journal article·2018-09

Effects of steel slag and silica fume additions on compressive strength and thermal properties of lime-fly ash pastes

Zhiguang Zhao, Xiaoling Qu, Fangxian Li, Jiangxiong Wei

Publisher page

Abstract

Abstract Lime-pozzolana pastes with high volumes of fly ash (FA) are widely used as masonry cement and autoclaved building materials. In this work, four sets of pastes with varying lime content from 12% to 25% were prepared and autoclaved at 180 °C for 8 h, and basic oxygen furnace steel slag (BOFS) and silica fume (SF) were added as replacements of FA in each set. The properties assessed were compressive strength, thermal properties by transient plane source method, porosity and pore size distribution by mercury intrusion porosimetry (MIP). The microstructure was investigated by means of XRD and SEM-EDS. Results show that both pore structure and microstructure of the pastes were significantly altered by variations in compositions. High lime content resulted in an increase of porosity and more capillary pores were formed, replacement of FA with BOFS coarsened the pore structure but the opposite was observed for SF. The compressive strength was closely related to pore structure and microstructure as expected. The thermal conductivity and thermal diffusivity decreased with increasing lime content and were further decreased by incorporating BOFS and SF. Only SF could effectively increase the specific heat due to the interfaces between SF particles and matrix as a thermal barrier. A random model was developed to simulate pore structure and thermal conductivity of the pastes based on the assumption of two phases (gas and solid). These achievements contribute to better understanding of the lime-pozzolana pastes and are desirable for their proper modeling and design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Activation of blended cements containing fly ash10.1016/S0008-8846(01)00526-9 ↗
2. Activation of fly ash cementitious systems in the presence of quicklime: part I. Compressive strength and pozzolanic reaction rate10.1016/j.cemconres.2003.08.008 ↗
3. Activation of fly ash cementitious systems in the presence of quicklime. Part II: nature of hydration products, porosity and microstructure development10.1016/j.cemconres.2006.09.013 ↗
4. Reactivity of dealuminated kaolin and burnt kaolin using cement kiln dust or hydrated lime as activators10.1016/j.conbuildmat.2013.06.078 ↗
5. Activation of the fly ash pozzolanic reaction by hydrothermal conditions10.1016/S0008-8846(03)00085-1 ↗
6. Hydrothermal reactions of fly ash with Ca(OH)2 and CaSO4·2H2O10.1016/S0008-8846(97)00116-6 ↗
7. Hydration characteristics of hydrothermal treated cement klin dust-sludge-silica fume pastes10.1016/j.conbuildmat.2010.11.073 ↗
8. Hydrothermal characteristics of high slag cement pastes made with and without silica sand10.1680/adcr.2012.24.1.23 ↗
9. Influence of carbon nanotubes, nanosilica and nanometakaolin on some morphological-mechanical properties of oil well cement pastes subjected to elevated water curing temperature and regular room air curing temperature10.1016/j.conbuildmat.2017.04.124 ↗
10. Partial replacement of cement by fly ash in autoclaved products-theory and practice10.1007/BF00569291 ↗
11. Thermogravimetry analysis, compressive strength and thermal conductivity tests of non-autoclaved aerated Portland cement–fly ash–silica fume concrete10.1007/s10973-015-4724-8 ↗
12. Strength of lime–fly ash compacts using different curing techniques and gypsum additive10.1617/s11527-011-9738-5 ↗
13. Lime based steam autoclaved fly ash bricks10.1016/j.conbuildmat.2006.01.005 ↗
14. Utilization potential of fly ash together with silica fume in autoclaved aerated concrete production10.1007/s12205-014-0392-7 ↗
15. Phase studies of pozzolanic stabilized calcium silicate hydrates at 180°C10.1016/j.cemconres.2004.05.021 ↗
16. Hydration characteristics of hydrothermal treated cement kiln dust–sludge–silica fume pastes10.1016/j.conbuildmat.2010.11.073 ↗
17. Activity of silica fume and dealuminated kaolin at different temperatures10.1016/S0008-8846(01)00489-6 ↗
18. Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume10.1016/j.msea.2010.01.089 ↗
19. Artificial pozzolanic cement pastes containing burnt clay with and without silica fume: physicochemical, microstructural and thermal characteristics10.1007/s10973-011-1676-5 ↗
20. Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete10.1016/j.cemconres.2004.10.011 ↗
21. Strength development, hydration reaction and pore structure of autoclaved slag cement with added silica fume10.1016/S0008-8846(96)00196-2 ↗
22. Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes10.1016/j.conbuildmat.2017.08.040 ↗
23. Thermal resistance, microstructure and mechanical properties of type I Portland cement pastes containing low-cost nanoparticles10.1007/s10973-017-6629-1 ↗
24. ASTM C1693. Standard Specification for Autoclaved Aerated Concrete (AAC), 2009.
25. ISO 22007-2. Transient plane heat source (hot disc) method, 2008.
26. Properties of hydraulic paste of basic oxygen furnace slag10.1016/j.cemconcomp.2013.09.016 ↗
27. Physico-chemical characteristics of blended cement pastes containing electric arc furnace slag with and without silica fume10.1016/j.hbrcj.2014.07.002 ↗
28. A fractal approach to determine thermal conductivity in cement pastes10.1016/j.conbuildmat.2014.10.016 ↗
29. Increasing the specific heat of cement paste by admixture surface treatments10.1016/S0008-8846(99)00080-0 ↗
30. Blended pastes of cement and lime: pore structure and capillary porosity10.1016/j.apsusc.2005.10.019 ↗
31. Variation of microstructure with carbonation in lime and blended pastes10.1016/j.apsusc.2005.09.007 ↗
32. Lime-pastes with different kneading water: pore structure and capillary porosity10.1016/j.apsusc.2005.02.145 ↗
33. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
34. Effect of some acrylate-poly(ethylene glycol) copolymers as superplasticizers on the mechanical and surface properties of portland cement pastes10.1260/0263617054353645 ↗
35. Influence of hydrothermal conditions with 200 °C and 15.5 bars on the properties of hardened HPC10.1016/j.conbuildmat.2015.03.027 ↗
36. Influence of hydrothermal curing regimes on the hydration of fiber-reinforced cement composites10.1007/s10973-013-2943-4 ↗
37. Characterization and simulation of microstructure and thermal properties of foamed concrete10.1016/j.conbuildmat.2013.06.027 ↗
38. Development of the random simulation model for estimating the effective thermal conductivity of insulation materials10.1016/j.buildenv.2014.05.033 ↗
39. Cement of high specific heat and high thermal conductivity, obtained by using silane and silica fume as admixtures10.1016/S0008-8846(00)00296-9 ↗
40. Lamellare doppelbrechung
41. A variational approach to the theory of the effective magnetic permeability of multiphase materials10.1063/1.1728579 ↗
42. Elevated-temperature thermal properties of lightweight foamed concrete10.1016/j.conbuildmat.2010.07.016 ↗
43. Effect of autoclave curing on the microstructure of pasteed cement mixture incorporating ground dune sand and ground granulated blast furnace slag10.1007/s40069-015-0104-9 ↗
44. Taylor · 1997
45. A preliminary study of autoclaved alkali-activated slag pasteed with quartz powder10.1016/j.conbuildmat.2011.12.104 ↗
46. Microstructure analyses of autoclaved ground dune sand–Portland cement paste10.1016/j.conbuildmat.2014.04.040 ↗
47. Influence of additions of coal fly ash and quartz on hydrothermal solidification of blast furnace slag10.1016/j.cemconres.2008.01.017 ↗
48. Class H cement hydration at 180 °C and high pressure in the presence of added silica10.1016/j.cemconres.2007.12.004 ↗
49. Solubility and structure of calcium silicate hydrate10.1016/j.cemconres.2004.04.034 ↗