journal article·2018-11

Three-dimensional characterization of morphology and abrasion decay laws for coarse aggregates

Haitao Ge, Aimin Sha, Zhenqiang Han, Xiaowei Xiong

Publisher page

Abstract

Abstract In order to quantitatively evaluate morphological characteristics and abrasion decay laws of coarse aggregate so that make an accurate performance evaluation for aggregates, flat-elongated index, sphericity index and specific surface area are proposed to characterize the shape properties of coarse aggregate. Limestone aggregate particles ranging in size scale of 4.75–9.5 mm, 9.5–13.2 mm, 19–26.5 mm were worn by the Los Angeles Abrasion tester respectively. Three-dimensional (3-D) laser scanner was used to obtain three-dimensional points cloud data of aggregate particles experienced 0, 500, 1000 and 2000 abrasion cycles. Afterwards, the data was processed by the software of reverse engineering based on morphology evaluation indexes, and the minimum bounding box algorithm was developed to calculate flat-elongated index, illustrating the morphological characteristics of coarse aggregate particles with different size and abrasion cycles. Test results show that: aggregates with small size have bigger quantity proportion of elongated particle; the greater the angularity of aggregates was, the faster the angular decay rate of the aggregates was; aggregate particles with small size has richer surface texture but easier to lost in abrasion process. Sphericity index increased, while specific surface area and flat-elongated index presented a downward trend as the particle size became bigger for different abrasion cycles. However, the flat-elongated index of aggregate particles with different size increased abnormally when abrasion cycles increased at 2000 abrasion cycles as the result of aggregate crushing. Besides, the sphericity and specific surface area of some 4.75 mm aggregate under 500 abrasion cycles showed an abnormal increasing compared to its 1000 abrasion cycles, which caused by inadequate abrasion under low abrasion cycles. Therefore, the indexes proposed in the study are able to characterize different aspects of coarse aggregates morphological property, and it is beneficial for the evaluation and selection of aggregates used in engineering construction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Tunneling and Rock Mechanics · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Review of advances in understanding impacts of mix composition characteristics on asphalt concrete (AC) mechanics10.1080/10298436.2011.575142 ↗
2. Influence of aggregate morphology on the mechanical performance of asphalt mixtures10.1080/14680629.2016.1138880 ↗
3. Predicting the Los Angeles abrasion loss of rock aggregates from the uniaxial compressive strength10.1016/j.matlet.2007.06.003 ↗
4. Effects of Los Angeles Abrasion test values on the strengths of laboratory-prepared Marshall specimens
5. Aggregate toughness/abrasion resistance and durability/soundness tests related to asphalt concrete performance in pavements10.3141/1638-10 ↗
6. Comparative study of using steel slag aggregate and crushed limestone in asphalt concrete mixtures
7. Barrett · 1980
8. C. Rao, T. Pan, E. Tutumluer, Determination of coarse aggregate surface texture using image analysis, in: Proceedings of the 16th ASCE Engineering Mechanics Conference. Seattle: University of Washington, 2013.
9. Quantification of coarse aggregate angularity based on image analysis10.3141/1787-13 ↗
10. Investigation of the shape, size, angularity and surface texture properties of coarse aggregates10.1016/j.conbuildmat.2012.02.096 ↗
11. Analysis of angularity of asphalt concrete recycled aggregate
12. The effect of morphological characteristic of coarse aggregates measured with fractal dimension on asphalt mixture’s high-temperature performance10.1155/2016/7982365 ↗
13. Microstructure study of WesTrack mixes from X-ray tomography images10.3141/1767-11 ↗
14. Characterization of air void distribution in asphalt mixes using X-ray computed tomography10.1061/(ASCE)0899-1561(2002)14:2(122) ↗
15. J. Anochie-Boateng, J. Komba, N. Makulenga, A. Maharaj, Evaluation of 3D laser device for characterizing shape and surface properties of aggregates used in pavements. 29th Southern Africa Transport Conference. Pretoria, South Africa, 2010.
16. Aggregate surface areas quantified through laser measurements for South African asphalt mixtures10.1061/(ASCE)TE.1943-5436.0000416 ↗
17. Three-dimensional laser scanning technique to quantify aggregate and ballast shape properties10.1016/j.conbuildmat.2013.02.062 ↗
18. Imaging-based direct measurement of aggregate surface area and its application in asphalt mixture design10.1080/10298436.2010.488734 ↗
19. E. Tutumler, H. Huang, Y. Hashash, J. Ghaboussi, Discrete element modeling of railroad ballast settlement. AREMA Annual Conference, 2007.
20. Degradation-related changes in ballast gradation and aggregate particle morphology10.1061/(ASCE)GT.1943-5606.0001706 ↗
21. Y. Qian, H. Boler, M. Moaveni, E. Tutumluer, Y. Hashash, J. Ghaboussi, Characterizing Ballast Degradation Through Los Angeles Abrasion Test and Image Analysis, 2014, 2448.10.3141/2448-17 ↗
22. Buchanan · 2000
23. Flat and elongated aggregates in superpave regime
24. A new measuring method for maximal length, width and thickness dimensions of coarse aggregates
25. Tutumluer · 2005
26. Influence of content of elongated and flaky particles on pavement performance of asphalt mixture
27. Coarse aggregate angularity and its relationship to permanent deformation of gravel-aggregate hot-mix asphalt in New York State10.3141/2207-04 ↗
28. Comparison of shape parameters for selected coarse aggregates in Oklahoma
29. Experimental testing and finite-element modeling to evaluate the effects of aggregate angularity on bituminous mixture performance10.1061/(ASCE)MT.1943-5533.0000386 ↗
30. Effect of aggregate shape on the surface properties of flexible pavement10.1007/s12205-014-0516-0 ↗
31. Measurement of aggregate texture and its influence on hot mix asphalt (HMA) permanent deformation