments at the single-fiber level are needed to determine the parameters for the micromechanical model, the snubbing coefficient, fiber strength reduction factor and Cook-Gordon parameter for mono-fiber composites were theoretically calibrated rather than experimentally obtained in this study. With these calibrated parameters, the crack-bridging relations of hybrid-fiber SHCCs were then modeled and compared to the test results. The superposition principle was used to address the contributions of different types of fibers, and the interaction between PVA and steel fibers was considered through the matrix micro-spalling in the modeling. The theoretically modeled crack-bridging relations of hybrid-fiber SHCCs were in good agreement with the test curves in terms of the tensile strength and the corresponding crack opening. The findings in this study provide a better understanding of fiber hybridizations in SHCCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Engineered Cementitious Composites (ECC): material, structural, and durability performance
2. Composite properties of high-strength, high-ductility concrete
3. Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECC10.1016/j.compositesb.2013.12.076 ↗
4. Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash10.1016/j.conbuildmat.2013.11.001 ↗
5. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
6. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)10.1016/j.conbuildmat.2014.12.071 ↗
7. Tensile strain hardening behavior of PVA fiber-reinforced engineered geopolymer composite10.1061/(ASCE)MT.1943-5533.0001242 ↗
8. Effect of fiber properties and matrix composition on the tensile behavior of strain-hardening cement-based composites (SHCCs) subject to impact loading10.1016/j.cemconres.2015.12.008 ↗
9. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
10. Matrix design for waterproof engineered cementitious composites (ECCs)10.1016/j.conbuildmat.2017.02.076 ↗
11. Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers10.1016/j.cemconres.2017.04.003 ↗
12. Strength improvement of strain-hardening cementitious composites with ultrahigh-volume fly ash10.1061/(ASCE)MT.1943-5533.0001987 ↗
13. High ductile behavior of a polyethylene fiber-reinforced one-part geopolymer composite: a micromechanics-based investigation10.1016/j.acme.2016.12.005 ↗
14. Tensile performance of sustainable strain-hardening cementitious composites with hybrid PVA and recycled PET fibers10.1016/j.cemconres.2018.02.013 ↗
15. Use of high strength strain-hardening cementitious composites for flexural repair of concrete structures with significant steel corrosion10.1016/j.conbuildmat.2018.02.009 ↗
16. Tensile performance and impact resistance of strain hardening cementitious composites (SHCC) with recycled fibers10.1016/j.conbuildmat.2018.03.108 ↗
17. Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar10.1016/j.engstruct.2018.05.037 ↗
18. Tensile fatigue behavior of fiber-reinforced cementitious material with high ductility: experimental study and novel P-S-N model10.1016/j.conbuildmat.2018.05.166 ↗
19. Recycling polyethylene terephthalate wastes as short fibers in strain-hardening cementitious composites (SHCC)10.1016/j.jhazmat.2018.05.046 ↗
20. Novel cement-based composites for the strengthening and repair of concrete structures10.1016/j.conbuildmat.2012.11.117 ↗
21. Applications and recommendations of high performance fiber reinforced cement composites with multiple fine cracking (HPFRCC) in Japan10.1617/s11527-009-9541-8 ↗
22. RILEM. Durability of Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC). In: Van Zijl GPAG, Wittmann FH, (eds.) RILEM State-of-the-art Report. Netherlands, RILEM, 2011.
23. Li VC. Bendable Concrete. Innovation in Construction – Hong Kong CIC Res. J. 2016(Special Issue: CIC Inavation Award): pp. 11–7.
24. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
25. Steady-state and multiple cracking of short random fiber composites
26. Micromechanics of crack bridging in fibre-reinforced concrete10.1007/BF02472808 ↗
27. Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces10.1016/S0022-5096(96)00095-6 ↗
28. Interface property and apparent strength of high-strength hydrophilic fiber in cement matrix10.1061/(ASCE)0899-1561(1998)10:1(5) ↗
29. Effect of fiber strength and fiber-matrix interface on crack bridging in cement composites
30. New micromechanics design theory for pseudostrain hardening cementitious composite
31. On interface property characterization and performance of fiber reinforced cementitious composites
32. Tensile stress-strain modeling of pseudostrain hardening cementitious composites10.1061/(ASCE)0899-1561(2000)12:2(147) ↗
33. Tensile properties of short fiber composites with fiber strength distribution10.1023/A:1017500218309 ↗
34. Prediction of ECC tensile stress-strain curves based on modified fiber bridging relations considering fiber distribution characteristics10.12989/cac.2010.7.5.455 ↗
35. Micromechanics-based fiber-bridging analysis of strain-hardening cementitious composite accounting for fiber distribution
36. A micromechanics-based fatigue dependent fiber-bridging constitutive model10.1016/j.cemconres.2016.09.017 ↗
37. Hybrid short fiber reinforcement system in concrete: a review10.1016/j.conbuildmat.2017.03.059 ↗
38. Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
39. Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash10.1016/j.conbuildmat.2006.01.002 ↗
40. Performance of hybrid-fiber ECC blast/shelter panels subjected to drop weight impact10.1061/(ASCE)0899-1561(2007)19:10(855) ↗
41. Tensile strain hardening behaviour of hybrid steel-polyethylene fibre reinforced cementitious composites10.1016/j.conbuildmat.2008.01.009 ↗
42. Impact resistance of hybrid-fiber engineered cementitious composite panels10.1016/j.compstruct.2013.01.029 ↗
43. J. Yu, C.K.Y. Leung, C. Lu, Tension and shear behavior of hybrid-fiber pseudo-ductile cementitious composites. In: Brandt A.M., Olek J., Glinicki M.A., Leung C.K.Y., Lis J., (eds.), The 11th International Symposium on Brittle Matrix Composites (BMC-11) Warsaw, Poland. 2015. pp. 161–171.
44. Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash10.1016/j.cemconcomp.2016.05.011 ↗
45. Bond and cracking behavior of lap-spliced reinforcing bars embedded in hybrid fiber reinforced strain-hardening cementitious composite (SHCC)10.1016/j.compositesb.2016.09.086 ↗
46. Properties of polyvinyl alcohol-steel hybrid fiber-reinforced composite with high-strength cement matrix10.1061/(ASCE)MT.1943-5533.0001868 ↗
47. Yu · 2017
48. Experimental determination of crack-bridging constitutive relations of hybrid-fiber strain-hardening cementitious composites using digital image processing10.1016/j.conbuildmat.2018.03.185 ↗
49. ASTM · 1975
50. Wang · 2005
51. An effective discrete model for strain hardening cementitious composites: model and concept10.1016/j.compstruc.2017.03.002 ↗
52. Modeling of high-strength FRC structural elements with spatially non-uniform fiber volume fraction10.3151/jact.13.311 ↗
53. ASTM · 2012
54. Measuring and modifying interface properties of PVA fibers in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
55. Modelling of fibre pull-out from a cement matrix10.1016/0262-5075(88)90002-4 ↗
56. Wu · 2001
57. Naaman · 1972
58. Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites10.1016/j.cemconres.2014.01.002 ↗
59. Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures10.1016/j.conbuildmat.2015.09.002 ↗
60. Simulation of the tensile stress-strain behavior of Strain Hardening Cement Composites
61. Direct assessment of tensile stress-crack opening behavior of strain hardening cementitious composites (SHCC)10.1016/j.cemconres.2012.03.006 ↗
62. J. Yu, L. Meng, C.K.Y. Leung, Pull-out Response of Single Steel Fiber Embedded in PVA Fiber Reinforced Cementitious Matrix, in: Saouma, V. Bolander, J. Landis, E. (eds.), The 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-9) 2016 USA, Berkeley, California. pp. 1–12.10.21012/FC9.021 ↗