journal article·2018-11Open access

Influence of curing on pore properties and strength of alkali activated mortars

P.S. Mangat, Olalekan O. Ojedokun

Abstract

The paper investigates the effect of wet/dry, wet and dry curing on the pore properties and strength of an alkali activated cementitious (AACM) mortar. The pore characteristics were determined from the cumulative and differential pore volume curves obtained by mercury intrusion porosimetry. AACM mortars possess a bimodal pore size distribution while the control PC mortar is unimodal. AACM mortars have a lower porosity, higher capillary pore volume, lower gel pore volume and lower critical and threshold pore diameters than the PC mortar which indicate greater durability potential of AACMs. Wet/dry curing is optimum for AACM mortars while wet curing is optimum for the PC mortar. Shrinkage and retarding admixtures improve the strength and pore structure of the AACMs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Cements of yesterday and today – Concrete of tomorrow10.1016/S0008-8846(00)00365-3 ↗
2. John L. Provis, J.S.J. van Deventer, Alkali-Activated Materials State-of-the-Art Report, RILEM TC 224-AAM, 2014.10.1007/978-94-007-7672-2 ↗
3. A critical review on energy use and savings in the cement industries10.1016/j.rser.2011.01.005 ↗
4. Sustainability of alkali-activated cementitious materials and geopolymers
5. Neville · 2011
6. Assessment of permeation quality of concrete through mercury intrusion porosimetry10.1016/j.cemconres.2003.08.013 ↗
7. K.D. Stanish, R.D. Hooton, M.D.A. Thomas, Testing the chloride penetration resistance of concrete: a literature review, 1997.
8. Microstructure of the interfacial zone around aggregate particles in concrete
9. Sidney Mindess · 2003
10. Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete10.1016/j.conbuildmat.2013.12.010 ↗
11. J.C. Petermann, A. Saeed, M.I. Hammons, Alkali-activated geopolymers: a literature review air force research laboratory materials and manufacturing directorate, 2010.10.21236/ADA559113 ↗
12. Effect of curing temperature in the alkali-activated blast-furnace slag paste and their structural influence of porosity10.12913/22998624/64021 ↗
13. Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature10.1016/j.conbuildmat.2018.04.008 ↗
14. Effects of curing: comparison of optimised alkali-activated PC-FA-BFS and PC concretes10.1680/macr.13.00231 ↗
15. Chloride diffusion in alkali activated concrete
16. BS ISO 15901-1:2016 – Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Mercury Porosimetry, 2016.
17. Methods of testing cement – Part 1: determination of strength
18. Testing fresh concrete – Part 5: flow table
19. Silicate species of water glass and insights for alkali-activated green cement10.1063/1.4923371 ↗
20. Effect of molarity of sodium hydroxide and curing method on the compressive strength of ternary blend geopolymer concrete10.1088/1755-1315/80/1/012011 ↗
21. BS EN 12390-3:2009 Testing hardened concrete Part 3: compressive strength of test specimens, 2009.
22. BS EN 12390-7:2009, Testing hardened concrete. Density of hardened concrete – BSI British Standards, in: n.d. https://shop.bsigroup.com/ProductDetail/?pid=000000000030164912 (accessed June 21, 2018).
23. Sample mass and dimension effects on mercury intrusion porosimetry results10.1016/0008-8846(92)90121-B ↗
24. Sorptivity: a reliable measurement for surface absorption of masonry brick units10.1007/BF02482291 ↗
25. Self-curing concrete types; water retention and durability10.1016/j.aej.2015.03.027 ↗
26. Performance of concrete under different curing conditions10.1016/S0008-8846(96)85023-X ↗
27. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
28. Leaching model for a cement mortar exposed to intermittent wetting and drying10.1002/aic.690490523 ↗
29. Aligizaki · 2006
30. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
31. A discussion of cement hydration in relation to the curing of concrete
32. Influence of curing at different relative humidities upon compound reactions and porosity in Portland cement paste10.1007/BF02473055 ↗
33. Comparison between dcrit considering the abrupt variation and inflexion in the concrete mercury intrusion porosimetry curve10.1111/ext.12002 ↗
34. Porosity of cement paste cured at 45C as a function of location relative to casting position10.1016/S0958-9465(01)00093-2 ↗
35. M.Y. Balshin, Relation of Mechanical Properties of Powder Metals and their Porosity and the Ultimate Properties of Porous-Metal Ceramic Materials, 67 (1949) 831–834.